World's First, True High-Definition Video Filter Amplifiers From Maxim

SUNNYVALE, Calif.—(BUSINESS WIRE)—Dec. 6, 2005— Maxim Integrated Products (NASDAQ: MXIM) introduces the MAX9500/MAX9501, the world's first true high-definition video filter amplifiers and the latest addition the Company's portfolio of video filters and amplifiers. These are the only true high-definition (HD) filter amplifiers because they have greater than 40dB attenuation at 44.25MHz, which is a requirement for all HD signals sampled at 74.25MHz. Perfect for filtering and buffering HD video signals, the MAX9500/MAX9501 can be used as a reconstruction filter for HD video outputs of set-top boxes, DVD-recorders, DVD players, and satellite/cable receivers. The devices can also be used as an anti-aliasing filter for analog inputs of high-definition televisions (HDTV).

Unique Filter Amplifier Capabilities

The MAX9500/MAX9501 HD filter amplifiers have three key benefits.

1. Attenuate Undesired Aliases Starting at 44.25MHz

2. Drive Two Loads from a Single Set of Outputs

3. Available in Both Single-Supply and Dual-Supply Versions

1. Attenuate Undesired Aliases Starting at 44.25MHz

Most MPEG decoders in set-top boxes, DVD players, and AV receivers reconstruct HD video at 74.25MHz. Because, however, HD video signals have a 30MHz bandwidth, there will be a significant alias beginning at 44.25MHz. Therefore, customers need a filter that will pass the baseband video up to 30MHz, but fully attenuate the alias beginning at 44.25MHz. Existing HD filters cannot deliver this needed 30MHz, but instead provide only 15dB attenuation at 44.25MHz (see Figure 1), which allows the unwanted aliases to degrade the video quality.

The MAX9500/MAX9501 provide a 30MHz passband and 50dB attenuation at 44.25MHz to completely suppress aliases for optimal video quality.

2. Drive Two Loads from a Single Set of Outputs

The MAX9500/MAX9501 can drive two loads simultaneously for set-top box customers that have two sets of HD component (Y/Pr/Pb) outputs. Typical ICs only drive one set of outputs which forces customers with two sets of outputs, to TV and recorder for example, to purchase two sets of drivers. The MAX9500/MAX9501 allow customers to drive both loads with the same driver without any degradation of performance. This capability will save both the cost and added space of the additional driver circuitry.

3. Available in Both Single-Supply and Dual-Supply Versions

The MAX9500 operates with a single +5V supply for customers that do not have negative a supply rail in their systems. These customers can choose to AC-couple or DC-couple the outputs with a positive DC bias for a very simple solution.

The MAX9501 operates with dual +/-5V supplies. This is ideal for customers who already have +/- supplies in their system and do not want to AC-couple the outputs. Most competitors have only single-supply amplifiers so their customers must use a large output capacitor to center the signal around ground. This large coupling capacitor is both expensive and can degrade video quality. Because the MAX9501 operates off +/-5V, the video signal can be centered around ground without any capacitive coupling.

The MAX9500/MAX9501 come in compact 5mm x 6mm, 16-pin QSOP and 16-pin SO packages. Lead-free packaging is also available. Prices start at $1.05 (1000-up, FOB USA).

Maxim Integrated Products is a leading international supplier of quality analog and mixed-signal products for applications that require real world signal processing. For more information, contact Maxim at 120 San Gabriel Dr., Sunnyvale, CA 94086. Telephone: 408-737-7600 or our URL:

For more information on the MAX9500/1, please visit:



DATA SHEET: A data sheet for this product is available on the web.

GRAPHIC: The graphic for this product is available on the web in three formats:

PREVIEW image (smaller image to view in Navigator or Explorer):

JPEG (300 dpi, high quality, RGB color):

TIFF (300 dpi uncompressed CMYK TIF, in a .ZIP archive(1)):

((1) Use Winzip, StuffIt Expander or similar de-archive utility to access the .ZIP file)

Maxim Integrated Products  
Brian Gannon, 408-737-7600 ext. 3457 (Editors)
Customer Service, 800-998-8800 (Readers)

Review Article Be the first to review this article

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy