Synopsys' Silicon-Proven DesignWare HDMI 1.4a Tx Controller and PHY IP Receive HDMI Certification

Support for 3D and HDMI Ethernet Audio Return Channel Formats Enable Designers to Incorporate Advanced Features into Multimedia SoCs

MOUNTAIN VIEW, Calif., Oct. 28 — (PRNewswire) — Synopsys, Inc. (Nasdaq: SNPS), a world leader in software and IP for semiconductor design, verification and manufacturing, today announced that Synopsys' DesignWare® High-Definition Multimedia Interface™ (HDMI™) 1.4a Transmitter (Tx) digital controller and PHY IP solutions in the 40-nanometer (nm) process node have achieved certification from an HDMI Authorized Training Center (ATC).  The DesignWare HDMI PHY IP achieved HDMI 1.4a compliance by passing all process, voltage and temperature variation tests, which are key certification requirements for environmental robustness. Synopsys' fully compliant HDMI 1.4a Tx solution is now available in more than 10 process technologies, ranging from 90-nm to 40-nm. With support for the latest HDMI 1.4a specification features such as all eight 3D formats, HDMI Ethernet and Audio Return Channel (HEAC) and real-time content signaling, the DesignWare HDMI 1.4a Tx controller and PHY IP enable system-on-chip (SoC) designers and device manufacturers to quickly incorporate advanced functionality into their multimedia source applications with less risk and improved time-to-market.

The DesignWare HDMI 1.4a Tx IP solution includes a comprehensive set of IP deliverables such as baseline software drivers for system development, which help designers quickly embed this complex interface into next-generation multimedia SoCs. It also includes many performance features designers need to create a state-of-the-art viewing experience, including:

  • Support for all eight 3D formats, such as side-by-side (full and half) and frame/line/field alternative, providing extended flexibility for system designers.
  • An integrated HEAC block simplifies the connectivity between internet-enabled digital home devices by enabling the transfer of Ethernet and audio frames through a single HDMI cable
  • Real-time content signaling capability enables televisions to automatically optimize the picture setting with no user intervention
  • Support for 4K x 2K resolution delivers up to four times the resolution of 1080p (Quad HD technology), providing the same resolution as state-of-the-art digital cinema

"We tested Synopsys' DesignWare HDMI 1.4 IP against the stringent physical layer requirements of the HDMI specification and found that it passes with outstanding margin. This demonstrates Synopsys' deep understanding of the HDMI specification," said Quintin Anderson, Chief Operating Officer of Granite River Labs. "Pre-compliance testing gives adopters confidence that their product will pass official compliance testing the first time, avoiding costly product delays and re-testing expenses. Passing compliance gives designers added confidence that the IP is robust and interoperable with existing HDMI products while providing support for the latest functionalities such as HEAC and 3D formatting."

"HDMI is enabled in more than 1.5 billion consumer devices and is now gaining significant traction in delivering 3D functionality in digital home theater systems, gaming consoles and other portable multimedia devices," said John Koeter, Vice President of Marketing for the Solutions Group at Synopsys. "Synopsys' high-quality, silicon-proven DesignWare HDMI 1.4a IP solution is optimized for small area, low power and high performance, enabling designers to quickly incorporate the latest functionality with less risk."

Availability

The DesignWare HDMI 1.4a Tx digital controller and PHY IP solution is available now for 90-nm to 40-nm process nodes. For more information please visit: http://www.synopsys.com/hdmi.

About DesignWare IP

Synopsys is a leading provider of high-quality, silicon-proven IP solutions for SoC designs. The broad DesignWare® IP portfolio includes complete interface IP solutions consisting of controllers, PHY and Verification IP for widely used protocols, analog IP, embedded memories, logic libraries and configurable processor cores.  In addition, Synopsys offers SystemC transaction-level models to build virtual prototypes for rapid, pre-silicon development of software. With a robust IP development methodology, reuse tools, extensive investment in quality and comprehensive technical support, Synopsys enables designers to accelerate time-to-market and reduce integration risk. For more information on DesignWare IP, visit: http://www.synopsys.com/designware. Follow us on Twitter at http://twitter.com/designware_ip.

About Synopsys

Synopsys, Inc. (Nasdaq: SNPS) is a world leader in electronic design automation (EDA), supplying the global electronics market with the software, intellectual property (IP) and services used in semiconductor design, verification and manufacturing. Synopsys' comprehensive, integrated portfolio of implementation, verification, IP, manufacturing and field-programmable gate array (FPGA) solutions helps address the key challenges designers and manufacturers face today, such as power and yield management, system-to-silicon verification and time-to-results. These technology-leading solutions help give Synopsys customers a competitive edge in bringing the best products to market quickly while reducing costs and schedule risk. Synopsys is headquartered in Mountain View, California, and has approximately 70 offices located throughout North America, Europe, Japan, Asia and India. Visit Synopsys online at http://www.synopsys.com/.

Synopsys and DesignWare are registered trademarks of Synopsys, Inc. Any other trademarks or registered trademarks mentioned in this release are the intellectual property of their respective owners.

Editorial Contact:


Sheryl Gulizia

Synopsys, Inc.

650-584-8635

Email Contact


Stephen Brennan

MCA, Inc.

650-968-8900 x114

Email Contact



SOURCE Synopsys, Inc.

Contact:
Synopsys, Inc.
Sheryl Gulizia of Synopsys, Inc.
Phone: +1-650-584-8635
Email Contact
Stephen Brennan of MCA, Inc.
Phone: +1-650-968-8900, ext. 114
Email Contact for Synopsys, Inc.
Web: http://www.synopsys.com




Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
Technical Support Engineer for EDA Careers at Freemont, CA
Staff Software Engineer - (170059) for brocade at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
Verific: SystemVerilog & VHDL Parsers
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy