Celoxica Introduces High-Performance Evaluation Boards; RC300 and RC2000Pro Offer High Performance and Flexibility for Designers of Image Processing and Data Streaming Applications

ABINGDON, England—(BUSINESS WIRE)—March 9, 2004— Celoxica Limited today announced the availability of two new FPGA-based evaluation and prototyping boards - the RC300 and RC2000Pro. Both of these boards provide high performance FPGAs coupled with a wide range of features and options to offer designers of image processing and data streaming applications a new level of capability.

The RC300 package provides a desktop environment intended for evaluation and development of high-performance, high-throughput FPGA and soft-core microprocessor based applications such as robotics and industrial vision systems, video compression, video distribution, high-speed encrypted VPN, packet filtering and network intrusion detection.

To facilitate the use of the board for these types of applications, the package provides a 6M gate Xilinx Virtex II FPGA with direct access to four large banks of ZBT SRAM (totaling 32Mbytes) and a DIMM socket for customer-provided DRAM.

High-performance video, including stereoscopic video applications, is enabled by the dual video inputs and outputs, including both digital video to the DVI standard and analog video.

As an option, the board can be supplied with a high-resolution 1024x768 12.1-inch TFT/Touchscreen offering a quality and size of display unique in the industry and providing potential for sophisticated demonstrations of imaging applications such as in-car infotainment.

Communications are provided by dual gigabit Ethernet MAC/PHYs and 10/100/1000baseT sockets offering capability for data streaming, data distribution and high performance network applications. The board also offers a USB 2.0 connection for high-speed bit file download and for host to FPGA application communications.

To assist with debug, application status reporting and user interaction, the board has 8 user-programmable LEDs and a four-line, 16 character LCD display as well as audio in/out, including SPDIF digital out, PS2 keyboard and mouse connectors and dual RS232 ports.

The RC2000-Pro package provides an environment for the development of high-performance FPGA / Hard-core processor based SOC applications particularly in the area of image processing. The package is composed of a high performance FPGA development environment and supporting software including platform abstraction layer (PAL) and data stream manager (DSM) support, allowing rapid development of platform-independent Handel-C applications using the Celoxica DK Design Suite.

The hardware is based on a PCI mezzanine card (PMC) featuring either a XC2VP70 or XC2VP100 Xilinx Virtex-II Pro Platform FPGA. The PMC card also provides a high speed PCI interface, DDR SSRAM and DDR SDRAM external memory, programmable clocks, temperature monitoring, battery backed encryption and flash boot facilities. The PMC card can be adapted to customer requirements by fitting an optional daughter module offering a range of I/O and/or additional memory configurations.

For use in a standard PC/PCI environment, the PMC card is supported by a dual PMC to PCI carrier card providing 64-bit 66MHz primary and secondary PCI via an Intel 21154 PCI-PCI bridge device. PMC Pn4 user I/O connections can be routed between the PMC sites or can be connected to an on-board I/O connector. The PMC card can also be used in a CompactPCI environment through the use of a dual PMC to CPCI carrier card.

Pricing and Availability

The RC300 will be available later this month (March 2004) with prices starting at $12,500 including power supply and supporting software for Windows 2000 and Windows XP platforms. The RC2000Pro range is now available with boards starting at $15,000 including supporting software for Windows 2000 and Windows XP. Celoxica also offers the DK Design Suite and other software products supporting the Software-Compiled System Design methodology as well as a broad range of design services and other off-the-shelf FPGA prototyping cards.

About Celoxica

An innovator in system-level electronic design automation (EDA), Celoxica supplies the design technology, IP and services that define Software-Compiled System Design, a methodology that exploits higher levels of design abstraction to dramatically improve silicon design productivity. Celoxica's products address hardware/software partitioning, co-verification and C-based synthesis to reconfigurable hardware. Established in 1996, Celoxica offers a proven route from complex software algorithms to hardware, and provides an ideal design environment for System FPGA with significant productivity advantages for digital signal processing applications such as imaging, electronic security and communications. For more information, visit: www.celoxica.com.

Celoxica, Handel-C and the Celoxica logo are trademarks of Celoxica, Ltd. All other brand names and product names are the property of their respective owners.

Celoxica Ltd.
Jeff Jussel, 408-626-9070

Email Contact
VitalCom Marketing & PR
Karen Tyrrell, 650-366-8212 x204

Email Contact
Neesham PR
Allan Edwards, +44-1442-879-222

Email Contact

Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Aldec Simulator Evaluate Now

Featured Video
DSP Tools Engineer for Cirrus Logic, Inc. at Austin, TX
Acoustic Systems Test Engineer for Cirrus Logic, Inc. at Austin, TX
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
Design Verification Engineer for Cirrus Logic, Inc. at Austin, TX
Upcoming Events
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
IPC APEX EXPO 2018 at San Diego Convention Center San Diego CA - Feb 24 - 1, 2018
CST: Webinar series

Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise