Intellitech Offers New Concurrent JTAG Test Platform for PCBs with ARM Based Processors

SANTA CLARA, Calif.—(BUSINESS WIRE)—October 25, 2007— Intellitech Corporation, www.intellitech.com, the leader in lowering electronic product costs through IEEE 1149.1/JTAG, has announced the PT100 Pro test platform for testing PCBs with processors based on ARM(R) architectures. The PT100 Pro enables customers to reduce test costs and increase fault coverage by combining mixed-signal, concurrent 1149.1/JTAG and CPU emulation based functional tests in a single platform for testing up to thirty-two PCBs at a time. The tester is an ideal solution for PCB assemblies used in the cost sensitive Mobile, Home and Embedded markets. A number of customer specific versions of the tester are already in full production use in Southeast Asia.

The PT100 Pro is based on Intellitech's award winning PT100 and its patented CJTAG (Concurrent JTAG) technology which enables massive concurrent 1149.1/JTAG based test and emulation. The concurrent ARM based emulation test support enables the tester to go beyond boundary-scan stuck-at-faults to include at-speed cluster testing of all of the PCB components including non-1149.1 devices on a single tester platform. Power, mixed-signal and analog testing are achieved through the PT100 Pro's built-in PXI instruments, power supplies and relays.

"The ARM family accounts for approximately 75% of all the embedded 32-bit CPUs so it was a natural choice for us to target ARM for this tester's CPU-based functional test support," said CJ Clark, CEO of Intellitech Corp. "This tester fills the gap where in-circuit testers can't perform at-speed functional test through the CPU emulation port and frequently are limited as to how many PCBs can be tested at once due to JTAG test pattern depth." "It compares very well on the three "C"s customers care about, cost, coverage, and concurrency. The functional test adds higher fault coverage and the thirty-two PCB concurrent test provides better throughput when compared to an in-circuit tester coupled with a four port boundary-scan controller," Clark concluded.

The PT100 Pro supports up to thirty-two 1149.1 controller ports, up to 1870 analog/digital test pins with pneumatic or vacuum based fixture interface, PXI chassis and PXI measurement block, dual programmable power supplies, integrated dual-core Pentium based computer with raid drive, touch screen monitor, lockable keyboard, bar code scanner and Intellitech's ScanExecutive Production Test Software. Prices range from $45K-$80K depending on configuration.

About Intellitech

http://www.intellitech.com/company/about.asp

Trademarks

ARM is a registered trademark of ARM Holdings plc. Intellitech and CJTAG are registered trademarks of Intellitech Corp.

Contact:

Intellitech Corporation
Kareen Lefoley, 603-868-7116x106
Email Contact




Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Qualcomm’s Lu Dai: Energetic leadership for Accellera
More Editorial  
Jobs
SOC Logic Design Engineer for Global Foundaries at Santa Clara, CA
Sr. Staff Design SSD ASIC Engineer for Toshiba America Electronic Components. Inc. at San Jose, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Principal Engineer FPGA Design for Intevac at Santa Clara, CA
Upcoming Events
IoT Summit 2017 at Great America ballroom, Santa Clara Convention Center Santa Clara CA - Mar 16 - 17, 2017
SNUG Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Mar 22 - 23, 2017
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy