47th Design Automation Conference Announces Calls for Submissions to Technical Program

 Deadlines begin on October 26, 2009

Louisville , Colo. –– October 21, 2009 –– The 47th Design Automation Conference (DAC), the premier conference devoted to electronic design and design automation (EDA), has opened the first Call for Contributions to the technical program. The 47th DAC will be held at the Anaheim Convention Center, in Anaheim, California from June 13-18, 2010. IC designers, application engineers, design flow developers, vendor-customer teams and students are invited to submit proposals for eight different areas of the technical program enumerated below. DAC is also accepting proposals for workshops and co-located events.

Special Session Suggestions:

DUE BEFORE 5:00pm MT, October 26, 2009

DAC invites suggestions for special sessions, which consist of technical contributions devoted to a topic of strong contemporary or future interest. The topic of a special session must represent an emerging area that does not yet receive sufficient focus from research papers. Suggestions must include descriptions of the proposed papers and speakers as well as the importance of the special session to the DAC audience.

See Special Session submission guidelines at http://www.dac.com/47th/PDFs/47th_DAC_SpecialSession_Guidelines.pdf

Panel and Tutorial Suggestions:

DUE BEFORE 5:00pm MT, October 26, 2009

Suggestions for panels and tutorials should not exceed two pages, should describe the topic and intended audience, and should include a list of suggested participants. Tutorial suggestions must include a bulleted outline of covered topics.

See the Full-day Tutorial Submission guidelines at http://www.dac.com/47th/PDFs/47th_DAC_FullDay_Tutorial_Submission_Guidelines.pdf

User Track Presentations:

Extended Abstracts DUE BEFORE 5:00pm MT, January 18, 2010

User Track Presentations address the real-life issues facing IC designers, application engineers, and design flow developers, providing valuable insights and experiences with in-house or commercial EDA tool flows. Presentations may describe the application of EDA tools to the design of a novel electronic system or the integration of EDA tools within a design flow or methodology to produce such systems.

Initial submissions are in the form of a two-page extended abstract. Final submissions will be in the form of a PowerPoint presentation and an optional paper. User Track authors will not be required to sign a copyright release form.

See details and submission categories at http://www.dac.com/47th/UTinfo.html

Research Papers:

DUE BEFORE 5:00pm MT, November 19, 2009

Original research papers are solicited from industry and the research/academic community. While submissions in all areas of design automation are welcome, DAC specifically solicits research papers in the areas of multicore/many core architectures, system prototyping technology and embedded software design and debug.

Submissions must not identify the author(s) by their name(s) or affiliation(s) anywhere on the manuscript or abstract, with all references to the author(s)’s own previous work or affiliations in the bibliographic citations being in the third person.  All research papers will be reviewed as finished papers. Authors of accepted papers must sign a copyright release form for their paper. See submission topic categories at http://www.dac.com/47th/PDFs/47DAC_CFP.pdf

See format and submission guidelines at http://www.dac.com/47th/PDFs/47th_DAC_Research_Paper_Guidelines.pdf

Wild and Crazy Ideas (WACI) Papers

DUE BEFORE 5:00pm MT, November 19, 2009

WACI Papers cover interesting activities on a wide variety of topics that do not fit in the conventional mold. The WACI track features novel (and even preliminary or unproven) technical ideas. The aim of WACI is to promote revolutionary and “way-out” ideas that inspire discussion among conference attendees, create a buzz, and get people talking. Submissions should not exceed two pages, but must otherwise follow the rules and deadlines for the research papers. Unlike a DAC research paper that explores a specific technology problem and proposes a complete solution to it, with extensive experimental results, a WACI paper could present less developed but highly innovative ideas related to areas relevant to DAC. All WACI accepted papers will be required to post a two-minute video describing the work as part of the acceptance process.

See submission details at http://www.dac.com/47th/PDFs/47th_DAC_WACI_Submission_Guidelines.pdf

Student Design Contest Submissions:

DUE BEFORE 5:00pm MT, November 25, 2009  

Jointly sponsored by ISSCC and DAC, the contest promotes excellence in the design of electronic systems within an academic environment and provides a forum in which undergraduate/graduate students’ ingenuity can be shared with an audience of academic/industrial technical experts. The winners will present their designs through posters at ISSCC 2010 and DAC 2010. Designs may be targeted towards analog, digital, MEMS, optics, biological, or programmable circuits and embedded systems/platforms in any of the three categories: operational, system level, or conceptual.

See submission details at http://www.dac.com/47th/PDFs/47th_SDC_Submission_Guidelines.pdf

Workshops:

DUE BEFORE 5:00pm MT, January 29, 2010

Workshops focus on topics related to design, design methodologies, and design automation.

See submission topic categories at http://www.dac.com/47th/PDFs/47DAC_CFP.pdf

 

For additional information on all submissions, please see http://www.dac.com/47th/PDFs/47DAC_CFP.pdf

About DAC

The Design Automation Conference (DAC) is recognized as the premier event for the design of electronic circuits and systems, and for Electronic Design Automation (EDA) and silicon solutions. A diverse worldwide community representing more than 1,000 organizations attends each year, represented by system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities. Close to 60 technical sessions selected by a committee of electronic design experts offer information on recent developments and trends, management practices and new products, methodologies and technologies. A highlight of DAC is its Exhibition and Suite area with approximately 200 of the leading and emerging EDA, silicon, IP and design services providers. The conference is sponsored by the Association for Computing Machinery (ACM), the Electronic Design Automation Consortium (EDA Consortium), and the Institute of Electrical and Electronics Engineers (IEEE), and is supported by ACM's Special Interest Group on Design Automation (SIGDA) and IEEE's Council on Electronic Design Automation (CEDA). More details are available at: www.dac.com.

 

Design Automation Conference acknowledges trademarks or registered trademarks of other organizations for their respective products and services. 

#          #          #

For more information, please contact:
Cayenne Communications

408.501.8829

Email Contact




Review Article Be the first to review this article
CST: Webinar November 9, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Teklatech: Work smart, Not hard
More Editorial  
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Upcoming Events
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
The 2017 International Test Conference at Fort Worth Convention Center Fort Worth TX - Oct 31 - 2, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series
TrueCircuits: UltraPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise