Carbon Design Systems Repeats Webinar on Automatic Model Creation for ARM RealView SoC Designer

WALTHAM, Mass.—(BUSINESS WIRE)—October 25, 2007— Carbon Design Systems

Who: Carbon Design Systems(TM), the leading supplier of tools for the automatic creation, validation and deployment of virtual hardware models.

What: Will host a 45-minute webinar on how to use automatic model generation with RealView(R) System on Chip (SoC) Designer from ARM(R).

Software developers, hardware architects and firmware designers will learn how to develop hardware-accurate models, accelerate the execution of a virtual platform and concurrently debug real software against a model of the actual hardware implementation.

When: Tuesday, October 30, at 2 p.m. E.D.T. (11 a.m. P.D.T.)

Where: Online webex webinar through web browser.

Webinar Registration:

http://www.carbondesignsystems.com/events_webinars.shtml

About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 375 Totten Pond Road, Waltham, Mass., 02451. Telephone: (781) 890-1500. Facsimile: (781) 890-1711. Email: info@carbondesignsystems.com. Web site: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

Contact:

Public Relations for Carbon Design Systems
Nanette Collins, 617-437-1822
Email Contact




Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
DDR 3-4-5 Developer with VIP for EDA Careers at San Jose, CA
Senior Methodology Automation Engineer for EDA Careers at San Jose, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
11th International Conference on Verification and Evaluation of Computer and Communication Systems at 1455 DeMaisonneuve W. EV05.139 Montreal Quebec Canada - Aug 24 - 25, 2017
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy