Posts Tagged ‘eda 2 asic Consulting’
Thursday, March 29th, 2012
This event is happening next week! Worth signing up if you can get down
there!………
EDPS is coming up again! It’ll be held April 5-6, 2012 at the Monterey Beach Hotel in Monterey California.
This year, the 3D topic will be the focus of day two.
First and foremost, Riko Radojcic, director of engineering at Qualcomm, will be talking about the 3D IC roadmap as the keynote speaker on day two. (see his views on 3D standards: http://www10.edacafe.com/blogs/ed-lee/2011/04/11/riko-radojcic-on-3d-standards/
Following the 1-hour keynote will be four 1/2 hour talks on various specific 3D-related topics:
* Stephen Pateras of Mentor on BIST for 3D ICs
* Arif Rahman of Altera on FPGA design challenges, presumably 3D ones
* Marc Greenberg of Cadence on the wide-IO standard for putting memory stacks on processors
* Sandeep Goel of TSMC and Bassilios Petrakis of Cadence on an end-to-end test flow for 3D IC stacks
Then there’s a lunch panel on 3D, moderated by Steve Leibson of Cadence, with these panelists addressing: The short-, medium and long-term path to the 3D Ecosystem.
* Herb Reiter
* Samta Bansal of Cadence
* Dusan Petranovic of Mentor
* Deepak Sekar of Monolithic 3D
* Steve Smith of Synopsys
* Phil Marcoux of PPM Associates
Herb is arguably the primary 3D observer and advocate on what technologies have to be in place to handle the upcoming 3D challenge that’s starting to hit designers now.
John Swan is the General Chair of EDPS 2012. Herb Reiter is the Session Chair for the keynote, four shorter presentations and the panel discussion during “3D Day”, Friday, April 6.
Very worthwhile to attend if you can get the time off.
Tags: 3D, 3D Ecosystem, 3D IC, Altera, Arif Rahman, Cadence, Chip Design, chip designers, DAC, Deepak Sekar, Dusan Petranovic, EDA, eda 2 asic Consulting, EDPS, Electronic Design Automation, Electronic Design Process Symposium, Herb Reiter, IEEE, John Swan, Marc Greenberg, Mentor, Monolithic 3D, Phil Marcoux, PPM Associates, Riko Radojcic, Samta Bansal, Sandeep Goel, semiconductors, Stephen Pateras, Steve Leibson, Synopsys, TSMC
No Comments »
Thursday, March 22nd, 2012
EDPS is coming up again! It’ll be held April 5-6, 2012 at the Monterey Beach Hotel in Monterey California.
This year, the 3D topic will be the focus of day two.
First and foremost, Riko Radojcic, director of engineering at Qualcomm, will be talking about the 3D IC roadmap as the keynote speaker on day two. (see his views on 3D standards: http://www10.edacafe.com/blogs/ed-lee/2011/04/11/riko-radojcic-on-3d-standards/
Following the 1-hour keynote will be four 1/2 hour talks on various specific 3D-related topics:
* Stephen Pateras of Mentor on BIST for 3D ICs
* Arif Rahman of Altera on FPGA design challenges, presumably 3D ones
* Marc Greenberg of Cadence on the wide-IO standard for putting memory stacks on processors
* Sandeep Goel of TSMC and Bassilios Petrakis of Cadence on an end-to-end test flow for 3D IC stacks
Then there’s a lunch panel on 3D, moderated by Steve Leibson of Cadence, with these panelists addressing: The short-, medium and long-term path to the 3D Ecosystem.
* Herb Reiter
* Samta Bansal of Cadence
* Dusan Petranovic of Mentor
* Deepak Sekar of Monolithic 3D
* Steve Smith of Synopsys
* Phil Marcoux of PPM Associates
Herb is arguably the primary 3D observer and advocate on what technologies have to be in place to handle the upcoming 3D challenge that’s starting to hit designers now.
John Swan is the General Chair of EDPS 2012. Herb Reiter is the Session Chair for the keynote, four shorter presentations and the panel discussion during “3D Day”, Friday, April 6.
Very worthwhile to attend if you can get the time off.
Tags: 3D, 3D Ecosystem, 3D IC, Altera, Arif Rahman, Cadence, Chip Design, chip designers, DAC, Deepak Sekar, Dusan Petranovic, EDA, eda 2 asic Consulting, EDPS, Electronic Design Automation, Electronic Design Process Symposium, Herb Reiter, IEEE, John Swan, Marc Greenberg, Mentor, Monolithic 3D, Phil Marcoux, PPM Associates, Riko Radojcic, Samta Bansal, Sandeep Goel, semiconductors, Stephen Pateras, Steve Leibson, Synopsys, TSMC
No Comments »
Thursday, February 9th, 2012
To finish off our series of predictions, I would like to point you to another series of interesting and informative prophesies. Click on the following topics to see these predictions collected by Brian Bailey, Editor of EDA DesignLine.
Industry Trends
Tools
ESL
IP and Physical Design
The Bold Prediction for EDA
A big THANK YOU from Ed & me (Liz) to all who shared their eye opening predictions with us. Click on their names to see their predictions. Mike Gianfagna, Karen Bartleson, Paul McLellan, Jens Andersen, Bob Smith, Steve Schulz, Mathias Silvant, Herb Reiter, Max Maxfield, Chris Edwards, John Barr.
Only time will tell……
 The Persistence of Memory, 1931, Salvador Dali
Tags: 2.5D, 2012, 3D, 3D stacked die, Ansys, Atrenta, Cadence, Dassault, Double Patterning, EDA, EDA & IP, eda 2 asic Consulting, EDA DesignLine, EDA360, EdXact, Electronic Design Automation, Engineering & Technology, FPGA, Invarian, investment, IP, Lee PR, Lithography, low power, Low Power Design, Low-Power Design Blog, Magma, Maxfield High-Tech Consulting, Mentor, Needham, New Electronics, Programmable Logic, Programmable Logic DesignLine, publishing, Semi-wiki.com, Semiconductor IP, semiconductors, Si2, SoC, SoC Realization, social media, software, Standards, Synopsys, System on Chip, Tech Design Forum, textbooks, www.leepr.com
No Comments »
Tuesday, January 24th, 2012
A number of 2.5D IC designs will hit the market and demonstrate both the value of 2.5/3D technology as well as the importance of powerful and user-friendly tools for “Pathfinding”, to quickly identify the best (lowest cost) implementation alternative.
Herb Reiter
President
eda 2 asic Consulting, Inc.
www.eda2asic.com
Tags: 2.5D, 2012, 3D, 3D stacked die, EDA, EDA & IP, eda 2 asic Consulting, Electronic Design Automation, IC Design, Inc., Lee PR, semiconductors, Standards, www.leepr.com
No Comments »
|
