2002 A Solid Year for Get2Chip; 130 Design Completions, Including 50 Million Gate Design

SAN JOSE, Calif.--(BUSINESS WIRE)--Jan. 28, 2003--Get2Chip(TM), Inc., an electronic design automation (EDA) supplier of system-on-chip (SoC) synthesis, announced today that 2002 was a record year for the company. Get2Chip saw record orders, design completions, and new customer adoptions of its RTL Compiler, G2C-RC(TM), and Architectural Compiler, G2C-AC(TM).

Customers and Design Completions

"2002 was a great year for us. That our software has been adopted by the leading producers of processor, graphics, and networking chips speaks volumes of the capabilities and quality of results produced by G2C-RC(TM) and G2C-AC(TM)," notes Bernd Braune, Chairman and CEO of Get2Chip. "Our software was used in over 130 design completions. The average complexity of those designs was 3 million gates with the largest designs being over 50 million gates of synthesized logic."

Power Flows

Customers made the switch to Get2Chip because of the company's team support and because of Get2Chip's timing driven synthesis technology, which reduces the risk in complex chip design projects. During 2002, Get2Chip established seven power flows with RTL-Compiler: G2C-RC(TM) with Magma's Blast Fusion; G2C-RC(TM) with Physical Compiler and Apollo; G2C-RC(TM) with Astro; G2C-RC(TM) with First Encounter, Physical Compiler, and Nanoroute; G2C-RC(TM) with Physical Compiler and Nanoroute; G2C-RC(TM) with Apollo and Sapphire; and G2C-RC(TM) with Silicon Ensemble/PKS.

The Future

"For 2003, we expect the number of design starts in SoC of greater than 10 million gates to grow rapidly; as such, we will continue to expand our position as the best in class synthesis," says Braune. "We will continue to focus on key accounts and on the massive chips of the 130 to 90 nanometer era."

About Get2Chip

Get2Chip, Inc., is a leading supplier of software products that enable the design of the world's most complex integrated circuits (ICs), primarily found in the communications, wireless, computer, and consumer product markets. It was launched in 2000 by semiconductor veterans and chip design tool experts from Cadence Design Systems, Inc. (NYSE:CDN), LSI Logic Corporation (NYSE:LSI), Mentor Graphics Corporation (Nasdaq:MENT), Synopsys (Nasdaq:SNPS) and VLSI Technology -- now part of Philips Semiconductors (NYSE:PHG, AEX:PHI). Its breakthrough front-end tool suite provides fully integrated, multi-level synthesis that offers the flexibility to do chip design at the architectural, register transfer (RTL) or gate level. Get2Chip's products run on Sun and Hewlett Packard, and PC under Linux. Get2Chip is privately held and has development centers in San Jose, Calif., and Munich, Germany. Corporate headquarters: 2107 North First Street, Suite 350, San Jose, Calif. 95131. Telephone: 408/501-9600. Facsimile: 408/501-9610. Email: Email Contact. Web Site: http://www.get2chip.com.

Note to Editors: Get2Chip, G2C-AC, G2C-RC and RTL Compiler are trademarks of Get2Chip. All other product and company names are trademarks and registered trademarks of their respective companies.

CONTACT: Get2Chip, Inc.
             Jeff Mazzoni, 408/501-9543
Email Contact

Review Article Be the first to review this article

True Circuits:

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
SENIOR ASIC Design Engineer for TiBit Communications at Petaluma, CA
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
DownStream: Solutions for Post Processing PCB Designs
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy