D2 Technologies Launches ARM VoIP Solution on TI OMAP Platforms; Flexible Virtual Design for Voice Processes

SANTA BARBARA, Calif.—(BUSINESS WIRE)—May 16, 2006— D2 Technologies announces today that its vPort(TM) VoIP software has been implemented on the ARM926e RISC processor embedded within the Texas Instruments OMAP 1710 and OMAP 850 SoC (system on a chip). This allows fully-featured VoIP applications to be offered with or without the need for DSP hardware, resulting in a flexible virtual DSP design that can address a wide variety of applications.

D2's integrated software solution, called vPort, includes audio drivers, voice processing functions (like compression, echo cancellation, Caller ID, DTMF, packet loss concealment, etc.), RTP packetization, Jitter Buffer, SIP signaling and application layer. For dual mode wireless applications on the OMAP850, where the DSP is committed to other baseband signal processing functions, vPORT can execute entirely on the ARM CPU. In other applications where the ARM processor is needed for high level functions, the voice signal processing subsystem of vPORT can be executed on the attached DSP on the OMAP1710. Introduced three years ago, D2's vPort software is deployed in residential end-point products, and is designed for CPE end-point products such as wired/wireless Voice-enabled Terminal Adapters, routers and gateways, as well as VoIP phones and handsets.

ARM Processors Make Efficient Use of Silicon

"ARM processors make efficient use of silicon and memory, which allows semiconductor companies to make economical semiconductor devices with the low power consumption required of wireless or portable devices. This, coupled with efficient signal processing instructions useful for voice algorithms make the ARM an ideal platform for running D2's VoIP software," according to D2 President, David Wong.

The Texas Instruments OMAP 1710 is an effective platform for use in handsets for single-mode WiFi applications or dual-mode WiFi/cellular applications. Its unique multi-engine design provides software/hardware accelerators for improved multimedia and graphics performance. Plus the 1710 has integrated hardware and software security features and ultra-low standby power consumption.

D2 is a Member of the ARM Connected Community

D2 has also joined the ARM Connected Community, which is a global network of companies aligned to provide a complete solution for products based on the ARM architecture. ARM offers a variety of resources to Community members, including promotional programs and peer-networking opportunities that enable a variety of ARM Partners to come together to provide end-to-end customer solutions.

About D2 Technologies

D2 Technologies, Inc. is the world's leader in softDSP-based software solutions for the rapidly growing VoIP market. Its software spans both enterprise and consumer devices, such as gateways and WiFi handsets. Since the company's original founding in 1993, D2's VoIP solutions have been widely deployed in thousands of systems that process billions of minutes of phone calls every month. D2 licenses its software to systems manufacturers worldwide who develop a wide variety of consumer products. The company's software runs on the platforms of several major semiconductor vendors.

The company's headquarters is located at 104 W. Anapamu St., Santa Barbara, CA 93101. Additional information about D2 is available at www.d2tech.com.

D2's Asia sales/support office is located at Room 6, 5F, No.120, Sect 2, Gongdao 5th Road, Hsinchu City, Taiwan. Tel: +886-3-5715339.

ARM is a registered trademark of ARM Limited. ARM926EJ-S is a trademark of ARM Limited. "ARM" is used to represent ARM Holdings plc; its operating company ARM Limited; and the regional subsidiaries ARM INC.; ARM KK; ARM Korea Ltd.; ARM Taiwan; ARM France SAS; ARM Consulting (Shanghai) Co. Ltd.; ARM Belgium N.V.; AXYS Design Automation Inc.; AXYS GmbH; ARM Embedded Solutions Pvt. Ltd.; and ARM Physical IP, Inc.

OMAP is a trademark of Texas Instruments, Inc.

All other brands or product names are the property of their respective holders.



Contact:
D2 Technologies, Inc.
Larry Pfeifer, 805-564-3424 x-350

Email Contact
or
KPR, Inc.
David Kaye, 818-368-8212

Email Contact
or
Barbara Evans, 818-368-8212

Email Contact



Review Article Be the first to review this article
CST Webinar Series

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy