Maxim's Highly Integrated Femtocell Transceivers Simplify Compact Radio Designs

Femtocell transceivers support WCDMA and cdma2000® radio bands, accelerate time-to-market, and ease design with market-leading baseband partners.

SUNNYVALE, Calif., May 7, 2012 — (PRNewswire) — Maxim Integrated Products (NASDAQ: MXIM) introduces the MAX2550–MAX2553 femtocell transceivers for WCDMA (Bands 1 to 6 and 8 to 10) and cdma2000 (Band Class 0, 1, and 10).

The amount of data consumed by smartphones is rising and the increase in data transmission requires more base-station cell sites to receive and transmit the signals. With existing base-station cell sites maxed out on capacity, femtocells are becoming a fast-growing market. Carriers are also moving to femtocell transceivers that reside in a home or office and essentially provide an indoor base station to handle the cellular voice and data needs of an entire dwelling.

Service Providers Need More Compact, Less Costly Radio Designs

  • The MAX2550–MAX2553 transceivers reduce the number of external components, lower operation and maintenance costs, and facilitate more compact radio designs for modules and stand-alone femtocell applications.
  • The existing large macrocells have higher installation and maintenance costs.
  • In many areas, carriers struggle with space constraints and city regulations when they need to install more of these macrocell base stations.

Proven Femtocell Expertise Ensures Reliable Products

  • According to J. Madden, Principal Analyst with Mobile Experts, in 2011 Maxim "was very successful in the first round of 3G femtocell designs, having introduced a good set of transmitter and receiver products early in the design cycle."*
  • Time to market and ease of design are greatly improved by the MAX2550–MAX2553. They have a high level of compatibility with market-leading baseband providers.

Interface, Temperature, and Packaging

  • A MAX-PHY digital interface eliminates the additional cost and space typically incurred with external data converters.
  • MAX2550–MAX2553 are offered in a 7mm x 7mm TQFN package.
  • These transceivers are rated over the -40 degrees C to +85 degrees C temperature range.

For more information please visit www.maxim-ic.com/Femtocells.
For a hi res image, click here.

About Maxim

Maxim makes highly integrated analog and mixed-signal semiconductors. Maxim reported revenue of approximately $2.5 billion for fiscal 2011. For more information, go to www.Maxim-ic.com.

cdma2000 is a registered certification mark and registered service mark of the Telecommunications Industry Association.

* Madden, J., Principal Analyst, "Semiconductors for Small Cells," Mobile Experts, October 2011, p. 37.

Contact: 

Drew Ehrlich


408-331-4252


Drew.ehrlich@maxim-ic.com

SOURCE Maxim Integrated Products

Contact:
Maxim Integrated Products
Web: http://www.maxim-ic.com




Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
25th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC 2017) at Yas Viceroy Abu Dhabi Yas Marina Circuit, Yas Island Abu Dhabi United Arab Emirates - Oct 23 - 25, 2017
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise