GRID Simulation Technology Announces SimCHECK™ for Sign-off Qualification and EMIR Verification of Complex IC Designs

San Jose , CA and Tokyo , Japan - May 5th, 2010

GRID Simulation Technology today announced SimCHECK, a qualification tool for verifying the accuracy of the Electromigration and IR drop (EMIR) simulation results of complex networks such as power grids, signal and clock nets, and silicon substrates in IP Blocks, and SoCs.

Today’s  generation of low power SoCs manufactured at advanced process nodes are challenged by competing and often conflicting electrical design requirements; high computational functions, low power operating budgets, and increasingly higher frequencies. ICs designed to meet these requirements are susceptible to transient noise effects due to the high density of the transistors and miles of interconnect wiring. Unseen variations in IR voltage drop can have dramatic impacts on product yields in terms of leakage, performance, and reliability.  Qualified, SPICE accurate, EMIR analysis is now a critical mandate for verification and sign-off of functionality, timing, and reliability of these designs.

Mitigating Risk from Inconsistent EMIR Simulation Results

Current generation EMIR analysis tools suffer from limitations in speed, capacity, and accuracy when analyzing large IP blocks and complex SoCs. To handle these ‘oversized’ problems, EMIR simulators often employ reduction methods to simplify the size of the networks being analyzed. While these methods are effective in reducing runtimes, they immediately create unknown sources of loss of accuracy in simulation, and the loss of traceability between simulation results and the original circuit under evaluation.  Unfortunately, there has been no “Golden Numeric” reference to identify and quantify where tradeoffs are made. To ensure manufacturability of designs, a consistent Quality of Result (QoR) from EMIR simulation is necessary to verify if any trade-offs made are acceptable; and to understand any introduced sources of error.

SimCHECK Ensures No Compromises in EMIR Analysis Accuracy

SimCHECK provides today’s designer a rigorous method to designers to numerically account for all EMIR impacts on their designs and verify the results from any EMIR simulator utilizing Kirchhoff’s Voltage Law (KVL), Kirchhoff’s Current Law  (KCL), and Power Conservation Law.

SimCHECK automatically identifies and maps non-compliant values to the exact XY location on the physical netlist and easily integrates with popular EDA tools utilizing standard industry formats.

“SimCHECK is very helpful to ensure the quality of result of IP design blocks and the entire IC design,” said Mitsuo Saito, Senior Fellow and VP of Engineering, Toshiba Semiconductor.  “Numeric verification of IR voltage drop and electro-migration analysis is a necessary step to verify Quality of Results, total power consumption, and the manufacturability of designs when using multiple simulation tools.” 

“SimCHECK reads, qualifies, traces, and report all simulation accuracy errors for any complex network,” said Wai-Yan Ho, CEO of GRID Simulation Technology.  “Finally, CAD teams and designers now have a network analysis with no compromises to qualify the results of any simulator and reduction method.  With SimCHECK as a new golden reference tool, we expect design teams will use the benefits of better analysis to create higher performance designs with greater reliability and fewer failures.”

About GRID Simulation Technology

GRID Simulation Technology, Inc. is a Silicon Valley-based Electronic Design Automation (EDA) company dedicated to solving the world's largest and most complex electronics problems at true SPICE-accuracy through its revolutionary new analysis technology.

The company's flagship products, NanoRAIL and SimCHECK, provide analysis of IC power grid problems including IR voltage drop and electro-migration (EM), and the qualification of complex power network analysis results.

The company is a privately held California Corporation headquartered in Morgan Hill , CA with offices located in: Los Angeles , CA ; East Fishkill, NY; and Tokyo , Japan .

For More Information Contact:

info@gridsimtech.com

 GRID Simulation Technology, Inc.

1295 East Dunne Avenue, Suite 215 Morgan Hill , CA 95037

http://www.gridsimtech.com

SimCHECK™ is a trademark of GRID Simulation Technology, Inc.




Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy