Incentia DesignCraft and TimeCraft Adopted By ITE as Its Synthesis and Timing Tapeout Software

Smallest Possible Chip Area and Power Consumption, Fast Runtime Critical for Tape-out Success

SANTA CLARA, Calif. and HSINCHU, Taiwan –August 9, 2005 – Incentia Design Systems, Inc., an EDA company in the synthesis and timing market, and ITE Tech. Inc. (Stock Ticker: 3014), one of Taiwan's leading IC design houses, today announced that ITE has adopted Incentia DesignCraft® and TimeCraft® software as the logic synthesis and timing analysis tools in its production tape-out flow.

DesignCraft’s integrated logic, DFT and low power synthesis capability helped ITE achieve the smallest possible chip area chip and power consumption, while meeting timing constraints. TimeCraft’s fast analysis speed shortened timing analysis turnaround time. Both tools were successfully used to tape out ITE’s designs and met ITE’s design requirements and expectations.

“We have adopted Incentia’s TimeCraft and DesignCraft for our front-end timing analysis and integrated logic, DFT and low power synthesis flow,” said Sander Kao, Director of Engineering Technology Div. at ITE. “We are very pleased that Incentia’s synthesis solution not only produced the smallest possible chip area and power consumption, but also greatly shortened our design turnaround time due to its fast runtime and smooth interface to our back-end ATPG and automatic Place & Route flow.”

“Incentia’s timing and synthesis software continues to demonstrate tape-out success at customer sites,” said Ihao Chen, President & CEO of Incentia. “We are pleased that our TimeCraft and DesignCraft delivered superior results and shortened the design cycle for ITE, a leading consumer electronics company”

Incentia Products
Incentia offers advanced complete timing and synthesis solutions to address the ever-growing design challenges in performance, runtime, and capacity for multi-million-gate, nanometer SoC designs.

TimeCraft is a full-chip, gate-level static timing analyzer (STA), offering fast analysis speed. Its rich features enable timing verifications at the pre-signoff (ECO iteration) stage and final signoff for all kinds of design applications. DesignCraft is a complete logic synthesis tool with integrated capabilities for optimizing area, power, timing and design-for-testability (DFT). It produces aggressive area reduction and low power results, with advantages in runtime and capacity. DesignCraft Pro� is a physical synthesis tool that accepts RTL or netlist designs and creates detailed placement. It offers fast turnaround time and allows users to perform physical performance prototyping and physical optimization as well as resolve design closure issues by simultaneously optimizing for timing, area, power, congestion and DFT.

About ITE
ITE is a professional fabless IC design house headquartered in Science Industrial Park, Hsinchu, with a sales office in Taipei. ITE is recognized as a leading global supplier of I/O chips and conducts business with leading PC manufacturers worldwide. ITE develops a variety of Intellectual Properties of all types for advanced ICs, and has developed diverse expertise in the areas of system S/W, H/W, and highly integrated technology; moreover, ITE works with leading corporations worldwide in strategic partnerships to expedite the development of new products. For more information, please visit

About Incentia
Incentia Design Systems, Inc. is a leading provider of advanced timing and synthesis software that addresses the stringent requirements of runtime, design capacity, timing, area, design-for-testability, power consumption and signal integrity for multi-million-gate semiconductor designs. The company’s products are in use at leading fabless IC design, systems, semiconductor and design service companies and have successfully been used to tape out numerous designs in different design applications, such as communications, networking, wireless, chip-sets, consumer electronics, and multi-media.

Incentia has offices in Santa Clara, California and Hsinchu Science Park, Taiwan, as well as distributors in Japan, China, Korea, India and Israel. For more information, please visit, email Email Contact or call 408-727-8988.


Press Contacts:
Georgia Marszalek, ValleyPR for Incentia, 650-345-7477, Email Contact
Angela Tsay / PR Manager, ITE, Tel: 886-2-2912 6889 ext. 6069, Email Contact

DesignCraft and TimeCraft are registered trademarks and DesignCraft Pro is a trademark of Incentia Design Systems, Inc. All other trademarks and tradenames are the property of their respective holders.

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy