STMicroelectronics' MEMS Microphone Makes Conversations Crystal-Clear

Superior sound quality and robustness at unbeatable cost lays the foundation for the boom of micro-machined microphones

GENEVA, Sept. 9 — (PRNewswire) — STMicroelectronics (NYSE: STM), the leading supplier of MEMS for consumer and portable applications(i), has introduced a high-performance, low-power stereo microphone that throws down the gauntlet in sound quality and reliability at reduced size and cost. ST's innovative MEMS microphone targets existing and emerging audio applications across a range of market segments, including cell phones, portable media players, games, digital cameras, security systems, learning devices and hearing aids, where small size and high sound quality, reliability and affordability are critical.

ST's MP45DT01 digital-output stereo microphone enables dramatic advancements in sound quality by providing omni-directional sensitivity to detect and filter out background noise. Ever more important with the increasing use of audio-input devices in noisy and uncontrollable environments, sound quality can be further improved by incorporating multiple microphones in one device. Such microphone arrays are made possible with the small form factor and the superior characteristics of ST's MEMS microphones.

Leveraging established high-volume silicon manufacturing processes, MEMS microphones meet price points set by the traditional electret condenser microphones (ECM)(ii), while boasting superior reliability and robustness. ST's new microphone uses sensor technology from OMRON(iii) that is inherently less susceptible to mechanical vibration, temperature variations and electromagnetic interference. These features are vitally important in cell phones and other devices with an audio input.

ST's industry-unique capability to manage the whole supply chain and leading-edge MEMS production capacity enables short product-development cycles and time-to-volume for high-performance, cost-competitive silicon acoustic devices. As it did in the consumer markets for accelerometers, this combination of benefits will accelerate the growth of the MEMS microphone market by promoting the development of new application areas such as voice-enabled gaming, automotive voice systems, acoustic sensors for industry and security applications, and medical telemetry.

According to iSuppli's research, dated September 2009, the market for micro-machined acoustic devices for consumer electronics and mobile handsets is forecast to grow revenue at a CAGR of 18% between 2008 and 2013, when the number of units shipped should exceed one billion parts per year.

Samples of ST's MP45DT01 MEMS microphone are available and volume production is starting now. Unit pricing is $1 for volumes in the range of 10,000 pieces. For further information on ST's complete MEMS portfolio see

About STMicroelectronics

STMicroelectronics is a global leader serving customers across the spectrum of electronics applications with innovative semiconductor solutions. ST aims to be the undisputed leader in multimedia convergence and power applications leveraging its vast array of technologies, design expertise and combination of intellectual property portfolio, strategic partnerships and manufacturing strength. In 2009, the Company's net revenues were $8.51 billion. Further information on ST can be found at

(i) iSuppli, December 2009

(ii) Electret Condenser Microphone (ECM) is a common type of microphone (acoustic-wave to electric-current converter) in which sound waves cause a charged diaphragm to vibrate. The diaphragm is one plate of a parallel-plate capacitor and its vibration produces changes in the voltage across the plates, creating an electric signal that can be stored for manipulation and conversion back into an acoustic wave. This acoustic wave approximates the input sound, depending upon the quality of the microphone, the kind of manipulation done to the electronic signal, and the loudspeaker through which it is played.

(iii) OMRON is a strong player in MEMS sensor technology with over twenty years of research, development and manufacturing experience in the healthcare and industrial markets. Headquartered in Kyoto, Japan, OMRON Corporation has over 35,000 employees in 38 countries working to provide products and services to customers in a variety of fields, including industrial automation, electronic components, social systems (ticket gate machines, ticket vending machines and traffic control) and healthcare. For more information, visit OMRON's website at

SOURCE STMicroelectronics

Michael Markowitz of STMicroelectronics
Phone: +1-781-591-0354
Email Contact

Review Article Be the first to review this article
CST: Webinar Feb 16, 2017


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Synopsys: Is 40 the new 20?
More Editorial  
Development Engineer-WEB SKILLS +++ for EDA Careers at North Valley, CA
SoC Design Engineer for Intel at Santa Clara, CA
Technical Marketing Manager Valley for EDA Careers at San Jose, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Senior Physical Design Engineer for Ambiq Micro at Austin, TX
Upcoming Events
3D Printing Electronics Conference at High Tech Campus 1, 5656 Eindhoven Eindhoven Netherlands - Jan 24, 2017
DesignCon 2017 at Santa Clara Convention Center Santa Clara CA - Jan 31 - 2, 2017
Embedded Neural Network Summit at San Jose CA - Feb 1, 2017
International Solid-State Circuits Conference (ISSCC) at San Francisco CA - Feb 5 - 9, 2017
CST: Webinars Begin on February 9

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy