Plots: A New Way To Analyze Data

Data analysis is often a very time consuming process for a hardware design or verification engineer. We always end up using the waveform viewer which may not be very efficient in giving us a high-level overview of what we’re looking for. Data that is spread across a long simulation cycle is very hard to visualize on the waveform. Whenever I have to analyze a huge chunk of data, I always wonder what would be the best way to do it. It is often cumbersome to go through even a millisecond’s worth of waveform data to analyze the bigger picture. There are of course other tools that can take a VCD file and perform an analysis but that involves buying and learning to use an additional tool.

Sometimes it’s not feasible to invest time and money into new tools. So we always go back to our trusty waveform viewer to make sense of the results. But what if there is a better way of analyzing such data, especially if you are doing some kind of signal processing application and have a lot of data that you would rather view in a format other than the time domain based representation of a waveform? For example, imagine you are trying to visualize the data of an FFT engine. On a waveform, it is next to impossible to visualize this.

In Riviera-PRO we have the Plots feature which can help you. The plot window ties directly to the simulation database, so you don’t have to code anything new or learn a new tool. Just with a few clicks you can add objects to the plot viewer and, based on the settings, it will generate a plot of that object. Sounds very simple but it gives you a bigger picture of what your design object is doing over the course of the entire simulation, rather than just the slice you can see on the waveform between two points of time.

For the rest of this article, visit the Aldec Design and Verification Blog.

Tags: co-simulation, debugging, DSP, hardware, plots, processing, Riviera-PRO, signal, simulation, verification, waveform

Categories: FPGA Design, Functional Verification

This entry was posted on Wednesday, November 29th, 2017 at 2:01 pm. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.