AppliedMicro, ASSET collaborate on SourcePoint debugger to accelerate development of cloud applications based on X-Gene Server on a Chip solution

Richardson, TX, and Sunnyvale, CA (February 25, 2014) – ASSET® InterTech and Applied Micro Circuits Corporation (NASDAQ: AMCC), also known as AppliedMicro®, have collaborated on enabling ASSET’s software debug tools for AppliedMicro’s X-Gene™ Server on a ChipTM silicon solution, which is being rapidly deployed in enterprise systems in the cloud. ASSET (, through its ScanWorks® platform for embedded instruments, is the leading supplier of tools for embedded instrumentation.

X-Gene incorporates custom 64-bit ARMv8 processor cores to support a wide range of enterprise cloud applications such as web servers, data analytics, media streaming and others. The scalable multicore X-Gene SoC is a fully integrated server-on-a-chip solution with enterprise-class ARM cores, memory and input/output (I/O), including 10Gbps Ethernet, on the same chip, delivering industry-standard performance with a much lower cost of ownership.

“Without the right tools and significant visibility into concurrent code execution, debugging firmware for complex multicore SoCs is more than challenging,” said Larry Osborn, ASSET product manager for software debug and trace tools. “Because of the dependencies among multiple and concurrent firmware threads, isolating the root causes of bugs requires advanced debug and trace tools that will take into account all of the processing that’s going on in the system.”

The ASSET SourcePoint™ hardware-assisted debugger, which came to ASSET with its recent acquisition of Arium™, gives developers visibility into code execution from the point where the system is reset through the execution of the Unified Extensible Firmware Interface (UEFI). SourcePoint also runs under the Linux operating system and can take advantage of its many capabilities.

To serve a wide range of development needs, two ASSET run-control probes support the SourcePoint ARM debugger. The LC-500S and LX-1000 access ARM code executing on X-Gene processors via the chip’s JTAG port and apply many of the device’s internal resources to debug code. The LX-1000 Trace Port Analyzer includes the added capability over the LC-500S of storing collected trace data in two gigabytes of external storage.

“Developers of cloud applications based on the X-Gene are intent on bringing their systems to market as quickly as possible. Enterprise systems are rapidly moving to the cloud,” said Ed Gasiorowski, director of platform engineering at AppliedMicro. “With ASSET’s tools joining the ecosystem, our users will have powerful debug and trace tools that complement the processing capabilities of X-Gene.”

The SourcePoint debugger for designs based on X-Gene processors is available now from ASSET InterTech and its distributors. For product information, call 888-694-6250, fax 972-437-2826, e-mail Email Contact or visit

About ASSET InterTech

ASSET InterTech is a leading supplier to the electronics industry of tools based on embedded instrumentation. Its SourcePoint debugger and the ScanWorks platform for embedded instruments overcome the limitations of external test and measurement equipment by applying instrumentation embedded in code and semiconductors to debug and validate software and firmware, and to perform design validation and manufacturing test on chips and circuit boards. ASSET’s recent acquisition of Arium ( added a powerful suite of firmware debug and trace tools to the ScanWorks platform. Designers can quickly debug firmware and then diagnose how it interacts with hardware. ASSET InterTech is located at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.

About AppliedMicro

Applied Micro Circuits Corporation ( is a global leader in computing and connectivity solutions for next-generation cloud infrastructure and data centers. AppliedMicro delivers silicon solutions that dramatically lower total cost of ownership. Corporate headquarters are located in Sunnyvale, California. 



Follow ASSET on:








ASSET and ScanWorks are registered trademarks, and Arium and SourcePoint are trademarks of ASSET InterTech, Inc. Applied Micro Circuits Corporation, AppliedMicro, X-Gene, Server on a Chip, and Cloud Server are trademarks or registered trademarks of Applied Micro Circuits Corporation. ARM is a registered trademark of ARM Holdings plc. All other product or service names are the properties of their respective owners.


Read the complete story ...

Review Article Be the first to review this article
CST Webinar Series


Featured Video
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
SEMICON Europe at Grenoble France - Oct 25 - 27, 2016
ARM TechCon 2016 at Santa Clara Convention Center Santa Clara CA - Oct 25 - 27, 2016
Call For Proposals Now Open! at Santa Clara Convention Center, Santa Clara, CA California CA - Oct 25 - 27, 2016
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy