Breker Verification Systems to Demonstrate TrekSoC SoC Verification Software, Synopsys' Verdi Advanced Debug Solution Link at Design Automation Conference

SAN JOSE, CA -- (Marketwired) -- May 28, 2014 --

WHO: Breker Verification Systems ( www.brekersystems.com), The System-on-Chip (SoC) Verification Company

WHAT: Will exhibit in Booth #2602 during the 51st Design Automation Conference (DAC). It will demonstrate a link between TrekSoC™, SoC verification software that automatically generates multi-threaded, self-verifying C test cases to run on an SoC's multiple heterogeneous embedded processors, and Synopsys' Verdi® solution, the industry leading, open debug platform.

WHEN: Monday, June 2, through Wednesday, June 4, from 9 a.m. until 6 p.m.

WHERE: Moscone Center, San Francisco

Additionally, the Breker booth will feature a demo highlighting the capabilities of TrekSoC-Si, a member of the TrekSoC family, on in-circuit emulation (ICE) platforms, field programmable gate array (FPGA) prototypes and production silicon.

Wolfgang Roesner from IBM, a Breker tool expert, will participate in the pavilion panel discussion "The Asymptote of Verification" June 2 from 5:15 p.m. until 6 p.m. in the Pavilion (Booth #313).

More information about Breker can be found at: www.brekersystems.com. To schedule a demonstration, go to www.brekersystems.com/dac.

The DAC website is located at: www.dac.com.

About Breker Verification Systems

Electronic Design Automation (EDA) software company Breker Verification Systems ( www.brekersystems.com) provides innovative solutions to solve the challenge of complex system-on-chip (SoC) functional verification and eliminate the pervasive "Stitch and Ship" SoC design approach. Its TrekSoC™ software and unique SoC scenario-modeling™ approach are used in production at leading semiconductor companies in the U.S., Europe and India. More information about Breker can be found at www.brekersystems.com or at http://tiny.cc/d5ifvw. Daily updates on company activities are available at http://tiny.cc/k6ifvw and additional information can be found at http://tiny.cc/56ifvw. Its blog, "The Breker Trekker," is hosted on EDACafe, available at http://tiny.cc/4cjfvw. Founded in 2003, it is privately held and funded. Breker Verification Systems corporate headquarters is located at 1879 Lundy Ave., Suite 126, San Jose, Calif. 95131 Telephone: (650) 336-8872. Email: Email Contact. Website: www.brekersystems.com.

TrekSoC, TrekSoC-Si, TrekBox and SoC Scenario Modeling are registered trademark of Breker Verification Systems. Breker Verification Systems acknowledges trademarks or registered trademarks of other organizations for their respective products.

For more information, contact:
Tom Anderson 
Breker Verification Systems 
(408) 823-9075 

Email Contact 

Nanette Collins
Public Relations for Breker Verification Systems
(617) 437-1822

Email Contact 





Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

True Circuits:

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Reverie: All That Glitters is not Past
More Editorial  
Jobs
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
Digital and FPGA Hardware Designer for Giga-tronics Incorporated at San Ramon, CA
FAE FIELD APPLICATIONS SAN DIEGO for EDA Careers at San Diego, CA
SoC Design Engineer for Intel at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Upcoming Events
European 3D Summit 2017 at 3, parvis Louis Néel 38054 Grenoble France - Jan 23 - 25, 2017
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy