Carbon's ARM Mali Models Selected as Embedded Computing Design Editor's Choice

ACTON, MA -- (MARKET WIRE) -- May 11, 2010 -- Carbon Design Systems™ announced today that its models for ARM® Mali™ Graphic Processor Units (GPUs) were chosen as an Editor's Choice product by Embedded Computing Design Magazine for the April issue.

"Congratulations to the Carbon Design Systems team for offering models that give designers better tools to work with," says Don Dingee, editorial director for Embedded Computing Design and OpenSystems Media. "Carbon's ARM Mali models allow design teams the flexibility to explore architectural options, create SoC firmware and quickly develop application software easily."

These models, introduced in March, include the Mali-200 and Mali-400MP. They are compiled directly from ARM register transfer level (RTL) code and are 100% implementation accurate.

Each contains transaction level model (TLM)-2.0 interfaces to execute seamlessly with Fast Models from ARM as part of a system prototype and quickly boot an operating system such as Linux or Android. The interface and dynamic clock generation logic automatically turn the model on when it is being used and off when it is dormant. Consequently, the models run in a loosely timed (LT) level environment without slowing it down, except when they're active, enabling the same model to be used for architectural exploration, firmware development and application software development.

Mali models also contain a cycle-accurate TLM interface and integrate directly into Carbon SoC Designer Plus and any SystemC or RTL design environment.

"Carbon is pleased that our Mali models were selected by the Embedded Computing Design as an Editor's Choice," remarks Bill Neifert, Carbon's chief technology officer and founder. "This recognition of the Carbon design team reinforces our commitment to deliver best-in-class tools for the automatic creation, validation and deployment of system-level models."

About OpenSystems Media
OpenSystems Media has been a leading publisher of electronics magazines, e-mail newsletters, websites and product resource guides for more than 20 years. OpenSystems Media offers E-casts and Techcasts for engineers and provides interactive tools where engineers can communicate directly with presenters and top industry editors. Current publications include: CompactPCI and AdvancedTCA Systems, DSP-FPGA.com, Embedded Computing Design, Industrial Embedded Systems, Military Embedded Systems, PC/104 and Small Form Factors, and VME and Critical Systems. For more information, visit www.opensystemsmedia.com.

About Carbon Design Systems
Carbon Design Systems offers the leading system validation solution for complex system-on-chip (SoC) designs. Target applications range from model generation and deployment to virtual platform creation, execution, and analysis. Carbon provides 100% implementation accuracy on the critical components required for accurate architectural analysis and pre-silicon hardware/software validation. Solutions are based on open industry standards, including SystemC, IP-XACT, Verilog, VHDL, OSCI TLM, MDI, SCML, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on wireless, networking and consumer electronics. Carbon is headquartered at 125 Nagog Park, Acton, Mass. , 01720. Telephone: (978) 264-7300. Facsimile: (978) 264-9990. Email: Email Contact. Website: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

For more information, contact:
Bill Neifert
Vice President of Business Development
Carbon Design Systems
(978) 264-7302

Email Contact 





Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
2017 IoT Developers Conference at Santa Clara Convention Center California - Apr 26 - 27, 2017
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy