Altera & Commsonic Plan First Complete Multi-Channel FPGA-Based Universal Cable Modulator

Commsonic Broadcast Solutions Optimized for Altera's Stratix II and Cyclone II FPGAs to Be Demonstrated at IBC2005

HIGH WYCOMBE, England, Sept. 6 /PRNewswire-FirstCall/ -- Altera Corporation (NASDAQ: ALTR) and Commsonic Limited today announced a partnership to deliver the industry's first multi-channel single-chip FPGA solution, integrating the entire forward error correction (FEC) and modulation chain for digital broadcast over cable. The solution is fully compatible with the ITU-T J.83 Annex A, B & C standards adopted in Japan and North America, and the European Digital Video Broadcast -- Cable (DVB-C) standard. The solution will enable broadcast OEMs to deliver highly cost-effective equipment that targets intelligent video networks for "on-the-fly" reconfiguration of bandwidth-on-demand, resulting in networks with the highest performance and flexibility at the lowest possible cost.

The two companies also plan to develop professional modulators/demodulators for the DVB satellite version 2 (DVB-S2) and DVB satellite (DVB-S) standards as well as other cable, terrestrial, and satellite applications before the end of the year.

"The innovative DSP and RAM architectures in Altera's Stratix(R) II and Cyclone(TM) II FPGAs are very well suited to our technology because they consistently deliver a higher symbol rate per gate than is possible with other comparable platforms," said Commsonic director Paul Rudkin. "For example, we believe that Stratix II FPGAs may be the only cost-effective route to achieve the 300-Mbps throughput target we have set for our FPGA DVB-S2 demodulator."

Commsonic has already developed single-channel modulators for DVB-C and the COFDM-based DVB terrestrial (DVB-T) standards that are optimized for Stratix II and Cyclone II FPGAs. Altera will demonstrate the Commsonic solutions during this year's International Broadcast Convention (IBC2005) in Amsterdam at booth number 10.420 beginning Sept. 8.

"Many leading manufacturers have realized the advantages of Altera's(R) broadcast solutions and products and are now relying on Altera-based platforms to create and deploy flexible, future-proof and cost-effective products for the broadcast industry," said Todd Scott, senior director of Altera's digital consumer and broadcast business unit. "Commsonic's highly integrated cable modulation family is providing another major step forward in broadcast equipment size reduction."

To learn more about Altera's broadcast solutions at IBC2005, visit ( www.altera.com/education/events/europe/evt-ibc-2005.html ).

To see how customers have used Altera products in broadcast applications, visit ( www.altera.com/broadcastsuccess ).

About Commsonic

Commsonic provides technology, IP and specialist design services in the area of broadband communications. The CMS0024 Multi-channel Cable Modulator is the latest core in the company's portfolio of broadcast physical-layer intellectual property (IP), which spans single-carrier (QAM) and multi-carrier (COFDM) modem technology and codecs for forward error correction.

About Altera

Altera Corporation is the world's pioneer in system-on-a-programmable-chip (SOPC) solutions. Combining programmable logic technology with software tools, intellectual property and technical services, Altera provides high-value programmable solutions to approximately 14,000 customers worldwide. More information is available at www.altera.com.

NOTE: Altera, The Programmable Solutions Company, the stylized Altera logo, specific device designations and all other words that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of Altera Corporation in the U.S. and other countries. All other product or service names are the property of their respective holder.

     Contacts:
     Joanne Ostridge
     Altera Europe Limited
     +44-1494-602034
     
Email Contact

     Paul Rudkin
     Commsonic Limited
     +77-0-1223-871071
     
Email Contact

CONTACT: Joanne Ostridge of Altera Europe Limited, +44-1494-602034, or
Email Contact; or Paul Rudkin of Commsonic Limited, +77-0-1223-871071,
or Email Contact

Web site: http://www.altera.com/




Review Article Be the first to review this article
Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Jobs
Engr, Elec Des 2 for KLA-Tencor at Milpitas, CA
Senior FPGA Designer for Fidus Electronic Product Development at Fremont, CA
Test Development Engineer(Job Number: 17001697) for Global Foundaries at Santa Clara, CA
ASIC Design Engineer 2 for Ambarella at Santa Clara, CA
Technical Support Engineer Germany/UK for EDA Careers at San Jose, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy