Zarlink's 4x2.5 Gbps (IB SDR) QSFP module, now available for sampling, will be demonstrated in a QLogic InfiniBand host-channel adaptor. By combining four ultra-high capacity, independent fiber transmit and receive channels into one integrated module, Zarlink's QSFP product provides InfiniBand equipment manufacturers with edge and board density savings of greater than 60 percent while slashing power consumption to 250 mW per transceiver channel. The QSFP module also integrates comprehensive digital diagnostic monitoring.
Zarlink is developing a complete QSFP product family that will extend these performance and design benefits to other applications, such as the Gigabit Ethernet and storage markets.
"The InfiniBand QSFP transceiver responds to the market need for a reliable, high-density, 1 W power dissipation, hot-pluggable, scalable data-rate, multi-lane networking and data center optical link," said Dr. Marco Ghisoni, QSFP product manager, Zarlink Optical Solutions. "Building on Zarlink's market-proven expertise in developing fully-qualified multi-channel parallel optical modules, VCSELs and optical IC technologies, and employing multimode fiber ribbon, the InfiniBand QSFP family will play an important role in high-density bandwidth-intensive applications, up to 40 Gbps."
"The growing demand for bandwidth, longer link distances for optimum data center configuration and InfiniBand port scalability requires new PHY layer media interconnect solutions," said Lloyd Dickman, chief technical officer, System Interconnect Group, QLogic. "Zarlink's dense pluggable optics solution, like its QSFP module demonstrated with our high-performance InfiniBand adapter, is an excellent example and the first of many new optical products that enrich the flexibility and scalability of InfiniBand deployment."
QSFP MSA (multi sourcing agreement) support
Zarlink's QSFP module follows the mechanical form-factor, electrical pin-out and diagnostic management interface specifications outlined in the QSFP MSA rev0.9x. Zarlink is one of 21 member companies involved in defining the QSFP MSA.
"Zarlink has been one of the main contributors to the QSFP MSA, so it's no surprise that they were the first to release a module that supports the specification," said Scott Kipp, chair of the QSFP MSA. "At 5 Gbps on each of the eight fibers, the Zarlink module offers the densest, pluggable transceiver bandwidth on the market."
Availability and roadmap
Zarlink is now sampling 4x2.5 Gbps and 4x5 Gbps InfiniBand QSFPs, supported by evaluation boards and a graphical user diagnostic interface. Pre-production parts will be available in early 2007, with full production parts released by mid-2007. Zarlink's complete range of QSFP modules is planned for production over the next 12 months.
For more information on Zarlink's QSFP product family, contact Marco Ghisoni (firstname.lastname@example.org) and visit http://www.zarlink.com/opticalsolutions/QSFP-Nov06.htm. For more on Zarlink's optical solutions visit http://www.zarlink.com/opticalsolutions/.
About Zarlink Semiconductor
For over 30 years, Zarlink Semiconductor has delivered semiconductor solutions that drive the capabilities of voice, enterprise, broadband and wireless communications. The Company's success is built on its technology strengths including voice and data networks, optoelectronics and ultra low-power communications. For more information, visit www.zarlink.com.
Shareholders and other individuals wishing to receive, free of charge, copies of the reports filed with the U.S. Securities and Exchange Commission and Regulatory Authorities, should visit the Company's web site at www.zarlink.com or contact Investor Relations.
Certain statements in this press release constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance, or achievements expressed or implied by such forward-looking statements. Such risks, uncertainties and assumptions include, among others, the following: rapid technological developments and changes; our ability to continue to operate profitably and generate positive cash flows in the future; our dependence on our foundry suppliers and third-party subcontractors; increasing price and product competition; our exposure to product warranty claims resulting from product defects or failures; and other factors referenced in our Annual Report on Form 20-F. Investors are encouraged to consider the risks detailed in this filing.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink