Silicon Canvas to Demo new "Built-in DFM" at DAC 44

Other Demos & IPL Workshop Sign-Up also Available On-Line

San Jose, Calif., May 9, 2007 - Silicon Canvas, developer of the Laker suite of high-performance tools for custom IC design, will be demonstrating the latest in advanced custom IC design at the 44th Design Automation Conference in San Diego California, June 4-7. Laker's new built-in DFM will be featured, showing how to focus on prevention rather than treatment in a DFM design flow. The latest advances in Laker's DDL (design/constraint-driven) and SDL (schematic-driven) flows will also be demonstrated. For a complete list of demo topics and to register on-line, please visit Silicon Canvas' website at www.sicanvas.com and follow the DAC demonstration link.

"Silicon Canvas is making custom IC design exciting again by offering technology-leading products in a market that had been stagnant for more than a decade," said Dr. Hau-Yung Chen, President of Silicon Canvas. "If you are not familiar with Laker, you are in for a treat. But, even if you are one of our over 250 Laker customers worldwide, we still have some excitement in store for you!"

In addition, Silicon Canvas, a founding member of the IPL (Interoperable Pcell Libraries) initiative, will be co-sponsoring an IPL luncheon workshop on Wednesday, June 6th. Registration for the luncheon is now available at www.iplnow.com. Besides the workshop, Silicon Canvas will be supporting the work of the IPL initiative at the IPL booth (#2957) and will present at the IPL showcase at the Synopsys Interoperability Breakfast on Wednesday morning.

Silicon Canvas' 2007 DAC theme is "The Art of IC Design" look for the Laker artist in booth #2379 and on Silicon Canvas T-shirts throughout the show.

About Silicon Canvas: Silicon Canvas, Inc., a privately held California corporation, was founded in 2001 by Dr. Hau-Yung Chen and other EDA veterans with extensive design and EDA experience. Silicon Canvas is the technology leader for full custom design solutions. The company develops the Laker suite of tools - a completely new technology founded on best practices in computer software engineering with a clear focus on nanometer design requirements for analog, mixed signal, large complex IC's, ASSP, SoC, test key designs and flat panel layout. Silicon Canvas' toolsets bring more automation and higher performance capabilities to any design project which requires a more effective full custom layout solution. The company's web site is at http://www.sicanvas.com.

Contact: Richard Morse
Phone: (408) 321-0888 X 106
Email Contact


Silicon Canvas and Laker are registered trademarks of Silicon Canvas, Inc. All other trademarks or registered trademarks are the property of their respective owners.

Reviews:
Review Article
  • October 09, 2008
    Reviewed by 'Victor'
    Hi,
    I will be visiting the DAC conferance at San Diego.
    Would like to meet Silicon Device. To get reviews after the event check out the follwoing link.
    http://www.fpgacentral.com/fpga-forum/going-44th-dac-san-diego-ca
    -Victor

      Was this review helpful to you?   (Report this review as inappropriate)


For more discussions, follow this link …

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Staff Software Engineer - (170059) for brocade at San Jose, CA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy