OmniVision Demonstrates First Low-Cost, Digital Wireless Security Solution Using Video Over 805.15.4/Zigbee Networks

LAS VEGAS, March 28 /PRNewswire-FirstCall/ -- OmniVision Technologies, Inc. (NASDAQ: OVTI), a leading independent supplier of CMOS CameraChip(TM) image sensors for high-volume applications, announced today at the International Security Conference (ISC) West in Las Vegas, Nevada, that it is demonstrating a reference design that provides a digital security camera solution for MPEG 4 video systems using the company's OV7720 CameraChip(TM) sensor. The reference design, called Home SecuCam, is the first of its kind to use video over the 805.15.4/Zigbee wireless network, a capability that OmniVision believes offers its customers a distinct competitive advantage.

Home SecuCam serves as a blueprint for integrated security monitoring via a variety of protocols, including wireless and mobile networks, enabling cost- effective audio/video home security that is easily adaptable by customers to meet their individual requirements. OmniVision's solution requires no expert knowledge for installation and does not require an IP router. To meet the requirements of the security market, Home SecuCam operates at very low power, enabling it to remain in standby mode for months on battery power. With up to 16 channels, it can support multiple cameras to cover multiple areas and can be daisy chained to have longer distance coverage over a greater area.

The prototype of the Home SecuCam reference design being demonstrated at ISC West (OmniVision booth # 7087) uses chipset solutions that provide MPEG4 compression and RF 2.4G wireless networking. The Home SecuCam solution is also suitable for interfacing to a modem, Ethernet connection or a GSM/3G mobile network for remote monitoring.

About OmniVision

OmniVision Technologies designs and markets high-performance semiconductor image sensors. Its OmniPixel and CameraChip products are highly integrated single-chip CMOS image sensors for mass-market consumer and commercial applications such as mobile phones, digital still cameras, security and surveillance systems, interactive video games, PCs and automotive imaging systems. Additional information is available at

Safe-Harbor Language

Certain statements in this press release, including statements regarding the performance, achievements and capabilities of the Home SecuCam, are forward-looking statements that are subject to risks and uncertainties. These risks and uncertainties, which could cause the forward-looking statements and OmniVision's results to differ materially, include, without limitation: potential errors, design flaws or other problems with the Home SecuCam reference design or the OV7720; risks associated with building customer acceptance of and demand for the Home SecuCam reference design; the rapid changes in technical requirements for security and surveillance products; competitive risks; as well as other risks detailed from time to time in OmniVision's Securities and Exchange Commission filings and reports, including, but not limited to, OmniVision's most recent annual report filed on Form 10-K. OmniVision expressly disclaims any obligation to update information contained in any forward-looking statement whether as a result of new information, future events or otherwise.

OmniVision(R) and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc., CameraChip(TM) is a trademark of OmniVision Technologies, Inc.

Web site:

Review Article Be the first to review this article


Featured Video
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy