The State of IP

Analysis & Comments by the EDA WEEKLY writer:

This quarterly Synopsys supplement is made available only for one quarter, and then it's replaced by the next quarter's supplement. Upon request, however, Yvette was able to supply the writer of this EDA WEEKLY with some additional data starting in 2006. These data are summarized here (keeping in mind that Synopsys' fiscal years terminate at the end of October each year):

Table 6A Synopsys IP & Systems revenue ($ millions) as a percent of total

Comment #1: Note from Table 6A that "IP & Systems" revenue recognized by Synopsys has increased steadiy as a percent of total Synopsys revenue through each the full years reported, from 7.84% of total revenue in FY 2006 to 10.65% in Fiscal 2009, and it is averaging 13.30% of Synopsys actual revenue through three quarters of FY 2010.

Comment #2: Among the four segments into which Synopsys has chosen to split its total revenue for supplementary reporting purposes, the revenue from the "IP & Systems" segment has reached and eclipsed the "Manufacturuing" segment in total revenue for the first three quarters of FY 2010, to become the second highest revenue producer next to the traditional leader -- the Synopsys "Core EDA" segment:

Table 6B Synopsys Four Product Segments (cumulative FY 2010 revenue in $ millions)

Comment #3: Revenue recognition in FY 2010 Q4 from recent IP acquisitions, such as Virage Logic, is likely to increase the full 2010 fiscal year revenue number percentage for "IP & Systems" faster than it increases total Synopsys revenue, which may mean an even higher YE percentage of "IP & Systems" revenue as a percent of total Synopsys revenue than 13.30% for the full FY 2010.

Comment #4: While the supplemental Product Segments revenue reports are both welcome and extremely useful, one immediately craves the corresponding earnings data, which remain unreported in Synopsys' supplements just as they are unreported in EDAC quarterly new releases. One may also desire further segmentation into the inidividual product by product contents of each of the four Product Segments chosen by Synopsys for both revenue and profitability. It would also be useful to see these data for Synopsys' fiscal years earlier than 2006 as well.

Comment #5: The writer would welcome similar reported data from Cadence & Mentor Graphics, and if the data already exist, the writer would appreciate directions on where to them.

Again, great thanks to Synopsys' Yvette Huygen Deshpande for her readership, interest and action in supplying the available Synopsys data used in the foregoing.



The writer would like to acknowledge the sources of data and information for this EDA WEEKLY of August 16, 2010: Vendor News Releases; Hoover's; Yahoo! Finance; Google Finance; and Wikipedia. Ongoing support by the team at IBSystems, Inc., including but not limited to Sanjay Gangal, Adam Heller, David Heller, Jon Heller, Nitai Fraenkel, and Sumit Singhal, is also appreciated.


About the Author of this August 16, 2010 EDA WEEKLY article:

Since 1996, Dr. Russ Henke has been and remains active as president of HENKE ASSOCIATES, a San Francisco Bay Area high-tech business & management consulting firm. The number of client companies for Henke Associates now numbers more than forty. During his corporate career, Henke operated sequentially on "both sides" of MCAE/MCAD and EDA, as a user and as a vendor. He's a veteran corporate executive from Cincinnati Milacron, SDRC, Schlumberger Applicon, Gould Electronics, ATP, and Mentor Graphics. Henke is a Fellow of the Society of Manufacturing Engineers (SME) and served on the SME International Board of Directors. Henke was also a board member of SDRC, PDA, ATP, and the MacNeal Schwendler Corporation, and he currently serves on the board of Stottler Henke Associates, Inc. Henke is also a member of the IEEE and a Life Fellow of ASME International. In April 2006, Dr. Henke received the 2006 Lifetime Achievement Award from the CAD Society, presented by CAD Society president Jeff Rowe at COFES2006 in Scottsdale, AZ. In February 2007, Henke became affiliated with Cyon Research's select group of experts on business and technology issues as a Senior Analyst. This Cyon Research connection aids and supplements Henke's ongoing, independent consulting practice (HENKE ASSOCIATES).

Dr. Henke is also a contributing editor of the EDACafé.com EDA WEEKLY, and he has published ten (10) monthly EDA WEEKLY articles since November 2009; URL's available.

To obtain details of the new
"2010 Business Planning Tool Kit Promotion"
please click on the URL below and scroll to the last entry on that page:

Since May 2003 HENKE ASSOCIATES has now published a total of ninety (90) independent COMMENTARY articles on MCAD, PLM, EDA and Electronics IP on IBSystems' MCADCafé and EDACafé. The 91st Commentary will cover the G5 IP vendors for Q2 2010, and it is intended to be posted on August 16, 2010 simultaneously with the above EDA WEEKLY.. Further information on HENKE ASSOCIATES, and URL's for past Commentaries, are available at . March 31, 2010 marked the 14th Anniversary of the founding of HENKE ASSOCIATES.

« Previous Page 1 | 2 | 3 | 4 | 5 | 6             


Review Article Be the first to review this article


Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Acquiring Mentor: Four Good Ideas, One Great
More Editorial  
Manager, Field Applications Engineering for Real Intent at Sunnyvale, CA
Upcoming Events
DeviceWerx - 2016 at Green Valley Ranch Casino & Resort Las Vegas NV - Nov 3 - 4, 2016
2016 International Conference On Computer Aided Design at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
ICCAD 2016, Nov 7-10, 2016 at Doubletree Hotel in Austin, TX at Doubletree Hotel Austin TX - Nov 7 - 10, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy