Toshiba Launches Bipolar Stepping Motor Driver with Maximum Rating of 40V and 1.8A

TOKYO — (BUSINESS WIRE) — September 13, 2016Toshiba Corporation's (TOKYO: 6502) Storage & Electronic Devices Solutions Company today announced the launch of “TB62269FTAG,” a bipolar stepping motor driver offering a 40V high voltage and 1.8A current. Mass production starts at the end of this month.

This Smart News Release features multimedia. View the full release here:

Toshiba: a bipolar stepping motor driver "TB62269FTAG," offering a 40V high voltage and 1.8A current ...

Toshiba: a bipolar stepping motor driver "TB62269FTAG," offering a 40V high voltage and 1.8A current. (Photo: Business Wire)

High speed, high performance motor drives are required for applications including 3D printers, office automation equipment, banking terminals such as ATMs, banknote identification machines, amusement machines, and home appliances. In parallel, the downsizing of equipment is being accelerated by customer demand for space-saving equipment with excellent design. Measures to reduce products’ internal heat and power consumption are also growing in importance.

The new motor driver has a QFN32 package, smaller than the QFN48 package housing Toshiba’s current product, “TB62269FTG.” This size reduction will contribute to space saving on the PCB.

Toshiba will continue to enhance its product line-up and to meet diverse requirements for motor drive applications.

Main Features of New Product

1. Low heat generation

Heat generation is reduced by low on resistance (0.8Ω or less, upper + lower).

2. Low vibration and low noise

High-resolution 1/32 step (max.) motor drive technology reduces vibration and noise.

3. Small package

Heat treatment of the equipment and the module can be simplified by adopting a small, high-heat-radiation QFN32 package. This also downsizes the IC and reduces the cost.

4. Built-in error detection circuits

A thermal shutdown circuit and an overcurrent shutdown circuit contribute to equipment safety and reliability with the signals they output at the design stage.


3D printers, amusement machines (pachinko and slot machines), home appliances (refrigerators and air conditioners), industrial equipment (banking terminals such as ATMs), office and factory automation equipment)


Main Specifications of New Product

Product name   TB62269FTAG
Control I/F CLK-IN

Absolute maximum

40V, 1.8A
Package QFN32 (size: 5mm×5mm×1mm, pin pitch: 0.5mm)
Other features

Built-in error detection functions (thermal shutdown circuit and overcurrent shutdown circuit).

Error detection signal output function (ERR output)

Supports the power-on sequence by the single power drive

Mass production   End of September, 2016

1 | 2  Next Page »

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy