IDT Introduces Precision Temperature Sensors for DDR3 Memory Modules

New Devices Enhance Reliability, Performance and Power Efficiency of Enterprise, Mobile and Embedded Computing Systems

SAN JOSE, Calif. — (BUSINESS WIRE) — January 25, 2010IDT® (Integrated Device Technology, Inc.) (NASDAQ: IDTI), a leading provider of essential mixed signal semiconductor solutions that enrich the digital media experience, today announces its first precision temperature sensors targeted at Double Data Rate 2 and 3 (DDR2 and DDR3) memory modules, Solid State Disks (SSD) and computing motherboards. These new devices allow enterprise, mobile and embedded computing systems to run at peak efficiency, saving overall power and enhancing reliability and performance by monitoring the temperature of the various subsystems.

The new IDT temperature sensors measure the local temperature of a computing subsystem and, if the temperature rises above pre-determined levels, enable system controllers to respond by throttling system bandwidth, adjusting memory refresh rates or varying fan speeds. In addition, the new IDT temperature sensors can trigger shutdown of a subsystem if the temperature reaches a critical point, enhancing reliability. The IDT offering includes a stand-alone temperature sensor (TS3000B3), as well as one with an integrated 256-byte EEPROM array (TSE2002B3) on a single, monolithic die for non-volatile storage of user information, such as system configuration in a Serial Presence Detect (SPD) for memory modules.

The new IDT temperature sensor family is the first to exceed the requirements set forth by the Joint Electron Device Engineering Council (JEDEC) JC42.4 specification for Grade B temperature sensors, providing ±1°C temperature sensing accuracy over the entire temperature range of -20°C to +125°C, providing greater system accuracy. The devices also incorporate an innovative analog-to-digital converter (ADC) that delivers programmable resolution up to 12-bits (0.0625°C) with industry-leading conversion time, dramatically improving the overall precision of thermal control loops across temperature.

“IDT is well known for working with our customers to integrate embedded temperature sensors in our Advanced Memory Buffers and PCI Express switches. This allows us to provide customers with unparalleled power savings and adheres to our PowerSmart initiative,” said Mario Montana, vice president and general manager of the Enterprise Computing Division at IDT. “These new devices further leverage that expertise culminating in stand-alone temperature sensors with precision that exceeds industry standards.”

In addition, SMBus and I2C programming interfaces are fully supported, including SMBus timeout and I2C fast mode, input glitch filtering and power-up voltage hysteresis — all designed to enhance fault tolerance. This combination of performance and features make the IDT devices a perfect fit for robust computing systems with improved performance per watt.

Pricing and Availability

The IDT temperature sensor devices are currently sampling to qualified customers. They are available in 8-pin DFN and TDFN packages that are RoHS compliant. The TSE2002B3 is priced at $0.85 for 10,000 unit quantities and the TS3000B3 is priced at $0.75 for 10,000 unit quantities. For additional information on the devices, visit

About IDT

With the goal of continuously improving the digital media experience, IDT integrates its fundamental semiconductor heritage with essential innovation, developing and delivering low-power, mixed signal solutions that solve customer problems. Headquartered in San Jose, Calif., IDT has design, manufacturing and sales facilities throughout the world. IDT stock is traded on the NASDAQ Global Select Stock Market® under the symbol “IDTI.” Additional information about IDT is available at

IDT and the IDT logo are trademarks or registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.


IDT Corporate Communications
Mike Carroll, 408-360-1736
Email Contact
L&O PR Consulting for IDT
Paula Larson, 925-803-8977
Email Contact

Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Featured Video
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
Technical Support Engineer for EDA Careers at Freemont, CA
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
Verific: SystemVerilog & VHDL Parsers

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy