Posts Tagged ‘CEDA’
Thursday, September 29th, 2016
Dr. Andrzej J. Strojwas, professor of Electrical and Computer Engineering at Carnegie Mellon University, has been named recipient of the 2016 Phil Kaufman Award for Distinguished Contributions to Electronic System Design.
Interestingly, this is the first year that the Kaufman award is being presented for contributions to Electronic System Design, not EDA. Very appropriate given that Strojwas’ contributions are in manufacturing and not design. Prof. Stojwas is CTO at PDF Solutions, which per company CEO John Kibarian has never been an EDA company. And with Kibarian serving as co-chair of the ESD Alliance, the organization formerly known as EDAC has now fully embraced its role across the entirety of electronic system design.
Besides this nod to EDAC’s ongoing evolution, the larger implications in CEDA and the ESD Alliance naming Andrzej Strojwas as this year’s Kaufman recipient are profound: The problems associated with electronic systems are not so much in the design these days, but in the extraordinary difficulties associated with manufacturing those designs. It’s really tough, as you all know, when the structures being manufactured are smaller than the wavelengths of light used to etch them.
Which bring us back to Dr. Strojwas. He has been CTO at PDF for 20 years. Back in the last century/millennium, the problems of manufacturing below 193 nanometers could only have been guessed at, yet the company was already working on the intriguing issues of capturing post-manufacturing data and somehow packaging it up to make it useful: How does the semiconductor supply chain glean vital information about the vagaries of manufacturing a real chip and send it back up to the designers so they can learn from the reality when they put pen to paper to design the next hypothetical?
This engineering of the engineering demands scientific curiosity, steely eyed attitudes towards the realities of physics and material science, and a large dollop of business savvy to navigate between the needs and demands of the foundries and the needs and demands of the designers. Let’s allow Dr. Strojwas to take it from here. We spoke by phone this week after his award was announced.
(more…)
Tags: 2016 Phil Kaufman Award, Andrzej Strojwas, Carnegie Mellon University, CEDA, Chenming Hu, Design for Manufacturing, EDA Consortium, ESD Alliance, IEEE Council on Electronic Design Automation, John Chen, John Kibarian, Larry Pileggi, Moore's Law, PDF Solutions, Randy Bryant, Rick Wallace, Rob Aitken, Ron Rohrer, Semitech, Shishpal Rawat, SRC, Stephen Director, Texas Instruments, Wojciech Maly
2 Comments »
Thursday, July 14th, 2016
Intel’s Shishpal Rawat has been Chair of Accellera for 6 years and is currently serving as President of CEDA, IEEE’s Council on Electronic Design Automation. In previous discussions, Rawat has insisted that his leadership is not what makes these organizations work. Only the enthusiastic efforts of the many members guarantee that both Accellera and CEDA continue to shape ideas, standards, and forward progress within design automation and its adjacent technologies.
Two years ago, I enjoyed a lengthy interview with Rawat about all of this, described here. This year, I’ve chatted with Rawat at DVCon in San Jose in March, and again by phone just prior to DAC in June. During the phone call, Rawat focused on CEDA’s activities at DAC in Austin. He told me the upcoming Sunday night panel, set to be moderated by SRC’s Bill Joyner on June 5th, was a new and very exciting addition to the DAC program.
(more…)
Tags: Accellera, CEDA, Council on Electronic Design Automation, DAC, DAC Young Faculty Workshop, DATE, Design Automation Conference, DVCon, ICCAD, IEEE
No Comments »
Tuesday, June 7th, 2016
A big 10-gallon hats-off to Charles Alpert & Team for injecting fresh creativity and energy into the 53rd annual Design Automation Conference. Those who knew little about Alpert, and I’m among those few, were overwhelmed by the DAC General Chair and Host of the Opening Session who took the stage Monday morning in Austin.
Straightaway, Charles shed his corporate persona in favor of his Texas roots, welcomed us all to his home town, asked that we call him Chuck, offered photos and first names only of the entire DAC Executive Committee, showed us a map of a new and innovate layout for the DAC Exhibit Hall – including a central boulevard that Baron Haussmann himself would have celebrated – and then asked us to help him do two things:
Keep Austin Weird, apparently a principle plank in the City’s Charter, and ergo to Keep DAC Weird, as well as Nerdy, Fun and Alive. And no sooner did Chuck extend this request, than it was …
(more…)
Tags: 53rd Design Automation Conference, Anna Balazs, Anne Cirkel, Bob Smith, CEDA, Charles Alpert, Chris Rowen, DAC 2016, ESD Alliance, Jiang Hu, Lars Reger, Marie Pistilli, Michael McNamara, Nicole Amoaka, NXP/Freescale, Pat Pistilli, Peng Li, Sharon Hu, Shishpal Rawat, Soha Hassoun, Steve Levitan, Wally Rhines
No Comments »
Thursday, November 12th, 2015
Joyful relief probably best describes this evening’s event at the Fourth Street Summit Center in San Jose where the glitterati of EDA gathered to honor Mentor CEO Wally Rhines with a long-overdue CEDA/EDAC-sponsored Kaufman Award. Joyful relief and a sense of delicious mischief.
One should have known something was up when the trio in the corner – during cocktails on the 7th floor overlooking scenic downtown San Jose – launched into a tango so compelling one was forced to look over to the source of the music. Surprisingly and not surprisingly, it included Bob Gardner on bass. Tango and all, the music sashayed its way through the lively mesh of conversation that defined the crowded room in that pre-dinner hour.
When enough yummy hors d’oeuvres had been consumed, and just the right amount of Jazz Cellars wine – the winemaker himself now serving as the Executive Director of EDAC – the gong sounded, doors opened at one end of the room, and huge clumps of happy revelers jostled into the adjoining hall to seek out their assigned tables and grab their chairs, all anticipating good food and great fun.
With at least 200 people in attendance, CEDA and EDAC did not disappoint. Of course, it’s hard to avoid a home run when the irrepressible Wally Rhines is at the center of the play, but this evening CEDA/EDAC delivered up something more akin to a grand slam.
(more…)
Tags: Aart de Geus, Bob Smith, CEDA, Don Pederson, EDAC, Gary Smith, Greg Hinkley, IEEE, Jazz Cellars, Lip-bu Tan, Lori Kate Smith, Morris Chang, Phil Kaufman Award, Rich Templeton, Richard Newton, Rick Clemmer, Ron Rohrer, Shang-Yi Chiang, Shispal Rawat, SMU, Stanford, U.C. Berkeley, Wally Rhines
1 Comment »
Thursday, June 11th, 2015
It’s always hard to capture the spirit of any particular trade show/tech conference when it’s as large as DAC. So here’s just a small sample of the rumors and realities being bandied about at Moscone Center this week in San Francisco.
* Rumor: The Exhibit Hall ran until 7 pm on Wednesday night, so if you wanted to see the bagpipes close out the show, you could see it if you arrived at the Cadence booth by 6:45 pm.
* Reality: The Exhibit Hall closed at 6 pm on Wednesday, not 7 pm as on Monday and Tuesday. The bagpipes closed out the show, but at 6 pm, not 7 pm. Those who missed it were very, very sad.
* Rumor: DAC’s Exhibition Hall has shrunk so much over the last few years, it’s no longer going to be housed at Moscone Center. After next year’s DAC 2016 in Austin, the show’s headed to the San Jose Convention Center in 2017.
* Reality: Moscone Center is being renovated over the next several years, so DAC’s going to be in Austin in 2016, in Austin in 2017, and (probably) back in San Francisco in 2018.
(more…)
Tags: Cadence, CEDA, Common Platform, DAC, Design Automation Conference, GlobalFoundries, Imagination Technologies, L.A. Clippers, Mentor Graphics, MIPS, Moscone Center, San Jose Convention Center, SMIC, Synopsys, TSMC
No Comments »
Thursday, June 11th, 2015
Most mortals at the end of the day on Monday this week in San Francisco polished off their beers on the DAC Exhibit Hall floor at 7 pm and headed out for dinner and some R&R to prepare for the rigors of Tuesday. For those truly passionate about the future of Design Automation, however, Monday’s labors did not end at 7 pm. They had only begun.
Because in Room 300 from 7 pm to 8 pm, a series of visionary talks were offered — not one of them more than 3 minutes long — each proposing a different direction that the highly skilled DA community might take this industry by capitalizing on its vast expertise in optimization, algorithms, and hardware/software co-design. It was a great hour of presentations, which by the way was also a contest, complete with a panel of judges who got to choose the top three proposals and award cash prizes.
(more…)
Tags: Andrew Kahng, CEDA, DA Perspective Challenge, DAC, Design Automation Conference, IEEE Council on Electronic Design Automation, Shishpal Rawat
2 Comments »
Thursday, September 25th, 2014
Last week I had a chance to chat by phone with Accellera Chair Shishpal Rawat, and when I say chance that’s accurate. Rawat is so busy these days, it’s hard to believe he has time for any extraneous conversations. Not only does he have a full-time job at Intel, he has been chair of Accellera for four years and now is ramping up to take over the reins at CEDA at well.
Among other activities, both Accellera and CEDA sponsor several key conferences in the industry. Accellera is the primary sponsor of the Design and Verification Conference and Exhibition (DVCon). I asked Shishpal about this year’s efforts to take DVCon on the road and how that dovetails with the changes he’s seen at Accellera over his years of leadership.
He said, “Without a doubt, the biggest change is the international outreach that we are now doing in our programs. DVCon will debut in Bangalore this month and will debut in Europe next month on October 14th and 15th in Munich. Expanding the conference this way has required a great deal of work on the part of local dedicated volunteers in both India and Europe, in addition to the efforts of our established corps of hardworking people. We expect a very big group of attendees at both of these shows, which adds to the work load for everyone involved.”
(more…)
Tags: Accellera, Cadence, CEDA, Dennis Brophy, DVCon, IEEE Standards, Intel, Jill Jacobs, Karen Pieper, Mentor Graphics, Shishpal Rawat, Synopsys, System Verilog AMS standard, SystemC, UPF, UVM, Verilog
No Comments »
Tuesday, June 4th, 2013
The only thing most people remember about Tuesdays at DAC are the parties. You’re a success if you attended at least two, less than a success if you only attended one, and guaranteed immortality if you attended more than three.
Of course, other things happen on Tuesdays at DAC – early morning breakfasts where sincere technologists present and/or opine about somber challenges facing the industry, the plenary session, presentation of multiple awards, pavilion panels, mid-day luncheons, afternoon sessions, posters, and many, many hours logged in by booth staff talking and talking and talking to customers, potential customers, and general industry hangers-on looking for free give-aways.
(more…)
Tags: Aart de Geus, Bob Madge, Cadence/Denali, CEDA, Ed Lee, Freescale, GlobalFoundries, Gutenberg, Hermann Kopetz, IBM, J.C. Parker, Jose Nunez, Kee Sup Kim, LSI, Rex Berridge, Samsung, Soha Hassoun, Solomon Golomb, Stars of IP, Stephen Woo, Synopsys
No Comments »
Wednesday, April 3rd, 2013
The EDA Consortium and the IEEE Council of EDA together announced today the recipient of this year’s Phil Kaufman Award for distinguished contributions to EDA – Chenming Hu, TSMC Distinguished Professor of the Graduate School at U.C. Berkeley.
Per the Press Release: “Dr. Chenming Hu is being recognized for his contributions in device physics, device modeling, and device reliability through BSIM and BERT models that have transformed the semiconductor manufacturing and EDA industries. Dr. Hu’s team invented the revolutionary 3D finFET transistor structure that simultaneously achieves size and power reduction to enable continued scaling of the microelectronic chips.”
Prof. Hu is a marvelous choice on the part of both EDAC and CEDA, but it is important to note that his contributions in EDA are the basis for the Phil Kaufman Award, not his work on the finFET – even though the latter is the hot topic in semiconductors today.
(more…)
Tags: Aart de Geus, CEDA, Chenming Hu, Donatella Sciuto, EDAC, Phil Kaufman Award
No Comments »
Thursday, November 22nd, 2012
If you are looking for an opportunity to express your satisfaction with a colleague’s contributions to the world you work in, two outstanding chances currently present themselves. But take care: The deadlines for submitting your nominations quickly approach.
First, Accellera Systems Initiative [a.k.a. Accellera] has set January 18th as the deadline for submitting nominations for its 2013 Technical Excellence Award. Per the organization: “The Award recognizes outstanding contributions in the creation of EDA and IP standards [which are then contributed to the IEEE Standards Association] by a member of an Accellera technical committee.
“Any individual who is a member of an Accellera technical committee is eligible to receive the award, which will be presented at Accellera Systems Initiative Day during DVCon 2013 next February in San Jose. Candidates may be nominated by the industry at large and are endorsed by Accellera committee members. To nominate an individual, visit Accellera.org.”
If you want to do something really dramatic, however, the EDA Consortium is currently accepting nominations for its annual EDAC/CEDA-sponsored Phil Kaufman Award, which these organizations frequently refer to as the Noble Prize of EDA.
(more…)
Tags: Accellera Systems Initiative, Accellera Technical Excellence Award, CEDA, DAC, EDAC, ICCAD, IEEE Standards Association, Kaufman Aard
No Comments »
|
