Carbon Releases Solution for AMBA TLM-2.0 Modeling

ACTON, MA -- (MARKET WIRE) -- Feb 17, 2011 -- Carbon Design Systems™, the leading supplier of tools for the automatic creation, validation and deployment of system-level models, today unveiled a TLM-2.0 solution for the AMBA™ protocol to enable modeling the widely adopted AMBA® protocols with SystemC TLM2-0.

Available from Carbon's IP Exchange at no charge, the software contains definitions and extensions for AMBA 3 AXI3™, AHB™, AHB-Lite™ and APB™ protocols at the loosely timed, approximately timed and cycle-timed levels of abstraction. Adapters are provided to bridge between abstraction levels and to connect directly to the AMBA Programmer's View (PV) interface used by ARM's Fast Models.

"Many designers encounter compatibility problems when attempting to reuse TLM-2.0 models for the AMBA protocol from other companies or even within their own company," comments Bill Neifert, chief technology officer (CTO) at Carbon Design Systems. "The market has needed an accessible, non-proprietary solution that provides a set of definitions for TLM-2.0 for AMBA to run in any SystemC environment. With this solution, Carbon's continues to deliver tools to ease the process of virtual platform model reuse for all designers using AMBA protocols, regardless of their EDA vendor."

"Our integrations of complex System-On-Chip ICs that include the AMBA protocol and other protocols, exploit TLM based SystemC virtual platforms," says Alain Clouard, manager of System Platforms Group, Home Entertainment and Displays, STMicroelectronics. "We welcome protocol owners, such as ARM, teaming with partners to define SystemC representation of their protocols. Model suppliers adopting a unique and TLM-based cycle-accurate (CA) definition of the AMBA protocol, is making it easier for IP users to integrate, where needed, various CA models for AMBA, such as 'Carbonized' IP models, in higher-level simulation platforms such as ST's TLM_TAC virtual SoC. Enabling the communication of such CA model with higher-level TLM AT or TLM LT models in this virtual SoC, is facilitated by the common base TLM standard."

About the Package
The TLM-2.0 for the AMBA protocol solution will execute in any SystemC environment and contains no runtime licensing. Using the source, examples and documentation provided in the kit, designers can create models representing AMBA intellectual property (IP) blocks at any level of abstraction.

To ensure compatibility with ARM's Fast Models, Carbon has teamed with ARM to include the PV definitions for AMBA used by the Fast Models' TLM-2.0 interface as part of the kit.

"ARM is pleased to support efforts to create virtual models of AMBA protocol IP and have provided our PV SystemC/TLM-2.0 compliant interface to this effort to help ensure seamless interaction with our widely adopted Fast Models," remarks Tony Smith, product manager, Fast Models at ARM.

The TLM-2.0 for the AMBA protocol solution is available for immediate download from Carbon's IP Exchange web portal located at: To access the tool, select "Free Downloads" from the IP Categories menu.

About Carbon Design Systems
Carbon Design Systems connects hardware and software teams with a unified virtual platform that offers 100% accuracy for architectural analysis and performance analysis, and hundreds of MIPs performance for pre-silicon firmware and software development. Solutions are based on open industry standards, including SystemC, IP-XACT, Verilog, VHDL, OSCI TLM, MDI, SCML, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on wireless, networking, and consumer electronics. Carbon is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone: (978) 264-7300. Facsimile: (978) 264-9990. Email: Email Contact. Website:

ARM and AMBA are registered trademarks of ARM Limited. Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

For more information, contact:
Bill Neifert 
Vice President of Business Development 
Carbon Design Systems 
(978) 264-7302 

Email Contact   

Review Article Be the first to review this article

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Technical Support Engineer for EDA Careers at Freemont, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy