Atmel Introduces World's First Sub $3 ARM7 Flash Microcontroller

Targeted at 8-bit Designs With in-System Programmable Flash, Single Supply Operation, BOD, POR, RC Oscillator, HW Security Bit and USB Device

SANTA CLARA, Calif., Oct. 19 /PRNewswire-FirstCall/ -- ARM Developers' Conference -- Atmel(R) Corporation (NASDAQ: ATML) introduces the world's first family of ARM7-based flash microcontrollers with prices starting at less then $3, targeted at 8-bit applications. The AT91SAM7S32 and the AT91SAM7S64 are the first members of a series of Small pincount Smart ARM7 Microcontrollers (SAM7S-series) with Flash densities of respectively 32kByte and 64kBytes. A 128kbyte and 256kbyte version, the AT91SAM7S128 and AT91SAM7S256, are planned for availability at the end of this year. Besides a jump in real-time performance over 8-bit microcontrollers, they are the world's first 32-bit microcontrollers to integrate a complete set of secure operation functions including a watchdog clocked by an on-chip RC oscillator, power supply monitors and hardware protection of the Flash memory. The AT91SAM7 microcontrollers are supported by low-cost development tools, bringing 32-bit real-time processing power to a wide range of cost-sensitive applications that have until now been limited to 8-bit performance.

The AT91SAM7S series focuses on the drivers for change from 8 to 32 bits, in particular improved deterministic performance for real-time applications. It achieves single-cycle instruction access from embedded Flash (a pre-requisite for deterministic performance) at 27 MIPS. Its Advanced Interrupt Controller enhances the basic interrupt facilities of the ARM7 processor to give vectored priority interrupt handling in a minimum number of instruction cycles. Its hardware bit set and reset registers (another Atmel enhancement of the basic ARM provision) enable single-cycle bit manipulation, obviating the need for masked read-modify-write sequences.

The porting and qualification of legacy code is a significant task for 8-bit microcontroller users migrating to a 32-bit MCU. To facilitate application development, the AT91SAM7S products embeds powerful debug capabilities centered around a JTAG In-Circuit-Emulation interface and complemented with on-chip hardware like misaligned address detection and watchdog deactivation during debug. Atmel supplies a kit including an evaluation board, JTAG-ICE interface, project examples and development tools identical to those for 8-bit microcontrollers, thereby reducing the learning curve.

The high level of functional integration of the AT91SAM7S microcontrollers includes a USB 2.0 full-speed device port for PC connectivity, and a wide variety of communication and control interfaces including an 8-channel 10-bit ADC. Peripheral data controllers provide a DMA function that reduces processor overhead during data transfers between external I/O channels and memory. A parallel I/O controller multiplexes the peripheral I/Os with a set of 32 programmable general-purpose I/O lines, thereby reducing the external pin count while providing additional flexibility of access. The on-chip voltage regulator enables single-supply operation at 3.3V.

The embedded Flash memory can be programmed in-system via the JTAG-ICE interface or via a parallel interface on a production programmer just prior to installation. This enables software development to continue until the final phase of hardware assembly, and software updates to be incorporated with no disruption to production. The Flash memory contains a hardware security bit that disables its external visibility, and sixteen lock bits that secure each of its 4K-byte lock regions. Its integrated brownout detector coupled with power-on-reset guards against accidental or deliberate code corruption during power-down. These are essential to preserve the confidentiality of application code.

Target applications for the AT91SAM7S series include appliance control, utility metering, security systems, data loggers, USB-based mobile phone and PC accessories.

Jacko Wilbrink, Atmel's ARM-based Product Manager commented, "The SAM7S-series are the first products of an exciting new family of Smart ARM Microcontrollers that fill the gap between 8-bit microcontroller cost and 32-bit real-time performance. They provide ease and speed of application development based on familiar features with enhanced performance and security at an extremely attractive price."

In quantities of 10k, the AT91SAM7S32 is available in a 48-lead LQFP package at a suggested resell of $2.90 and the AT91SAM7S64 in a 64-lead LQFP package, at $4.05.

About Atmel

Atmel Corporation is an industry leader in the design and manufacture of advanced semiconductors, with focus on microcontrollers, nonvolatile memory, logic, radio frequency (RF) components and sensors. These functions are marketed as standard products, application-specific standard products (ASSPs) or customer-specific products (ASICs) in order to provide a rapid and flexible response to the needs of Atmel's customers. Atmel products are manufactured on advanced CMOS, BiSMOS and Silicon Germanium (SiGe) processes.

Atmel(R), logo and combinations thereof are the registered trademarks and Everywhere You Are(SM) is the trademark of Atmel Corporation or its subsidiaries. ARM and combinations thereof are registered trademarks and trademarks of ARM Limited. "ARM" is used to represent ARM Holdings plc (NASDAQ: ARMHY); its operating company ARM Limited and the regional subsidiaries ARM, INC.; ARM KK; ARM Korea Ltd. Other terms and product names in this document may be the trademarks of others.


Atmel's AT91SAM7S product information is available at or by e-mail from Email Contact.

   Press Contacts
   Peter Bishop, Communications Manager, Atmel Rousset,
     Tel: (+33) (0)4 42 53 61 50, e-mail: 
Email Contact

   Veronique Sablereau, Corporate Communications Manager - Europe,
     Tel: (+33) (0)1 30 60 70 68, e-mail: 
Email Contact

   Clive Over, Corporate Communications Director - USA and Asia,
     Tel: (+1) 408 451-2855, e-mail: 
Email Contact

CONTACT: Peter Bishop, Communications Manager, Atmel Rousset,
+33-4-42-53-61-50, or Email Contact, or Veronique Sablereau, Corporate
Communications Manager - Europe, +33-1-30-60-70-68, or
Email Contact, or Clive Over, Corporate Communications
Director - USA and Asia, +1-408-451-2855, or Email Contact, all of

Web site:

Review Article Be the first to review this article

Featured Video
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Methodics User Group Meeting at Maxim Integrated 160 Rio Robles San Jose CA - Jun 5 - 6, 2018
2018 FLEX Korea at Room 402/ 403, COEX Seoul Korea (South) - Jun 20 - 21, 2018
IEEE 5G World FOrum at 5101 Great America Parkway Santa Clara CA - Jul 9 - 11, 2018
SEMICON West 2018 at Moscone Center North, Room 24-25, 730 Howard St, San Francisco, CA 94103, USA San Francisco CA - Jul 11 - 12, 2018
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise