Open side-bar Menu
 EDACafe Editorial

Posts Tagged ‘LSI’

Gary Smith: EDA’s Master Oracle

Thursday, October 31st, 2013

 

[Editor’s Note: An abbreviated version of this article first appeared on-line on in July 2001, and again in May 2004 when Gary Smith was engaged to be married to Verisity’s Lori Kate Calise.]

**********************

Starting and ending with the Tao is pretty enigmatic stuff when, in the middle of the stream, you find a bass-toting, black-leather-clad blues musician fresh out of the Naval Academy living in a shack in the midst of Silicon Valley. That pretty much summarizes Gary Smith for those who know him. For those who don’t, to quote from an introduction to Gary I heard at a panel last year where he was acting as moderator: “If anyone in this room doesn’t know who Gary Smith is, they don’t belong in this room.”

For a number of years, Gary Smith has been the single most important prognosticator in EDA. The industry listens to Gary, at DAC and a thousand other venues over the course of the year. They bank on his annual numbers reporting on the health of the industry. They pin his EDA Landscape poster up on the wall to keep track of which companies are which in the here today/acquired tomorrow world of EDA. They take their business plans and nascent product ideas to him and hope for his blessings. They quote him. They court him. They keep him busy, and apparently he loves it – taking all of the adulation in stride with a smile and a nod, which is what you would expect from a guy who takes Eastern philosophies seriously and incorporates them into his mindset and lifestyle.

The rest of Gary’s story is as follows. However, if you believe as Gary does that less is more, you needn’t read on. Based on what you’ve read, you already know him.

(more…)

DAC 2013: Top 10 from Day 2 in Austin

Tuesday, June 4th, 2013

 

The only thing most people remember about Tuesdays at DAC are the parties. You’re a success if you attended at least two, less than a success if you only attended one, and guaranteed immortality if you attended more than three.

Of course, other things happen on Tuesdays at DAC – early morning breakfasts where sincere technologists present and/or opine about somber challenges facing the industry, the plenary session, presentation of multiple awards, pavilion panels, mid-day luncheons, afternoon sessions, posters, and many, many hours logged in by booth staff talking and talking and talking to customers, potential customers, and general industry hangers-on looking for free give-aways.

(more…)

DAC 2012: Terrible Tuesday in San Francisco

Tuesday, May 8th, 2012

 

DAC looms!

And never more so than on Tuesday — especially this year, June 5th, when you’re going to have to make some terrible decisions about what to miss, and what not to miss.

First there’s the opening session in the morning when a boatload of awards are handed out, followed by the 2012 keynote. The Exhibition Hall won’t open until these things wrap up, so other than company meetings or company special-product announcement breakfasts, you should be able to be in the main theater at Moscone from 8:30 to 10:00 am or so.

Of course, worst case scenario: The opening session at DAC is always video-taped, so you could watch it at a later date after it’s uploaded to the DAC website but that’s hardly ideal.

This year’s main address will be delivered by ARM’s Mike Muller, “comparing the original ARM design of 1985 to those of today’s latest microprocessors … how far design has come and what EDA has contributed to enabling … systems, hardware, operating systems, and applications.” Then Muller plans to talk about 2020, how to get there, and what it will be like when we do. Conclusion? This stuff’s better heard in person than tape delayed. Go to the opening session, and plan not to regret it.

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise