Pulsic Awarded Patent for Productivity Improving Spine-and-Stitch Chip Design Software

BRISTOL, England—(BUSINESS WIRE)—September 12, 2007— Pulsic Limited, the leader in custom design automation for memory, today announces that it has been granted a patent by the US Patent Office for its spine-and-stitch routing technology. The patent, "Method of automatic shape-based routing of interconnects in spines for integrated circuit design", addresses optimising the layout of long aspect ratio nets found in memory design and automates a previously manual process.

Developed as part of Pulsic's Unity(TM) suite, this new proprietary solution, builds on the shape-based advantage to routing complex topologies and delivers major productivity improvements to designers of complex chips, especially those targeted for the strategically important memory segment.

Spine and Stitch is a linear routing style used to connect custom cells placed in channels or spine areas of memory. These routing areas are often found in the layout of peripheral logic for DRAM, SRAM and Flash memory, and are characterised by extreme aspect ratios, producing long and narrow routing footprints. The spines are very long and the stitches are shorter orthogonal tracks, which gridded routers are unable to guarantee.

Typically there are only two or two and a half layers of interconnect, the half layer being a highly resistive layer which requires extremely short connection lengths.

Spine Routing is available as an option within UniRoute, the routing component of Unity(TM), Pulsic's integrated physical design solution for custom design automation for memory.

Mark Waller, VP of Research and Development, explains "Our custom design automation solutions are bringing productivity gains in critical and complex design areas normally reserved for manual design. This is an important patent to protect the innovations that we have made in the core technology of our shape-based solution."

About Pulsic

Pulsic Limited is a fast growing EDA company focused on custom design automation for memory. Pulsic's leading physical design software improves the design productivity at seven of the top ten memory companies by automating the layout of peripheral and control logic. Pulsic's product range includes hierarchical floorplanning, detailed placement, automatic routing and interactive editing. Pulsic has delivered more than 150 tape-outs with over 40 customers worldwide and is the only supplier of specialized layout automation for memory. Pulsic was founded in January 2000 and is a privately held company, headquartered in Bristol, UK. For more information, email info@pulsic.com, telephone +44 (0)117 325 5000 or visit www.pulsic.com.

Contact:

PR Europe:
For Pulsic Limited
Lloyd Pople, +44 (0)870 285 1650
Email Contact
or
Pulsic Limited:
Kevin Steptoe, +44 (0)117 325 5019
Email Contact
or
PR North America:
For Pulsic Limited
Nanette V. Collins, +1-617-437-1822
Email Contact




Review Article Be the first to review this article
CST: Webinar October 19, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
DVCon Europe 2017: Munich and So much more
More Editorial  
Jobs
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Field Application Engineer for Teradyne Inc at San Jose, CA
Analog Hardware Engineer for Teradyne Inc at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
FPGA Engineer for Teradyne Inc at San Jose, CA
Upcoming Events
Preparing for the Cognitive Era: Education, Occupation and You at SJSU Student Union Theater 211 South 9th Street San Jose CA - Oct 18, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017
15th IEEE/ACM ESTIMedia 2017 at Seoul Korea (South) - Oct 19 - 20, 2017
ESTIMedia 2017 at Seoul Korea (South) - Oct 19 - 20, 2017
CST: Webinar series



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise