CST E-News January 2010

High Performance SI/PI Solutions Workshop. February 1 2010. Santa Clara, CA.

 You are invited to our brand new “High Performance” workshop series focusing on getting designs to market faster.

The launch workshop for this series is on Monday February 1, 2010 at the Hyatt Regency hotel in Santa Clara. This is a FREE, half day, AM workshop and all DesignCon attendees and other interested parties are invited to attend.

  • 8:45-9:00:  Introduction to CST’s high performance solutions,  CST
  • 9:00-9:30:  Fast solutions for power integrity analysis, CST
  • 9:30-10:00:  Guest speaker, TBD
  • 10:00-10:30:  High speed serial link channel modeling, Gerardo Romo, CST
  • 10:30-11:00:  Break and refreshments
  • 11:00-11:30:  Cable interference and immunity/emissions analysis, CST
  • 11:30-12:00:  Guest speaker – Albert Wallash, Hitachi
  • 12:00-12:30:  New developments in EDA/SI/PI simulation, Peter Thoma, CTO CST

For more details and to register please go to:

www.cst.com/Content/Events/Details.aspx?eventId=1460

This event will roll out across North America in April and May. Locations to include, Phoenix, AZ, Los Angeles, CA, Waltham, MA, Ottawa, QB, Dallas, TX, Denver, CO, Chicago, IL, Dayton, OH, Arlington, VA, Vancouver, BC and Hillsboro, OR. More details to follow.

DesignCon 2010, Santa Clara, CA

Please stop by our booth near the entrance to see a demo of our brand new 2010 release or come to one or more of our collaborative conference papers to see how we are helping customers explore new and novel designs through 3D simulation.  

Tuesday, February 2, 2:50-3:30 PM “Chip-to-Chip Communication Beyond 25 Gbps: Modeling and Realization” Jianmin Zhang, Qinghua Bill Chen, Kelvin Qiu, Cisco. Martin Schauer, Antonio Ciccomancini Scogna, and Gerardo Romo, CST of America Inc. 

Wednesday, February 3, 2:00-2:40 PM “Efficient Modeling and Simulation for Package-PCB Co-Design and Co-Optimization”Martin Schauer, CST of America.  Hong Ahn, Namhoon Kim, Chris Wyland, Paul Wu, Xilinx.

Thursday February 4, 9:50-10:30 AM “Full-Wave Time Domain Modeling of Interconnects” Martin Schauer, CST of America Inc.  Alfred Neves, Tom Dagostino, Scott McMorrow, Teraspeed Consulting LLC

CST MICROWAVE STUDIO® Training – March

March training has just been announced as follows. For details and to sign up please follow the links.

Microwave and Antenna:

Framingham, MA, March 3-4:

http://www.cst.com/Content/Events/Details.aspx?eventId=1471

Signal Integrity:

Framingham, MA, March 24-25

http://www.cst.com/Content/Events/Details.aspx?eventId=1475

San Mateo, CA, March 24-25

http://www.cst.com/Content/Events/Details.aspx?eventId=1473

 

STUDIO SUITE 2010 Shipped

 All packages were shipped to customers this week.

 

For details on what’s new in this major release, look in the software under help – help contents – spotlight 2010 or go to www.cst.com/2010. For any problems with install, please contact technical support at 508 655 4444 or email Email Contact.

 

Sincerely,

 

Jonathan Oakley

VP, Sales & Marketing

CST of America,

650 472 3790

www.cst.com

 

High Performance SI/PI Solutions Workshop. February 1 2010. Santa Clara, CA.

 

You are invited to our brand new “High Performance” workshop series focusing on getting designs to market faster.

 

The launch workshop for this series is on Monday February 1, 2010 at the Hyatt Regency hotel in Santa Clara. This is a FREE, half day, AM workshop and all DesignCon attendees and other interested parties are invited to attend.

  • 8:45-9:00:  Introduction to CST’s high performance solutions,  CST
  •  9:00-9:30:  Fast solutions for power integrity analysis, CST
  •  9:30-10:00:  Guest speaker, TBD
  • 10:00-10:30:  High speed serial link channel modeling, Gerardo Romo, CST
  • 10:30-11:00:  Break and refreshments
  • 11:00-11:30:  Cable interference and immunity/emissions analysis, CST
  •  11:30-12:00:  Guest speaker – Albert Wallash, Hitachi
  • 12:00-12:30:  New developments in EDA/SI/PI simulation, Peter Thoma, CTO CST

For more details and to register please go to:

www.cst.com/Content/Events/Details.aspx?eventId=1460

 

This event will roll out across North America in April and May. Locations to include, Phoenix, AZ, Los Angeles, CA, Waltham, MA, Ottawa, QB, Dallas, TX, Denver, CO, Chicago, IL, Dayton, OH, Arlington, VA, Vancouver, BC and Hillsboro, OR. More details to follow.

 

DesignCon 2010, Santa Clara, CA

 

Please stop by our booth near the entrance to see a demo of our brand new 2010 release or come to one or more of our collaborative conference papers to see how we are helping customers explore new and novel designs through 3D simulation.  

Tuesday, February 2, 2:50-3:30 PM “Chip-to-Chip Communication Beyond 25 Gbps: Modeling and Realization” Jianmin Zhang, Qinghua Bill Chen, Kelvin Qiu, Cisco. Martin Schauer, Antonio Ciccomancini Scogna, and Gerardo Romo, CST of America Inc. 

Wednesday, February 3, 2:00-2:40 PM “Efficient Modeling and Simulation for Package-PCB Co-Design and Co-Optimization”Martin Schauer, CST of America.  Hong Ahn, Namhoon Kim, Chris Wyland, Paul Wu, Xilinx.

Thursday February 4, 9:50-10:30 AM “Full-Wave Time Domain Modeling of Interconnects” Martin Schauer, CST of America Inc.  Alfred Neves, Tom Dagostino, Scott McMorrow, Teraspeed Consulting LLC

 

 

CST MICROWAVE STUDIO® Training – March

 

March training has just been announced as follows. For details and to sign up please follow the links.

 

Microwave and Antenna:

 

Framingham, MA, March 3-4:

http://www.cst.com/Content/Events/Details.aspx?eventId=1471

 

Signal Integrity:

 

Framingham, MA, March 24-25

http://www.cst.com/Content/Events/Details.aspx?eventId=1475

San Mateo, CA, March 24-25

http://www.cst.com/Content/Events/Details.aspx?eventId=1473

 

STUDIO SUITE 2010 shipped

 

All packages were shipped to customers this week.

 

For details on what’s new in this major release, look in the software under help – help contents – spotlight 2010 or go to www.cst.com/2010 . For any problems with install, please contact technical support at 508 655 4444 or email Email Contact .

 

 

Sincerely,

 

Jonathan Oakley

VP, Sales & Marketing

CST of America,

650 472 3790

www.cst.com




Review Article Be the first to review this article
Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Jobs
Test Development Engineer(Job Number: 17001697) for Global Foundaries at Santa Clara, CA
ASIC Design Engineer 2 for Ambarella at Santa Clara, CA
Technical Support Engineer Germany/UK for EDA Careers at San Jose, CA
Senior FPGA Designer for Fidus Electronic Product Development at Fremont, CA
Timing Design Engineer(Job Number: 17001757) for Global Foundaries at Santa Clara, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy