QualCore Logic Announces Availability of 15 Silicon-Validated Analog IP Cores, Special I/Os for Graphics, Memory Interface Applications

High-Performance Cores Reduce Risk, Accelerate Development of SoC Designs

SUNNYVALE, Calif.—(BUSINESS WIRE)—Jan. 11, 2005— QualCore Logic, an intellectual property (IP) and full-service, mixed-signal application specific integrated circuit (ASIC) realization company, today announced immediate availability of 15 silicon-validated analog IP cores and special inputs/outputs (I/Os) for graphics and memory interface applications. Each of these was successfully validated in 0.13-micron process technology from two leading foundries to reduce risk and accelerate product development of system-on-chip (SoC) designs.

Remarks Mahendra Jain, QualCore Logic's president and chief executive officer (CEO): "QualCore Logic's strategy is to build the largest and most diverse portfolio of silicon-validated analog and mixed-signal IP and special I/Os. These 15 new IP cores bring that number to more than 400."

The 15 analog IP cores and special I/Os are available in the 0.13-micron 1.0v/3.3v process technology and are delivered as GDS II files. They support the video/imaging (see Figure 1), memory/graphics (see Figure 2) and peripheral computing interface (see Figure 3) markets. (See note at the end of the news release for details on getting copies of these figures.)

The Video Imaging IP consists of a 10-bit, 350 MHz triple video Digital to Analog Converter (DAC) designed to drive Red-Green-Blue Video Signals of display monitors and a 15 to 350 MHz video phase-locked loop (PLL) is designed to provide the clock.

Memory/Graphics IP satisfies the needs of project teams designing products to interface with double-data-rate (DDR) SDRAM memories and Graphic DDR memories. The first in this category is a 500 MHz SSTL I/O available to operate in a class I, class II or GDDR-II mode using the built-in On Die Termination (ODT) for calibration of internal terminations over Process, Voltage and Temperature (PVT). A matching 250 to 500 MHz analog double-data-rate (DLL) is available with separate master and slave cells. Having separate slave DLL cells allows it to be physically located close to separate Strobe Signals of the DDR applications, improving the signal integrity of the high-speed designs. A 250 to 1650 MHz high-speed PLL is available and can be used to generate the master clock for DDR and digital visual interface (DVI) systems.

The peripheral computing interface IP is used in the Advanced Graphics Port (AGP) market. A 533 MHz AGP 8x I/O has been designed to operate in 1x, 2x, 4x and 8x modes and uses an on-chip calibration technique for eliminating PVT dependencies. It works with a 66 to 533 MHz AGP PLL.

Finally, a few miscellaneous cells are available such as a PCI 2.3 I/O, a 300 MHz class I SSTL I/O, various crystal oscillators and a complete I/O library compatible with all of the special I/Os.

Each IP core is compliant with various graphics and memory interface specifications. Deliverables include: GDS II stream files, Spice netlist for layout versus schematics (LVS) verifications; design rule checks (DRC) and LVS verification reports and layer mapping file in text format; Library Exchange Format (LEF) footprint data; Verilog behavioral and .lib models.

Availability

All cores are available now for licensing. Pricing is available upon request.

For more details, visit the QualCore Logic website located at: http://www.qualcorelogic.com. Or, contact its Sales Department at (408) 541-0730, Ext. 205, or sales@qualcorelogic.com

About QualCore Logic

Founded in 1994, QualCore Logic is a leading provider of digital, mixed-signal and analog IP for system-on-chip (SoC) designs. It can take an engineering or register transfer level (RTL) specification to GDSII through final silicon. It operates design and support centers in Sunnyvale, Calif., and Hyderabad, India, with more than 150 design engineers. Corporate headquarters is located at: 1289 Anvilwood Avenue, Sunnyvale, Calif. 94089. Telephone: (408) 541-0730. Facsimile: (408) 541-0740. Email: sales@qualcorelogic.com. Web Site: http://www.qualcorelogic.com

Note to editors:

A Powerpoint file with figures 1-3 that illustrate QualCore Logic's capabilities for video/imaging, memory/graphics and peripheral computing interface is available upon request. Contact:

Nanette Collins

(415) 824-1899

nanette@nvc.com

QualCore Logic acknowledges trademarks or registered trademarks of other organizations for their respective products and services.



Contact:
Public Relations for QualCore Logic
Nanette Collins, 415-824-1899

Email Contact

Rating:


Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Upcoming Events
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy