Open side-bar Menu
 What Would Joe Do?

Posts Tagged ‘MATLAB’

Canada’s Space Codesign: Calm, Cool and Collected

Thursday, October 25th, 2012

 

Montreal is not a place that normally comes to mind when you think of EDA. Space Codesign Systems, however, is on a fast track to change that in a classically Canadian way – calm, cool, and collected.

When I spoke with General Manager Dr. Gary Dare on a beautiful afternoon in Southern France at SAME Forum in early October, he explained how the company started in Canada, and the road map they have set out for themselves: “We’re an EDA company, an EDA startup, and we are definitely based in Montreal. If you doubt that EDA has a place in Canada, we will soon convince you otherwise.

“Space Codesign comes from the acronym, SystemC Partition of ACE, which was the 2004 research project at the Ecole Polytechnique [University of Montreal] that our technology is based on. In 2008, Professor Guy Bois and various graduate students associated with the project decided to do a spin-out, and in 2010 Space Codesign Systems went into operation.”

He laughed and added, “Our company has nothing to do with space, however. But it has everything to do with hardware/software co-design – doing it simultaneously, rather than the usual way of ESL hardware design followed by software design. The audience we are targeting is the systems architects who are looking at the algorithmic level and need a route to design exploration and implementation. Our tools give them that route.

(more…)

MathWorks: the elephant in the room

Wednesday, July 18th, 2012

 

To get to MathWorks’ corporate headquarters outside Boston, take the Red Line to the Orange Line to Back Bay Station. Take the Commuter Rail to Natick, cross the bridge over the tracks, walk north along leafy Walnut Street for a mile and a quarter, turn left onto Route 9, and cross the grass to Apple Hill Drive. Turn left into the parking lot of the company’s campus, pick your way through the construction going on there, and look for the main reception building across from the big parking structure.

If you do all of this, and it’s 90+ degrees with 60% humidity, you’ll be totally drenched by the time you walk into the cool of the MathWorks headquarters. But no worries; the very nice person at the reception desk will send you down the hall to the closest break room where you can get a tall drink from the beverage dispenser and bring it back to the reception area to rest, recuperate, and prepare for your meeting with Ken Karnofsky.

Okay, two points of interest here: a) MathWorks is different. It’s headquartered in a residential neighborhood, not a commercial park; and b) the welcome is relaxed and not the high-pressure stuff of Silicon Valley.

Two additional points of interest: c) MathWorks is expanding. They’ve got 2400 employees currently, with an additional 200 job openings! Their Natick campus may offer a calm retreat from a humid Massachusetts afternoon, but it’s not a calm retreat from the world because when you’re there, MathWorks feels to be at the center of the world.

And d) MathWorks is definitely an EDA company, even though they don’t belong to EDAC and they don’t exhibit at DAC (although they have exhibited in the past). If you design chips, MathWorks’ MATLAB and Simulink is the gateway into your design. When it comes to EDA, MathWorks is most definitely the elephant in the room.

(more…)

CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy