ARM and Mentor Graphics Announce Support for Nucleus RTOS and Nucleus Graphics in the RealView Development Suite

WILSONVILLE, Ore. & CAMBRIDGE, England — (BUSINESS WIRE) — October 21, 2009 — Mentor Graphics Corporation (NASDAQ: MENT) and ARM (LSE: ARM) (NASDAQ: ARMH) today announced at ARM TechCon 3, Santa Clara, Calif., a comprehensive software development solution for Nucleus® RTOS and Nucleus Graphics on ARM® processors. This is the result of a close collaboration to develop Nucleus RTOS awareness in the ARM RealView® Development Suite and to include the RealView Compiler in the Nucleus distribution.

Mentor Graphics has adopted the RealView Compiler as the reference compiler for Nucleus RTOS and middleware, which will result in end products with even higher performance and lower memory requirements. The Nucleus and EDGE™ development kits include an evaluation version of the RealView Compiler, and Mentor Graphics will distribute a full version of the compiler as part of their product offering.

The RealView Development Suite enables a seamless evaluation of Nucleus RTOS and the Nucleus Graphics 3D GUI technology by running pre-packaged examples on its fast Real-Time System Models. RealView Debugger supports kernel-aware debugging of the Nucleus kernel and can be used to do run-mode debug of Nucleus applications. The ARM Profiler can non-intrusively analyze Nucleus applications, generating profiling reports and optimization information.

“Mentor provides leading embedded technologies for today’s advanced products, including support for Nucleus RTOS, Linux, and Android-based devices,” said John Cornish, System Design Division executive vice president and general manager, ARM. “The addition of support for Nucleus RTOS in our leading RealView Development Suite provides an optimum solution for accelerated product development and innovation.”

“The RealView Compiler is the best set of compilation tools for ARM processors and is essential to get the best performance out of Mentor’s RTOS and GUI products,” said Glenn Perry, Mentor Graphics Embedded Systems Division general manager. “Our agreement with ARM will enable customers to quickly create exciting new products to meet market needs.”

About ARM

ARM designs the technology that lies at the heart of advanced digital products, from wireless, networking, and consumer entertainment solutions to imaging, automotive, security, and storage devices. ARM’s comprehensive product offering includes 32-bit RISC microprocessors, graphics processors, video engines, enabling software, cell libraries, embedded memories, high-speed connectivity products, peripherals, and development tools. Combined with comprehensive design services, training, support and maintenance, and the company’s broad Partner community, they provide a total system solution that offers a fast, reliable path to market for leading electronics companies. More information on ARM is available at http://www.arm.com.

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services, and award-winning support for the world’s most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $800 million and employs approximately 4,425 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon, 97070-7777. World Wide Web site: http://www.mentor.com/.

Mentor Graphics and Nucleus are registered trademarks and EDGE is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.

ARM and RealView are registered trademarks of ARM Limited. All other brands or product names are the property of their respective holders. “ARM" is used to represent ARM Holdings plc; its operating company ARM Limited; and the regional subsidiaries ARM Inc.; ARM KK; ARM Korea Limited; ARM Taiwan Limited; ARM France SAS; ARM Consulting (Shanghai) Co. Ltd.; ARM Belgium N.V.; ARM Germany GmbH; ARM Embedded Technologies Pvt. Ltd.; ARM Norway AS; and ARM Sweden AB.

Photos/Multimedia Gallery Available: http://www.businesswire.com/cgi-bin/mmg.cgi?eid=6078612&lang=en



Contact:

Mentor Graphics
Larry Toda, +1 503-685-1664
Email Contact
or
ARM
Michelle Spencer, +44 1628-427-780
Email Contact




Review Article Be the first to review this article

EMA:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Retail Therapy: Jump starting Black Friday
Peggy AycinenaIP Showcase
by Peggy Aycinena
REUSE 2016: Addressing the Four Freedoms
More Editorial  
Jobs
Principal Circuit Design Engineer for Rambus at Sunnyvale, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
AE-APPS SUPPORT/TMM for EDA Careers at San Jose-SOCAL-AZ, CA
ACCOUNT MANAGER MUNICH GERMANY EU for EDA Careers at MUNICH, Germany
Upcoming Events
2016 IEEE International Electron Devices Meeting at Hilton San Francisco Union Square 333 O’Farrell Street San Francisco CA - Dec 3 - 7, 2016
Zuken Innovation World 2017, April 24 - 26, 2017, Hilton Head Marriott Resort & Spa in Hilton Head Island, SC at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy