Atmel's 0.18 Micron Radiation Hardened ASIC Integrates Up to 5.5 Million Usable Gates

Extends Integration Boundaries for Space Rad-Hard Devices

NANTES, France, July 12 /PRNewswire-FirstCall/ -- Atmel(R) Corporation (NASDAQ: ATML), a global leader in the development and fabrication of advanced semiconductor solutions, announced today the release to production of a set of 0.18 micron CMOS cell-based ASIC libraries providing up to 5.5 million usable ASIC gates, the highest level of integration currently available in the space market.

With a total dose capability of up to 300 Krads and a latch-up threshold higher than 70-MeV/cm2/mg, the ATC18RHA lets designers integrate smaller, lighter and higher performing chips into aerospace electronics, space vehicles or navigation systems applications.

The ATC18RHA is a standard cell library encompassing all the specific functions and buffers necessary for space designs. These include 655 Mbps LVDS transmitters and receivers, PCI buffers, SEU hardened DFFs and cold sparing buffers. The ATC18RHA core operates with a 1.8-Volt power supply and two different sets of I/O buffer cells allow for interfacing with a 3.3- or 1.8- Volt logic, enabling designers to easily implement this new ASIC into any space design.

Special attention was paid to validating the ATC18RHA front and back-end design tools. They let designers, at an early stage of physical synthesis, take into account the parasitic effects such as switching noise, cross-talk, antenna effects and RC delay simulation, which are inherent to highly- integrated technologies.

Available in a selection of ceramic hermetic QFP (up to 352 pins) and MCGA (up to 625 pins) packages, the ATC18RHA is offered with pre-defined die sizes and pad rings. This standardization avoids expensive package development costs and reduces design lead-times.

Flight models are delivered tested to either QML Q & V or ESCC quality flows. The ATC18RHA supporting an SMD specification will be available in 3Q 2005.

A design kit is available without charge. It includes all the libraries for simulation, synthesis and other front-end activities, using Atmel or CAD vendor design tools, such as Cadence(R), Synopsys(R) or Mentor(R). Customer support is provided by Atmel's dedicated design centers in Europe (London, Milan, Munich and Nantes) and in the US (San Jose, CA).

This new 0.18 micron ASIC offering strengthens Atmel leadership in system integration solutions for the space industry. Atmel is the only supplier offering such a broad range of radiation-hardened products, including microcontrollers, SPARC-based microprocessors, memories, DSPs, re-programmable FPGAs and ASICs.

This ATC18RHA series has been developed with the support of the Centre National d'Etudes Spatiales (CNES) and the European Space Agency (ESA).

     DFF: Data Flip Flop
     LVDS: Low Voltage Differential Swing
     MCGA: Multi-layer solder Column Grid Array
     PCI: Peripheral Component Interconnect
     QFP: Quad Flat Pack
     SEU: Single Event Upset

    About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You Are(R).

NOTE: Atmel(R), logo and combinations thereof, Everywhere You Are(R) and others, are the registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.


Atmel's ATC18RHA product information may be retrieved at

     Press Contacts:
     Philippe Faure, Marketing Communications Manager - Microcontrollers
     Tel: +33 2 40 18 18 87, Email: 
Email Contact
     Ford Kanzler, Manager of Corporate Press Relations - USA and Asia
     Tel: +1 408 436 4343, Email: 
Email Contact
     Veronique Sablereau, Corporate Communications Manager - Europe
     Tel: +33 1 30 60 70 68, Fax: + 49 71 31 67 24 23
Email Contact

CONTACT: Philippe Faure, Marketing Communications Manager -
Microcontrollers, +33 2 40 18 18 87, or Email Contact, or
Ford Kanzler, Manager of Corporate Press Relations - USA and Asia,
+1-408-436-4343, or Email Contact, or Veronique Sablereau, Corporate
Communications Manager - Europe, +33 1 30 60 70 68, or fax, +49 71 31 67 24
23, or Email Contact, all of Atmel Corporation

Web site:

Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Reverie: All That Glitters is not Past
More Editorial  
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
Digital and FPGA Hardware Designer for Giga-tronics Incorporated at San Ramon, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
Technical Support Engineer for EDA Careers at Freemont, CA
SoC Design Engineer for Intel at Santa Clara, CA
Upcoming Events
European 3D Summit 2017 at 3, parvis Louis Néel 38054 Grenoble France - Jan 23 - 25, 2017
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy