Chris Scholz

Today we wrap up our interview with Chris Scholz, Product Manager, Vector Network Analyzers, R&S North America, discussing the different approaches to Signal Integrity.

Ed:  It’d be great if you could give us a brief comparison on approaches you’ve dealt with.

Chris:  Sure! Signal Integrity applications use baseband data with bandwidth up to 10s of GHz impedance, matching of DUTs in Signal Integrity applications is relatively poor. Looking at TRL-based calibration techniques that have been automated by some vendors, these techniques generally fail to provide accurate results beyond a few GHz.

Ed:  What’s TRL?

Chris:  Thru-reflect line.

For our customers, in-situ de-embedding (ISD) has shown to be the most accurate de-embedding technique available to date. One of the nice side effects of ISD is that it results in causal measurements what are beneficial for further processing standard design tools.

Because the Signal Integrity engineers deal with baseband signals, they face a set of unique challenges that are marginally important for RF engineers. For wireless systems, transmission channels are narrow band and separated from each other.

By contrast, Signal Integrity deals with baseband signals. This means that signals experience impairments that span from close to DC to the maximum frequency that the channel supports. This also means that digital signals are prone to picking up low frequency impairments such as power supply noise, they are prone to frequency dependent loss at high frequencies and they pick up broadband impairments such as various types of crosstalk.

(more…)

Chris Scholz

Today’s excerpt with Chris Scholz, Product Manager, Vector Network Analyzers, R&S North America, focuses on the SI tools that engineers will need to meet the SI challenge in 2016. 

Ed:  What tools do you see engineers using and how well do they handle this oncoming SI challenge?

Chris:  Vector Network Analyzers have the reputation of being complicated and were considered a specialist tool for ultra-precise measurements and for calibration labs.   This SI tool technology has changed, for the better.

Today’s modern computing technology and graphic user interfaces arm any lab technician (with minimal training) to produce reliable and trustworthy VNA measurements. So with modern VNAs, you get the best of both worlds: precise measurements to a well-defined reference plane and ease of use of a modern test tool.

This is of special interest for SI applications where test strategies are traditionally centered around time-domain measurements such as eye diagrams, jitter margins, equalizers and time-domain reflectometry. Today’s VNAs can perform all these measurements and the results tend to be more accurate and repeatable than with traditional tools.

(more…)

Chris Scholz

We recently had a chance to sit down with Chris Scholz, Product Manager, Vector Network Analyzers, R&S North America at German electronic equipment manufacturer Rohde & Schwarz. For those of us who aren’t familiar with Rohde & Schwarz, it’s a worldwide electronics group company with business fields in test and measurement, broadcast and media, secure communications, cybersecurity and radio monitoring/radio location. Based in Munich, R&S was founded in 1933 and has had a U.S. presence for years.

We got together with Chris to hear what was the big design issue his engineers were encountering as 2016 approached. Here’s what he had to say.
……………………………………………

Today’s excerpt gives us some background on Rohde & Schwarz and Signal Integrity. 

Ed:   Chris, before we get into the heart of our discussion, it might be good to give us a brief rundown on who Rohde & Schwarz is.

Chris:   Sure, Ed.   Rohde & Schwarz is primarily known for our leadership in RF, microwave and millimeterwave technology. We were founded in 1933 and are based in Munich.  We have close to 10,000 employees.
(more…)