3D Integration Breakthrough -- ALLVIA Integrates Embedded Capacitors for Silicon Interposers and 3D Stacked Semiconductors

SUNNYVALE, CA -- (MARKET WIRE) -- Feb 23, 2010 -- ALLVIA, the first through-silicon via (TSV) foundry, has integrated embedded capacitors on Silicon Interposers, a key interface between a silicon device and an organic substrate needed for managing high interconnect densities. Capacitance values higher than 1,500 nF/cm2 have been achieved for the embedded capacitors developed for delivering power to the devices. 3D integration with ALLVIA's through-silicon via technology allows much closer access to high value capacitors than previously possible, leading to a much higher level of electrical performance.

Thin film capacitors

Thin film capacitors without TSVs have been used previously. However, with the interconnect inductance being high, benefits of thin film capacitors have not been fully realized. TSV interposers with embedded capacitors provide the shortest electrical path between devices and power supply decoupling capacitors. TSVs with their very low inductance interconnects thus will enable very high electrical performance when integrated with embedded thin film capacitors.

ALLVIA's silicon TSV interposers enable interconnect pitch matching between a high-density IC chip and an organic or a ceramic substrate. Further, they provide a very low stress interconnect to Si ICs that use low-k dielectrics. These benefits make ALLVIA's interposers an attractive solution for advanced packaging of next generation logic devices.

"The capacitance value of 15 nanofarads per millimeter square is not a limit of our process and we think that the integration of capacitors with TSVs and silicon interposers is a technological breakthrough. The capacitance from the die or package can now be transferred to the interposer," commented Sergey Savastiouk, CEO of ALLVIA.

Silicon Interposers

In January, ALLVIA announced that it had completed the integration of a silicon interposer between a semiconductor die and an organic or ceramic substrate and had completed reliability testing. This 3D integration of substrates is made possible with ALLVIA's through-silicon vias. Samples and reliability data are being made available to interested customers.

About ALLVIA

Located in Silicon Valley, ALLVIA is the first through-silicon via (TSV) foundry and introduced the term "through-silicon via" in both a 1997 business plan and a January 2000 technical article. With the full spectrum of facilities, IP and equipment, ALLVIA offers services for prototyping and full volume production of both front side and back side TSVs to the MEMS and semiconductor industries as well as silicon etching, copper plating, photolithography, CMP, etc. www.allvia.com

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=1182949

Company Contact:
ALLVIA, Inc.
657 N. Pastoria Ave.
Sunnyvale, CA 94085 USA
ph.: 408-720-3333

Email Contact

Agency Contact:
Bruce Kirkpatrick

Email Contact
925.244.9100





Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Synopsys: Custom Compiler

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Teklatech: Work smart, Not hard
More Editorial  
Jobs
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Upcoming Events
ARM TechCon 2017 at Santa Clara Convention Center Santa Clara CA - Oct 24 - 26, 2017
MIPI DevCon Bangalore 2017 at The Leela Palace Bengaluru India - Oct 27, 2017
The 2017 International Test Conference at Fort Worth Convention Center Fort Worth TX - Oct 31 - 2, 2017
MIPI DevCon Hsinchu City 2017 at Sheraton Hsinchu Hotel Taiwan - Oct 31, 2017
CST: Webinar series
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise