Basically I am making a solar inverter without any battery or charge controller that will directly convert the dc output coming from solar panels (6 connected in parallel) into 220V AC.I am using solar panels 50W each, having an open circuit voltage of 20V and the voltage varies between 15-20V during the entire day provided a minimum amount of sunlight is there. Next, I am using a 12V buck converter circuit using an LM2576 and few more components to get a stable output voltage of 12V out of the panels. Now this 12V DC is fed to an inverter circuit which converts it into a square/modified sine wave 220V AC at approximately 50Hz. But, I am not getting desirable power output. From 6 panels, all I am able to power is a 45W LED bulb along with a small 3W LED bulb.Here is the datesheet of lm2576
Probably, one problem is with LM2576 buck converter IC. This IC although providing a constant 12V output but it is rated at a 3A fixed output current. And I think probably this is the reason why we are unable to drive more loads. Is there a way to amplify current in this case? Or something else should be done which I am missing here ?