DAFCA Adds Williams and Hogan to Technical Advisory Board

FRAMINGHAM, Mass.—(BUSINESS WIRE)—Aug. 17, 2006— DAFCA, Incorporated, the leading vendor of on-chip reconfigurable debug infrastructure, announces the addition of two new members to the DAFCA Technical Advisory Board, Dr. Thomas Williams and Jim Hogan. These distinguished semiconductor industry veterans will assist the DAFCA executive management team in the areas of technology strategy and market analysis, and offer insight and direction to support continued corporate growth.

Dr. Thomas W. Williams is a Synopsys Fellow and was formerly the manager of the VLSI Design for Testability group with IBM Microelectronics Division. He received a BSEE from Clarkson University, an M.A. in pure mathematics from the State University of New York at Binghamton, and a Ph.D. in electrical engineering from Colorado State University. He has received numerous best paper awards from the IEEE and ACM, is the founder or co-founder of a number of workshops and conferences dealing with testing, and was twice a Distinguished Visitor lecturer for the IEEE Computer Society. Dr. Williams has previously served on the Computer Society Board of Governors and the IEEE Board of Directors, and was the society's 2000 Treasurer. He is a member of the Eta Kappa Nu, Tau Bata Pi, IEEE, ACM, Sigma Xi, and Phi Kappa Phi. In 1985 and 1997, he was a Guest Professor and Robert Bosch Fellow at the Universitaet of Hannover, Hannover, Germany. He is also serving as an Adjunct Professor at the University Calgary, Alberta Canada. Dr. Williams was named an IEEE Fellow in 1988 and received the Computer Society's W. Wallace McDowell Award for outstanding contributions to the computer art in 1989.

Jim Hogan has worked in the semiconductor industry for over three decades. His experience includes time as a senior executive in electronic design automation, semiconductor intellectual property, semiconductor equipment, and fabrication companies. Immediately prior to joining Telos Venture Partners in 2004, Jim was Senior Vice President of Business Development of Artisan Components. Previously, Jim was Senior Vice President of Business Development and the senior member of the Office of Chief Technologist at Cadence Design Systems. Jim was a Cadence Executive Fellow and held several positions at Cadence including President of Cadence Japan, Corporate Vice President of Marketing, and Corporate Vice President for Field Operations. He was also Chief Operating Officer of Smart Machines, Inc., a semiconductor equipment automation company. Jim also worked for National Semiconductor for 10 years and for Philips. At both companies, he established device physics laboratories globally. Jim's interest in process and design automation for integrated circuits grew from his experiences between 1972 and 1982 at his family's business, which developed semiconductor-packaging equipment. Jim holds a BA degree in mathematics, a BS degree in computer science and an MBA all from San Jose State University. He serves on the Board of Advisors at San Jose State's School of Engineering, and on the board of directors of a number of Electronic Design Automation companies.

"We are delighted that two of the leading lights of the EDA industry have agreed to lend DAFCA their time and enormous talent," said Peter Levin, President and CEO of DAFCA. "Now that we have moved from product development to revenue -- with three of the top ten semiconductor companies as customers -- we look forward to having Tom and Jim contributing their expert advice and analysis to our technology roadmap and market strategy."

ABOUT DAFCA

DAFCA, Inc. is a design automation software company that shortens post-silicon SoC validation and in-system bring-up. The DAFCA ClearBlue(TM) software suite and instrumentation library allows design teams to incorporate our patented reconfigurable debug infrastructure into their designs to observe, discover and diagnose functional errors at-speed, leading to dramatically lower development costs and accelerated time to volume silicon. Learn more about the company at www.dafca.com.



Contact:
DAFCA, Inc.
Richard Curtin, 508-663-3311

Email Contact
or
Skye Marketing Communications
Leslie Cumming, 415-285-2352

Email Contact

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy