Cypress Enables Instant Programming of Popular Frequencies with Launch of Clock Chip and Self-Serve Programming Kit

New InstaClock(TM) Programmable Clock Generators Address Numerous Applications and Minimize Inventory Requirements

SAN JOSE, Calif.—(BUSINESS WIRE)—July 18, 2006— Cypress Semiconductor Corp. (NYSE: CY), a world leader in timing technology solutions, today introduced a clock chip and self-service programming kit that together enable programming of commonly used frequencies. Designers can use the new InstaClock(TM) Programmable Clock Generator kit to program InstaClock samples with any configuration in a set of defined frequencies in less than a minute, eliminating the lead-time of waiting for custom-programmed parts or for a mask change. Another key customer benefit is that the kit reduces the number of components necessary for multiple frequencies by providing the same footprint for a wide range of configurations and applications. The reprogrammable InstaClock chips feature EMI reduction and VCXO capabilities, and support frequencies used in Ethernet, PCI, USB, HDTV, and audio applications.

The CY36800 programming kit provides access to the most commonly used clock frequencies with a simple software selection and supplies a standard part number that can be ordered from authorized distributors. Additional configurations and frequencies are available as online downloads. The kit allows for instant programming of CY22800 InstaClock samples, meaning the same device can be used to address many common applications for programmable clocks in end-user systems and many crystal- or oscillator-generated frequencies in those systems. By allowing for self-serve programming, the kit enables engineers to streamline the process of tuning clocks and to reduce the development cycle as clock requirements and board designs change during prototype development.

"Cypress's new InstaClock Programmable Clock Generator delivers a significant reduction in lead time for custom programmable clocks, giving designers the ability to simply configure samples in a matter of minutes if their board design changes, instead of waiting days for a supplier to do so," said Scott Harmel, vice president for Cypress's General Purpose Clocks business unit. "The reduction in inventory provided by InstaClock is equally powerful: Instead of ordering five different parts for five different sockets, customers can order a single part number to support different configurations, and perform only one device qualification."

The CY36800 InstaClock Programmable Clock Generator kit contains:

-- Five samples of the CY22800 general purpose InstaClock

-- A programmer board with USB connector and a USB cable

-- A CD-ROM containing software and ordering information.

Cypress's CY22800 general purpose InstaClock features:

-- General Purpose Clock Synthesizer -- Microprocessor, USB, Ethernet, PCI, HDTV, Digital Audio, and other standard frequencies

-- EMI Reduction -- Programmable spread spectrum from +/-0.25% to +/-2.0% and Lexmark Profile for maximum EMI reduction

-- VCXO -- Pull-range of +/-150 ppm provides flexible crystal selection.

Pricing and Availability

The CY36800 InstaClock Programmable Clock Generator Kit is available free of charge from authorized Cypress distributors or for $19.95 from the Cypress Online Store. For more information on the kit, to order, or to download a high-resolution image of the kit, visit www.cypress.com/InstaClock. The CY22800 general purpose InstaClock is available in an 8-pin SOIC package and is currently in production.

About Cypress

Cypress solutions perform: consumer, computation, data communications, automotive, industrial, and solar. Leveraging proprietary silicon processes, Cypress's product portfolio includes a broad selection of wired and wireless USB devices, CMOS image sensors, timing solutions, specialty memories, high-bandwidth synchronous and micropower memory products, optical solutions and reconfigurable mixed-signal arrays. Cypress trades on the NYSE under the ticker symbol CY. Visit us at www.cypress.com.

Cypress and the Cypress logo are registered trademarks and InstaClock is a trademark of Cypress Semiconductor Corporation. All other trademarks are the property of their respective owners.



Contact:
Cypress PR
Don Parkman, 408-943-4885

Email Contact

Rating:


Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs


Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
Verific: SystemVerilog & VHDL Parsers
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy