Posts Tagged ‘System on Chip’
Monday, February 17th, 2014
Next up in our series of predictions is the astute insight of Mike Demler, Senior Analyst with The Linley Group & MICROPROCESSOR report, and former EDA & Chip Design news analyst.
“It’s all about the ecosystem triad: EDA + foundry + IP. Cadence and Synopsys continue to evolve more in the IP direction, and there is really not much to say about the tools that hasn’t been said for a long time —just make it all work together! Redundant “standards” and artificial barriers to interoperability cost the semiconductor industry by lowering productivity. This is the problem with the disaggregated model. Back in the days when “real men” had fabs, companies could develop complete design flows without such obstacles.
The triad needs to work together to get over the stall inMoore’s Law at 28nm. Foundries are incurring delays in getting to 16/14nm FinFETS, and almost nobody is going to use 20nm. The chip industry needs an overall lower-cost solution in order to make sub-28nm processes economically viable. Forget 3D ICs, those will be niche products for a long time, about as popular as 3D TV.
Wednesday, February 12th, 2014
Bryon Moyer, Technology Editor at EE Journal, weighs in on what the chip industry needs from EDA and IP in 2014.
“At the low level, this is going to be the year where the push and pull between EDA companies and users determines how easy FinFETs are to design with.
At the high level, it feels to me like IP and EDA need to come closer together. For years, logic design has been done using text because higher-level languages allow better design abstraction and productivity for hand-crafted designs than prior schematic approaches did. When IP entered the scene, designs were mostly hand-done, with occasional bits farmed out to IP. But now IP dominates, whether internal or third-party. Rather than having a custom-logic paradigm that accommodates IP, it feels like we need to move more to an IP paradigm that accommodates custom logic. And it’s not just about logic either: mixed signal is everywhere, and should be included more seamlessly.”
Sunday, February 9th, 2014
Next up is Brian Bailey, Technology Editor/EDA, for Semiconductor Engineering, who has shared his forecast for EDA in 2014.
“Over the next couple of years there will be an increase in ASIC starts, but not all of these will be for the latest technology nodes or be the massive chips we have come to expect. The new starts will be smaller chips that form the leaves of the Internet of Things, things such as sensors with small amounts of processing and communications. They will be targeting older processes, such as 90nm. Margins on these devices will be slim but volumes high. I see the designers of these products requiring a different mix of capabilities in their EDA tools and different price points. It may create an interesting opportunity for the second tier EDA companies to become significantly bigger.”
Thursday, February 6th, 2014
Anindya Saha, Associate VP (VLSI) at Saankhya Labs, shares his insights on what EDA and IP vendors need to do for their users in 2014.
“Today the EDA and IP companies alike are in the race to cater to the big semiconductor players by offering the greatest IP in the latest process geometries. However, semiconductor startups, – such as Saankhya – do not change process nodes very quickly because it may not necessarily make business sense. Here is why.
‘Process design margins’ is a fact of life, which we need to add when we use the latest process nodes. Incorporating these design margins simply adds to the overall SoC design cycle time which we want to keep to a minimum. Hence staying with the older process nodes may be a more prudent choice. When we look at the IP domain, we can categorize the available IPs into the following buckets – Analog IPs, Standard Cell and Memory IPs, Processor Soft Cores and Connectivity IPs. Besides the usual PPA (Power, Performance and Area) metrics, what we look at for each of these categories is the metric of Power Efficiency. This metric can be based on mW/Mhz or in some cases mW/sq. mm depending on the kind of tradeoffs which we intend to do at System level.
The following are some of the issues I feel EDA and IP companies should address, especially in the domain of standard cell and memory IPs which are commonly used in almost all ASIC Designs today. (more…)
Monday, February 3rd, 2014
Robert Beanland, Senior Director, Corporate Marketing at Atrenta, weighed in on what EDA and IP vendors need to do in 2014.
“Ahhh, the age old question of, ‘What does EDA and IP need to do this year?’ Well, …
The IP folks need a way to provide fully validated IP to their customers with not only a good understanding of all the validation that has been done, but also the expected use model and configurations for the IP. The use model is critical because it is quite common for IP to be ‘abused’ in a way or mode that the IP vendor never expected. When this happens, the customer must be able to assess the problem in-situ and work with the IP vendor to find a resolution. A standardized quality metric is much more desirable than the current option of comparing each vendor’s unique assessment of their validation. This validation and analysis should include, but is not limited to, power, clock domains, testability and physical. The ‘clean’ IP can then be used with more confidence by their customers in their SoC integration.
Wednesday, January 29th, 2014
Next up in our series is Simon Bloch’s forecast for 2014. Simon is Sr. Director of Samsung Electronics R&D, in mobile consumer wireless devices.
“The future of electronics is looking bright! Market forecasters predict growth in literally every category of electronic markets ranging from smart mobile and wearable devices, appliances and sensors connected to a network of Internet of Everything to smart connected cars and cities.
In today’s electronics products, sophisticated hardware is becoming insufficient for product success. Many layers of stacked software control the underlying hardware and determine a product’s competitiveness via functionality, performance, power and cost. And while there is always going to be a need to create new semiconductor components and IC companies will need EDA tools, EDA vendors need to expand the view of Electronics and treat software stack as an integrated part of EDA.
There are many opportunities to come up with products in the software stack space around Linux/Android operating systems and in the area of hardware virtualization. Just last month, CyanogenMod, a company that provides Android based software widely used in the mobile industry, secured $23 million in funding from top tier VCs. CyanogenMod is a software stack product and contains many features not found in Google versions of the operating system.
Monday, January 27th, 2014
We asked Mike Gianfagna, VP of Marketing at eSilicon and former VP of Corporate Marketing at Atrenta, about EDA, IP and the chip industry in 2014.
Ed: What does EDA and IP need to do in 2014?
Mike: Work more effectively with each other. IP integration continues to be a huge bottleneck for SoC design. A more uniform quality metric and a way to enforce it is desperately needed. This problem can’t be solved in isolation. EDA and IP companies need to collaborate to tame this issue. They can do it.
Ed: What does the chip industry want from EDA and IP in 2014?
Mike: The same thing really. Every SoC project is dependent on somebody’s IP. Whether it’s internally supplied or provided by your favorite IP supplier or your favorite ASIC supplier, the requirement for easy integration with no surprises is the same. Better collaboration between members of the SoC supply chain will definitely help.
Monday, September 30th, 2013
There’s an EDA industry reunion at the Computer History Museum on October 16th. “EDA: Back to the Future” is being put on by EDAC along with several sponsors, and it looks like it will be a night to remember. To learn more about the event and purchase tickets click here.
Part of this event is a fund raising auction. I recently talked with Mike Gianfagna at Atrenta about the auction to understand what that part is all about.
Ed: Mike, I understand that part of the event on October 16th is a fund raising auction. Can you tell me a little about that?
Mike: Sure Ed. The Computer History Museum is working on an exhibit for EDA – one that captures the rich history of this industry and preserves some of its innovation in the form of physical artifacts and some of its pioneers in the form of oral histories, captured on video. It’s a terrific project, but we need money to keep the progress going. The auction on the evening of October 16th is focused on raising that money.
Wednesday, August 28th, 2013
Atrenta will discuss what RTL signoff requirements are needed for SoC designers in China, South Korea and Taiwan at their upcoming seminars in September and October.
Click here for more information.
LPR does work for Atrenta
Tuesday, August 20th, 2013
We often think that we’ve got the timing job nailed down and that there aren’t any problems that we can’t easily, almost routinely solve. Using timing exceptions to optimize synthesis or P&R shouldn’t be a problem.
However, making an error when specifying timing exceptions can possibly shut down a design project.
Take a look at what Atrenta’s Shaker Sarwary, Ramesh Dewangan and Sridhar Gangadharan say about how to avoid this situation:
(Note: white paper download requires registration)
LeePR does work for Atrenta.