Mentor Graphics Introduces the Eldo Premier Simulator

WILSONVILLE, Ore. — (BUSINESS WIRE) — April 12, 2011Mentor Graphics Corp. (NASDAQ: MENT) today introduced the Eldo® Premier tool, one of the industry’s fastest SPICE simulation solutions. The Eldo Premier tool offers full SPICE accuracy and up to 20X higher performance and 10X better capacity over traditional SPICE. The Eldo Premier tool targets applications requiring CPU-intensive transient simulations, such as TFT panels, PLLs and DLLs, frequency synthesizers, delta-sigma converters, ADC/DAC audio and video converters, automotive circuits, DC-DC converters, regulators, power management circuits, and memory-critical path analysis.

The Eldo Premier tool accelerates the simulation of large circuits for both pre- and post-layout through the use of proprietary, advanced resolution techniques. The acceleration of single-thread simulation is achieved by applying unique algebraic techniques for the resolution of non-linear differential equations. Multi-threaded simulations accomplish their impressive performance increase through the natively parallel design of the new simulation kernel.

The result for customers is that critically important simulations formerly requiring simulation times measured in days or weeks are now being accomplished in hours and days.

VIA Technologies, Inc., a leading fabless supplier of media-rich x86 processor platform silicon for the PC and embedded industries, has already reaped benefits from using Eldo Premier. “In the business of silicon-level innovation, development time is critical,” said Steven Liu, special assistant of the Multimedia and Consumer Electronics Division, VIA Technologies, Inc. “We evaluated Eldo Premier on a 40nm process using a PLL as the evaluation circuit and achieved a 4X speed improvement compared to Eldo Classic.”

“Our customers find that the capabilities of the Eldo Premier tool dramatically increase the productivity of their design team while simultaneously improving quality,” said Robert Hum, vice president and general manager of the Deep Submicron Division of Mentor Graphics. “The Eldo Premier tool’s impressive raw simulation power allows users to run many more corners, and to aggressively attack problem areas such as an entire temperature range or a complete power-supply range instead of just the nominal point of the specifications.”

For users familiar with the Eldo Classic simulator, the Eldo Premier tool offers the same familiar use model. The Eldo Classic tool commands are used to plot and/or probe signals, and the Eldo Premier tool produces the usual output files and post-processing scripts written for the Eldo Classic tool that can be re-used without modification.

The Eldo Premier tool is available today and will also support the Questa® ADMS product for mixed-signal verification in the near future including support of VHDL/Verilog and VHDL-AMS/Verilog-AMS descriptions.

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues over the last 12 months of about $915 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Eldo and Questa are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)



Contact:

Mentor Graphics
Carole Dunn, 503-685-4716
Email Contact
or
Ry Schwark, 503-685-1660
Email Contact




Review Article Be the first to review this article
Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Job Openings: Can EDA Predict the Future
More Editorial  
Jobs
Engr, Elec Des 2 for KLA-Tencor at Milpitas, CA
Test Development Engineer(Job Number: 17001697) for Global Foundaries at Santa Clara, CA
Timing Design Engineer(Job Number: 17001757) for Global Foundaries at Santa Clara, CA
ASIC Design Engineer 2 for Ambarella at Santa Clara, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Senior FPGA Designer for Fidus Electronic Product Development at Fremont, CA
Upcoming Events
CDNLive Silicon Valley 2017 at Santa Clara Convention Center Santa Clara CA - Apr 11 - 12, 2017
10th Anniversary of Cyber-Physical Systems Week at Pittsburgh, PA, USA PA - Apr 18 - 21, 2017
DVCon 2017 China, April 19, 2017, Parkyard Hotel Shanghai, China at Parkyard Hotel Shanghai Shanghai China - Apr 19, 2017
Zuken Innovation World 2017 at Hilton Head Marriott Resort & Spa Hilton Head Island NC - Apr 24 - 26, 2017
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy