Atmel Introduces Advanced Stand-alone AVR ATmega128-based 125-kHz RFID Evaluation Kit

HEILBRONN, Germany, March 28 /PRNewswire-FirstCall/ -- Atmel(R) (NASDAQ: ATML) announced today the availability of the ATA2270-EK1125-kHz RFID demo kit. This new kit enables the evaluation and prototyping of Atmel's wide portfolio of LF IDIC(R)s, which are used in a broad range of RFID applications including access control, industrial automation, loyalty cards, anti-counterfeiting, and animal identification. This stand-alone kit is ideal for the evaluation and customization of RFID solutions without requiring advanced knowledge of RF engineering.

Atmel's ATA2270-EK1 provides a completely self-contained means to begin using RFID systems. The kit includes several IDIC transponder samples such as the ATA5567 and ATA5570 read/write ISO card devices for contactless identification, the TK5530 read-only transponder, the ATA5567 coin tag, and other read/write IDIC micromodules. A reader unit using Atmel's read/write base station IC, the U2270B, in conjunction with Atmel's ATmega128 AVR(R) Flash microcontroller, an antenna, and a power supply with international adapters complete the kit. An on-board joystick, LCD, and control buttons enable easy user interaction with the RFID system without requiring an additional connected PC.

The ATA2270-EK1 offers an easy way to test the capabilities and characteristics of Atmel's LF RFID tags and thus allows engineers effective identification of the most suitable RFID solution. The kit supports both read-only and read-write IDICs, including the e5530/TK5530, T5551/TK5551, ATA5567 (T5557), ATA5570, ATA5577, and ATA5558 from Atmel. The convenient LCD displays the data content of the IDICs, and routines included in the AVR software can be used to test the features of Atmel's chips. This kit is also suitable for evaluation of animal tagging and tracking applications. By exchanging the antenna tuning components, the kit can be tuned to 134.2 kHz, which is required for animal tagging analysis. A special routine included in the AVR software enables data to be read and written in accordance with ISO standards 11784 and 11785. The ATA2270-EK1 will also support Atmel's next generation of IDIC products.

Thanks to the inclusion of unrestricted source code and Gerber schematics, the ATA2270-EK1 provides a unique prototyping environment for low-cost turnkey solutions, allowing users to develop, implement, and test system-level designs. The ATA2270-EK1 is supported by all the standard AVR development tools such as AVR Studio(R), STK(R)500, JTAGICE mkII, etc.

Availability and Pricing

Samples of the new LF IDIC evaluation kit ATA2270-EK1 are available now. Pricing starts at US $299 per unit.

    ID = Identification
    IDIC(R) = Identification ICs (registered trademark of Atmel)
    LCD = Liquid Crystal Display
    LF = Low Frequency
    PC = Personal Computer
    RFID = Radio Frequency IDentification

    About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You Are(R).

NOTE: Atmel(R), logo and combinations thereof, IDIC(R), AVR(R), AVR Studio(R), STK(R), Everywhere You Are(R) and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.


Information on the ATA2270-EK1 demo kit may be retrieved at Identification&tool_id=3956

If you are interested in Atmel's complete RFID product scope, please visit:

Press Contacts

Dr. Susanne van Clewe, Marcom Manager Communications and Automotive Products

    Phone: +49 7131 67-2081, Email:  
Email Contact

    Helen Perlegos, Public Relations - USA and Asia Pacific Rim
    Phone: +1 408 487-2963, Email: 
Email Contact

    Veronique Sablereau, Corporate Communications Manager - Europe

Phone: +33 1 30 60 70 68, Fax: +49 7131 67-2423, Email: Email Contact

Web site:

Review Article Be the first to review this article

Aldec Simulator Evaluate Now

Featured Video
RF IC Design Engineering Manager for Intel at Santa Clara, CA
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
ASIC Design Engineer for Infinera Corp at Sunnyvale, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Acoustic Systems Test Engineer for Cirrus Logic, Inc. at Austin, TX
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
Upcoming Events
IC Open Innovation Panel During REUSE 2017 at Santa Clara Convention Center 5001 Great America Parkway Santa Clara CA - Dec 14, 2017
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
CST: Webinar series

Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise