VMETRO Introduces 1.5 & 3 GSPS ADC XMC Modules

HOUSTON—(BUSINESS WIRE)—April 25, 2007— VMETRO has announced two high-speed analog input XMC modules with the latest generation Xilinx(R) Virtex(TM)-5 FPGA. The AD3000 is a single channel 3GSPS ADC, and the AD1500 is a dual channel 1.5GSPS ADC. The modules' analog input utilizes either a National Semiconductor ADC083000 or ADC081500 8-bit converter. Both designs share a common FPGA back-end with either a Virtex-5 SX95T or LX110T FPGA and are directly connected to the analog input. This combination of high-speed analog input and high-performance FPGA processing is ideal for demanding real-time applications such as Electronic Counter Measures (ECM), Radar and Telecommunications.

"By leveraging the performance, power and integration benefits of our 65-nm Virtex-5 FPGAs, VMETRO has delivered the industry's first single-board GSPS ADC XMC modules, providing the required processing performance while meeting customer power budgets," said Per Holmberg, director of Programmable Digital Solutions Marketing at Xilinx. "We have been delivering the benefits of 65-nm FPGAs since May 2006. As one of our early access customers, VMETRO now has a leading edge in their market place."

"The AD3000 and AD1500 are not just analog input cards, they both include a fully user programmable FPGA processing block on an XMC module," says Thomas Nygaard, Chief Technology Officer at VMETRO. "These boards are changing the rules of the game; in the past, each design was only possible using two separate boards, or one large board because of the power and complexity involved, but not anymore."

An LVPECL trigger input, an LVPECL output, an LVTTL output and the sample clock input are provided on the front panel. This connectivity allows the AD3000 and AD1500 to be operated in a range of modes, including multi-board synchronous sampling.

The FPGA is connected to two 8Mbyte memory banks of QDRII SRAM capable of accepting the incoming data at full speed from the ADC, and two 128Mbyte banks of DDR2 SDRAM. Although the use of these memories is defined by the application, they can be used to help maximize the FPGA's DSP processing ability and provide large data buffers. FPGA reconfiguration is stored in local FLASH memory. The PCI-X interface can be used to send commands to the FPGA to reconfigure itself from a file stored in this FLASH. Alternatively, a JTAG header is provided for code development under the ChipScope(TM) Pro development tool chain.

Off board data links are provided through either PCI-X or PCI via the PMC connectors or high-speed, multi-Gbps Virtex-5 RocketIO(TM) transceivers using the XMC connectors. There are sixteen full-duplex low-power serial transceivers arranged across two XMC connectors. Each of the sixteen transceivers can operate at up to 3.2 Gbps. A PCI Express(R) end-point controller is available within the FPGA supporting x1, x2, x4 or x8 PCI Express operation. This optional built-in protocol support frees up FPGA resources and simplifies system design.

Host software support includes Windows, VxWorks and Linux, including drivers for high-speed DMA access between the XMC and host CPU, FPGA reconfiguration and diagnostics. Example software and firmware are provided for using the National Semiconductor ADC083000 and ADC081500 with the Virtex-5 FPGA as well as the external memory.

A companion product, the XCLK1 Clock Generator PMC/XMC card, can be used to generate 1 to 4 low skew and minimal jitter clock signals to the A/D boards.

Both the AD3000 and the AD1500 will be available in XMC and PMC form factors, for air and conduction-cooled environments. Pricing starts at $13,995. The AD3000 is expected to ship in Q3 2007. The AD1500 is expected to ship in Q3 2007.

Xilinx is a registered trademark of Xilinx, Inc., San Jose, California in the United States and may be registered in other countries.

Virtex, ChipScope and RocketIO are trademarks of Xilinx, Inc. San Jose, California in the United States and other countries.

PCI Express is a registered trademark of the PCI SIG.

About VMETRO

VMETRO (OSE: VME) provide integrators of high-end embedded computer systems with products and services from development through deployment, with the highest levels of performance, innovation and reliability. Main product areas include 1) Embedded Computing - high-performance I/O and Digital Signal Processing boards and systems based on FPGAs and PowerPCs, 2) Data Recording and Storage - high-performance long endurance Recording/Playback systems and Rugged Storage solutions, and 3) Bus and Protocol Analyzers - advanced tools used to debug, optimize, validate and test computer based systems. All products are based on open standards like VME/VXS and PCI/cPCI/PMC/XMC, with strong focus on high-speed serial interconnects such as Fibre Channel, Serial FPDP, Aurora and PCI Express.

For more information, please visit www.vmetro.com.

Contact:

VMETRO
In the US:
Marketing Manager
Nicole Renfro, 281-584-0728 ext. 27
Fax: 281-584-9034
Email Contact
or
In Europe:
Group Marketing Manager
Stein-Erik Maurice, +47 22 10 60 90
Fax: +47 22 10 62 02
Email Contact
or
In Asia:
APAC Regional Manager
Mr. Valliappan, +65 6238 6010
Fax +65 6238 6020
Email Contact


Rating:


Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy