Avago Technologies Ships 200 Millionth FBAR Filter for Mobile Phones, Data Cards; Industry's Smallest FBAR Filters Now Ship at More Than 15 Million/Month

SAN JOSE, Calif.—(BUSINESS WIRE)—Dec. 22, 2005— Avago Technologies today announced that it has shipped its 200 millionth FBAR (film bulk acoustic resonator) filter. Strong demand by the world's top handset manufacturers has driven Avago to increase its shipments to more than 15 million per month. FBAR filters are used in mobile phones, data cards and other wireless products.

"Reaching the 200-million shipping milestone is a momentous occasion for us," said Bryan Ingram, vice president and general manager of Avago Technologies' Wireless Semiconductor Division. "Our FBAR filters have become the de-facto industry standard for handsets used in the U.S. PCS market. FBAR has also enabled a robust front-end module business through the integration of semiconductor-based FBAR duplexers with E-pHEMT power amplifiers. As manufacturers continue to add features such as GPS, cameras and Bluetooth, the requirement for smaller radio front-end circuits is growing. We've shipped more than one million duplexer/PA front-end modules."

The current-generation filter products shipping in high volume are the Avago ACPF-7003 FBAR full-band transmit filter, the ACMD-7401 FBAR duplexer and the Avago AFEM-7731 front-end module (FEM). Smaller, next-generation FBAR duplexers for U.S. PCS and UMTS band I (1.3 mm high with 3.8 mm x 3.8 mm footprint) are also now shipping in volume.

Avago's FBAR duplexers are the industry's smallest form factor in volume production. They are built with Avago's innovative Microcap bonded-wafer, chip-scale packaging. Duplexers play a critical role in both narrow band CDMA (code division multiple access) and 3G handsets and data cards by separating incoming from outgoing communications to allow for simultaneous, two-way voice or data transmission.

Avago's FEMs are fully matched CDMA 1900-MHz products, integrating Avago's highly efficient E-pHEMT (enhancement-mode pseudomorphic high electron mobility transistor) power amplifiers with a miniature FBAR duplexer and all matching circuitry into a compact chip-on-board module. Compared to designs using separate power amplifiers and duplexers, the Avago FEM features higher effective power-added efficiency for longer talk time, and high isolation and low loss in the receive band for high sensitivity.

Further information about Avago's FBAR products and technology is available at www.avagotech.com/rf.

Avago's Mobile Appliance Solutions

Avago is a leading supplier of semiconductor solutions for today's highly integrated, feature-rich mobile handsets. In addition to FBAR filters and E-pHEMT and CoolPAM power amplifiers that save battery life and help shrink handset size, Avago provides CMOS image sensors that enable camera phones and notebook/mobile cams, infrared transceivers for transmitting data, surface-mount LEDs that provide backlighting styling options, proximity sensors that automate the speakerphone, and ambient light photo sensors that save battery life by controlling backlighting. No other component vendor offers all of these solutions for mobile appliances. More information about Avago's family of mobile appliance semiconductor solutions is available at www.avagotech.com/mobile.

About Avago Technologies

Avago Technologies is the world's largest privately held semiconductor company, with 6,500 employees and net revenue of $1.8 billion in fiscal 2005. Avago provides an extensive range of analog, mixed-signal and optoelectronic components and subsystems to more than 40,000 customers worldwide. The company serves three primary product categories comprising optoelectronics, RF/microwave components and enterprise ASICs, and is recognized for providing innovative, high-quality products along with strong customer service and the industry's best on-time delivery. Avago's heritage of technical innovation dates back 40 years to its Agilent/Hewlett-Packard roots. Information about Avago is available on the Web at www.avagotech.com.

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries.

NOTE TO EDITORS: Please direct reader inquiries to Avago Technologies at 800-235-0312, or e-mail us at support@avagotech.com.

Avago Technologies
Mark Alden, 408-435-6905

Email Contact
Weber Shandwick
Elvia Soltero, 408-530-8400 ext. 2226

Email Contact


Review Article Be the first to review this article

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Technical Support Engineer for EDA Careers at Freemont, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy