October 09, 2006
Verification Test Plan: The Book
Please note that contributed articles, blog entries, and comments posted on EDACafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.
Peggy Aycinena - Contributing Editor

by Peggy Aycinena - Contributing Editor
Posted anew every four weeks or so, the EDA WEEKLY delivers to its readers information concerning the latest happenings in the EDA industry, covering vendors, products, finances and new developments. Frequently, feature articles on selected public or private EDA companies are presented. Brought to you by EDACafe.com. If we miss a story or subject that you feel deserves to be included, or you just want to suggest a future topic, please contact us! Questions? Feedback? Click here. Thank you!

Missed the movie? Here's the book!

I don't know about you, but I had a time conflict on the morning of Thursday, July 27th, and hence couldn't attend one of the key panel discussions that took place that day in San Francisco at the 2006 Design Automation Conference in Moscone Center.

This not-to-be-missed panel showcased several of the leading gods of verification, and their friends, as they discussed issues related to the building of a verification test plan.

If you missed the event, as I did - or even if you were there - this is your lucky day, because herein you will find an improved version of that panel discussion. It's improved because:

A)You can read it at your leisure, hopefully with a good cup of coffee in hand;

B)There are several additional participants here who did not appear on the original DAC panel in July, but who have contributed substantive comments to the discussion below;

C)The book is always way better than the movie - more detailed, more complex, and with greater nuance.

So keeping these thoughts in mind, please read on. We're delving into a host of topics here, among them being formal verification, emulation and simulation, the division of labor between the design engineer and the verification engineer, and how to knit the whole darn thing together. Pretty interesting stuff!


Building a Verification Test Plan: The Book


Principle Characters:

Alan Hu - Department of Computer Science, The University of British Columbia

Andy Piziali - Verification Application Specialist, Cadence Design Systems

Craig Cochran - Vice President of Marketing, Jasper Design Automation

Catherine Ahlschlager - Hardware Manager, Formal Technologies Group, Sun

Doron Stein - Hardware & CAD Engineer, Cisco Systems

Harry Foster - Principle Engineer, Mentor Graphics

Janick Bergeron - Scientist, Verification Group, Synopsys

Rajeev Ranjan - CTO, Jasper Design Automation

Rich Faris - Vice President of Marketing & Business Development, Real Intent


Chapter I - Some Background

1) Please define formal verification.

Alan Hu - Formal verification means proving a property about a model of a system. "Proving" is in the sense of mathematical proof - the highest level of confidence of anything known to humanity. In other words, you have 100% coverage of all possible behaviors of your (model of your) system.

"Property" means you have to specify what you're proving, and this is the same problem whether you're working with formal or informal verification. If you don't know what you want (you don't specify to look for a particular case), you won't know to verify it. And "model" means you're always verifying something other than the actual product in the customer's hands. The model could be the layout, it could be gates, it could be a very abstract protocol, or an algorithm.

2) Please distinguish between an assertion and a property.

Alan Hu - I don't. Keep in mind that I'm speaking with the luxury of being an academic. In different contexts, some communities may draw a distinction.

For example, some people will say that "assertions" are embedded in the design, whereas "properties" are external to it. Other people will have other definitions. I don't think any usage has become the de facto standard, so if I'm talking to someone, I'll just keep listening until I figure out what distinction they're really trying to make.

3) At what point did formal verification become more than an "academic curiosity?"

Alan Hu - What we're seeing is a gradual process, and it's hard to cite a defining moment. Even thirty years ago, for certain niche markets, formal verification was already being used. Twenty years ago, companies like IBM had started doing formal equivalence verification in-house. Ten years ago, formal equivalence checking was taking over the RTL-to-gate market, and the big semiconductor and EDA companies (Intel, IBM, Cadence, Synopsys, etc.) and several start-ups were all ramping up on model checking.

Today, the model-checking (or property-checking) tools are gaining market traction, and RTL-to-gate equivalence checking is so completely owned by formal tools that most people don't think of it as formal verification anymore. Ten years from now, even more formal techniques will be mainstream parts of the design flow, but some formal verification problems will still be in the realm of academic research. It's important not to keep redefining formal verification to mean whatever we can't quite do yet.

4) Is it possible to verify a large SOC without using some form of formal verification?

Alan Hu - Sure. You can carefully hand-pick exceptionally good design and verification engineers, choose an extremely conservative (i.e., low performance) architecture and design that's "obviously correct," buy a ton of emulation boxes and server farms, simulate for a really, really long time, and do some extra spins of silicon until you get most of the bugs out.

The real question is whether it's cost-effective to do a large SOC without using some form of formal verification. And I'd have to say the answer is no. People vote with their wallets. Everyone these days is using formal for verifying RTL-to-gate equivalence, for example. People have decided that's the most cost-effective way to do that step.

For property checking, the value proposition is less clear. All of the people doing the most complex chips - the microprocessors and GPUs and very complex SOCs - are all either buying or developing in-house formal property checking tools. In some cases, they are developing extremely sophisticated formal methodologies, as well.

So, on the leading edge, the value proposition is definitely there. For the trailing-edge designs, though, people apparently can get by with older technology for a bit longer.


Chapter II - The Panel Discussion

1) What is a verification test plan (a spreadsheet, a GUI, a document?) and how does it differ from traditional verification strategies?

Harry Foster - Verification planning is not a thing - it is a critical process of design. Some might view this process as a means to an end (that is, a written document or verification feature checklist), but it is so much more than that. It is a fundamental component of the design process, and its analysis component often uncovers design and architectural bugs prior to implementation or application of any form of verification!

Janick Bergeron - A verification plan is a list of features of the design that need to be verified. A verification plan could come in many forms, such as a spreadsheet, a document in natural language, or it could simply reside in the engineer's head. The industry hasn't yet settled on the best approach to define a verification plan.

Doron Stein - A verification test plan should be a combination of a database (hence a dynamic infrastructure) with the ability to produce a "traditional" test plan in a document form or an HTML format. By establishing such a structure, we encapsulate the ability to reflect correct status with in the verification plan thus closing a bit the verification loop (plan, execute, evaluate your planing, execute, etc.).

Catherine Ahlschlager - Most of the test plans that I've seen are documents that describe the overall verification strategy, and features to be tested and how to test them. They are often translated into spreadsheets, so that coverage/tests can be written to monitor how the project is doing against the schedule. In addition, milestones are usually included to outline deliverables on each verification phase.

1 | 2 | 3 | 4 | 5  Next Page »

You can find the full EDACafe event calendar here.

To read more news, click here.

-- Peggy Aycinena, EDACafe.com Contributing Editor.

Review Article
  • October 09, 2008
    Reviewed by 'Simone'
    Lose the annoying transition pages and fix the links to the subsequent pages of the article please!
    Seems as though you guys have sold out to Cadence and they have hi-jacked your once wonderful site and weekly review.
    Please get well soon and keep me informed.
    Ken Simone
    Old and Grumpy EDA Guy

      Was this review helpful to you?   (Report this review as inappropriate)

For more discussions, follow this link …

ClioSoft at DAC

Featured Video
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Symposium on Counterfeit Parts and Materials 2018 at College Park Marriott Hotel & Conference Center MD - Jun 26 - 28, 2018
Concar Expo 2018 at Convention Hall II Sonnenallee 225 Berlin Germany - Jun 27 - 28, 2018
Nanotech 2019 at Tokyo Big Sight East Halls 4-6 & Conference Tower Tokyo Japan - Jun 30 - 1, 2018
INMMiC 2018 at university campus of Brive La Gaillarde France - Jul 5 - 6, 2018
ClioSoft at DAC
TrueCircuits: IoTPLL

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise