OmniVision Launches Seventh Generation VGA CameraChip(TM) For Mobile Applications; Advanced OV7670 CMOS Sensor Improves Image Quality While Reducing Pixel Size and Module Height

SUNNYVALE, Calif.—(BUSINESS WIRE)—Aug. 15, 2005— OmniVision Technologies, Inc. (NASDAQ: OVTI), the world's leading supplier of CMOS image sensors, today launched the OV7670 CameraChip, a 1/6-inch VGA CMOS image sensor for mobile applications. With a pixel size reduced from 4.2 microns to 3.6 microns, the OV7670 uses a smaller optical format than its predecessor, the OV7660, which allows for a significant reduction in module height.

"OmniVision's ability to keep driving down pixel size and improving image quality allows module makers to continue shrinking camera module sizes and helps handset makers develop smaller and more sophisticated devices," said Jess Lee, OmniVision's Director of Product Marketing. "With the OV7670 sensor's small footprint, high image quality and new LCD scaler feature, we believe OmniVision is well positioned to meet these needs."

The OV7670's LCD scaler, a new feature recently launched with the 1.3 megapixel OV9655 image sensor, allows handset makers to scale images to the exact size of LCD screens, eliminating the need for a separate backend DSP. The OV7670 employs OmniVision's proprietary OmniPixel(TM) sensor architecture, which significantly increases signal-to-noise ratio and delivers exceptional low-light performance.

The low-voltage OV7670 image sensor provides the full functionality of a single-chip VGA camera and image processor in a small footprint package (3.8mm x 4.2mm), which allows for a camera module size as small as 6mm x 6mm x 4.5mm. It provides full-frame, sub-sampled or windowed 8-bit images in a wide range of formats controlled through a serial camera control bus (SCCB) interface. All required image processing functions including exposure control, gamma, white balance, color saturation, hue control, white pixel canceling and noise canceling are programmable through the SCCB interface.

The OV7670 comes in a lead-free package and is available now in volume production quantities.

About OmniPixel Technology

OmniPixel(TM) technology is the CMOS image sensor industry's first no-compromise technology for advanced image-sensor applications. It enables OmniVision's next generation of image sensors to deliver the light sensitivity, resolution, color fidelity and low noise of advanced CCD products, while also providing the proven advantages that designers have come to expect from OmniVision's CMOS solutions -- low cost, high integration, low power consumption, wide dynamic range and switchable still-image or video capture. OmniPixel products come with premium features such as auto-focus, zooming, panning and mechanical shutter control that allow OmniPixel technology to challenge CCDs in high-end camera markets.

About OmniVision

OmniVision Technologies, Inc. designs and markets high-performance semiconductor image sensors. Its OmniPixel and CameraChip products are highly integrated single-chip CMOS image sensors for mass-market consumer and commercial applications such as mobile phones, digital still cameras, security and surveillance systems, interactive video games, PCs and automotive imaging systems. Additional information is available at www.ovt.com.

Safe-Harbor Language

Certain statements in this press release, including statements regarding the performance achievements and capabilities of OmniVision's OV7670 CMOS image sensor, are forward-looking statements that are subject to risks and uncertainties. These risks and uncertainties, which could cause the forward-looking statements and OmniVision's results to differ materially, include, without limitation: potential errors, design flaws or other problems with the OV7670 VGA CMOS image sensor; risks associated with building customer acceptance of and demand for the OV7670; the development of the market for VGA sensors in the camera phone market as well as in markets for other portable applications incorporating image sensors; the rapid changes in technical requirements for camera phone products; competitive risks; as well as other risks detailed from time to time in OmniVision's Securities and Exchange Commission filings and reports, including, but not limited to, OmniVision's most recent annual report filed on Form 10-K. OmniVision expressly disclaims any obligation to update information contained in any forward-looking statement whether as a result of new information, future events or otherwise.

OmniVision, OmniPixel and CameraChip are trademarks of OmniVision Technologies, Inc.



Contact:
Investor Relations:        
Silverman Heller Assoc.                 
Philip Bourdillon, 310.208.2550            

Email Contact                       
or
Media Contact:  
Positio Public Relations
Martijn Pierik, 408.453.2400  

Email Contact              
or
OmniVision Technologies, Inc.
Scott Foster, 408.542.3077

Email Contact



Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

True Circuits:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Qualcomm’s Lu Dai: Energetic leadership for Accellera
More Editorial  
Jobs
Principal Engineer FPGA Design for Intevac at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
SOC Logic Design Engineer for Global Foundaries at Santa Clara, CA
Sr. Staff Design SSD ASIC Engineer for Toshiba America Electronic Components. Inc. at San Jose, CA
Upcoming Events
IoT Summit 2017 at Great America ballroom, Santa Clara Convention Center Santa Clara CA - Mar 16 - 17, 2017
SNUG Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Mar 22 - 23, 2017
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy