January 10, 2012
Blurring the line between EDA & Test
Please note that contributed articles, blog entries, and comments posted on EDACafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.
Designers working on subsystems and systems using information for LED, semiconductor, and package components use complex thermal analysis software to help accelerate the design of their products but the analysis, typically based on vendor datasheets, often provides insufficient results. Clear, accessible, and reliable data relating to thermal characteristics upstream and downstream is critical. Methods to achieve this have traditionally been awkward, manual and therefore error-prone – until now with Mentor Graphics T3Ster thermal characterization and interface to the FloTHERM thermal simulation software product.
Now the integration of Mentor’s T3Ster hardware measurement and FloTHERM software simulation provides a combined methodology of optimizing heat management in devices, sub-systems and full systems. Manufacturers are able to optimize their LED and IC package designs for effective heat dissipation. Once the device prototype is built, they can then characterize the device from a thermal perspective and build accurate models for use in FloTHERM thermal software simulations at both the sub-system and full system levels. Finally, systems integrators can further verify their heat management solutions with physical measurements using the T3ster hardware.
“As LEDs become more powerful, more attention should be paid to thermal management, which is essential to ensure stable LED performance and long lifetime. This is why OSRAM is devoting considerable attention to thermal design. T3Ster’s accuracy and repeatability enable us to verify our thermal designs and confirm the stability and reliability of our products,” stated
Dr. Thomas Zahner, quality manager, Osram Opto Semiconductors. “By testing in bulk we get increased statistical confidence in the measurement results. The structure functions built into the T3Ster software are extremely powerful for identifying different thermal attach issues during our extensive reliability testing.” (from “When Designing with Power LEDs, Consider Their Real Time Thermal Resistance,” by Andras Poppas, Mentor Graphics, Nov/Dec 2009 LED Professional Review.)
“To design our lighting systems, we needed reliable data regarding LED characteristics and simulation tools which deliver results quickly. We found that Mentor’s T3Ster and FloTHERM products were the best such tools available to us and we could use them in our project to verify our PearLight street lighting luminaires for proper heat management. Accuracy and speed in achieving the results was critical for our business,”
said András Szalai, CFO, HungaroLux.
JEDEC is the organization dedicated to microelectronics industry standards. The Mentor Graphics T3Ster advanced thermal characterization tester for semiconductor packages is the only commercially available product to fully implement the JEDEC JESD51-14 new measurement methodology standard for the junction-to-case thermal resistance of power semiconductor devices. The T3Ster test methodology ensures higher accuracy and repeatability compared to classical steady-state measurements based on older standards. Mentor’s FloTHERM product allows engineers to implement virtual prototypes using advanced CFD techniques to simulate airflow, temperature and heat
transfer in electronic systems. By using accurate thermal analysis, engineers can evaluate and test designs automatically before physical prototypes are built. When combined with the T3Ster product, engineers using the FloTHERM tool will benefit from both accurate thermal simulation models derived from real measurements and thermal package characterization testing.
Package characterization measurements provide an insight into the package structure with thermal resistances and thermal capacitances. Simulation software provides the engineer with information on specific sections of the design that correspond to the measured structure. Thermal interface materials are quite difficult to model since their conductivity and thickness cannot be determined with high accuracy. Thus, thermal package measurements produced by the T3Ster product, based on the resistance of these materials, can be used later for accurate model creation in FloTHERM software. This seamless process provides fast, easy and accurate model creation;
identifies product design defects; and enables manufacturing quality checking. The combined T3Ster tester and FloTHERM analysis software solution is compatible with other Mentor Graphics products to provide comprehensive thermal simulation for optimum system reliability, from IC package and LED, to PCB, and to full system development.
“Mentor’s best-in-class thermal simulation and measurement of semiconductor packages and LEDs provide tremendous advantages for customers faced with thermal challenges,” said
Dr. Erich Buergel, general manager of Mentor Graphics Mechanical Analysis Division. “The ease in creating accurate thermal models based on reliable thermal measurements helps users quickly to identify design problems and to create design alternatives which improve product quality, reliability, and increased profitability.”
The Mentor Graphics T3Ster and FloTHERM solution for efficient thermal package characterization is available today.
End of news release.
Long time readers of the EDA WEEKLY will recall that the December 07, 2009 issue introduced Dr. Erich Buergel of the
Mechanical Analysis Division (MAD) of Mentor Graphics in an article entitled, "MAD Progress."
Joining MAD only a few months before that article was posted, Erich had become the new
General Manager of the MGC Mechanical Analysis Division
, formed after the acquisition of
Flomerics plc by MGC in August 2008.
Dr. Buergel (pictured above) continues to report to
Henry Potts, VP & GM of the MGC Systems Design Division (SDD). Mr. Potts, headquartered in Longmont, CO, was featured in the July 25, 2011 EDA WEEKLY, entitled, "Back to the Future":
Not mentioned in either previous article was the existence of a small group in Budapest, Hungary that had been acquired by Flomerics shortly before Flomerics was acquired by MGC.
It turns out that this latter Budapest group is responsible for the development of the products for Thermal and Optical Testing discussed in the news release above:
T3Ster® – thermal testing of electronic parts and systems...
...is combined with the more recently developed
...to create the
T3Ster/TERALED® system for combined thermal and optical testing of LEDs:
So in the MGC News Release of December 12, 2011, we have found our fourth example of a system that blurs the line between EDA and Test, an example of a system already in production and use by several MGC customers!
Great thanks to MGC’s Suzanne Graham for arranging the MGC briefing on its new products, to Kim Coxe for e-mailing collaterals, and especially to John Isaac for braving the snows of Longmont, CO to conduct the Internet briefing. And a nod of congratulations to MGC for the “management moxie” to market these EDA/Test combination products.
Graphics Acquires the Flowmaster Group to Provide a Unique Combination of CFD Capabilities
On January 9, 2012
Mentor Graphics announced that it had acquired the
Flowmaster Group, a global leader in 1D Computational Fluid Dynamics (CFD) simulation software for system design. 1D CFD solutions allow for very rapid engineering design of complex fluid flow network systems like water-cooled electronic racks, automotive vehicle thermal management, and aerospace fuel systems.
A News Release will be available soon at:
You can find the full EDACafe event calendar here.
To read more news, click here.
-- Russ Henke, EDACafe.com Contributing Editor.
Be the first to review this article