IAR Systems launches development tools for ARM Cortex-R4(F) processor

Comprehensive toolset provide full support for the ARM Cortex-R4(F) processor

Uppsala, Sweden — October 21, 2009 — IAR Systems today announced comprehensive support for ARM® Cortex™-R4(F) processor in version 5.40 of IAR Embedded Workbench for ARM.

IAR Embedded Workbench is a renowned set of development tools for embedded applications. The package includes an editor, project management tools, a C and C++ compiler that generates highly optimized code for the combined ARM/Thumb®-2 instruction set, a C-SPY simulator as well as run-time libraries, relocating assembler, linker and librarian tools. The compiler can check against the rules of MISRA C (MISRA C:2004) software development standard as established by the Motor Industry Software Reliability Association.

An evaluation edition of IAR PowerPac RTOS, file system, USB stack and a TCP/IP stack bundle is in included within the package. RTOS plugins are available from IAR Systems and other leading RTOS vendors.

“When the Cortex-R4 processor was launched initial licensees used it primarily for complex system-on-chip applications. We have now seen a clear trend where the Cortex-R4 processor is being incorporated in general purpose high-end microcontrollers intended for a wider audience. We welcome the support of IAR Systems and the launch of the new IAR Embedded Workbench with Cortex-R4 processor support as broad industry tools support is critical for the success of the processor and our partners,” says Haydn Povey, Director of Product Marketing for ARM’s Processor Division.

“IAR Systems has a strong position in automotive, safety-critical systems and industrial automation that fits well with the profile of the ARM Cortex-R4 processor and the markets it is targeting” says Mats Ullström, Product Director of IAR Systems. “The release of IAR Embedded Workbench for ARMv7R architecture-based Cortex-R4 processor is a proof of the commitment of IAR Systems to provide full support for the ARM processor architectures”.

About IAR Systems


IAR Systems is the world’s leading supplier of software tools for embedded systems that enable large and small companies to develop premium products based on 8-, 16-, and 32-bit microcontrollers, mainly in the areas of industrial automation, medical devices, consumer electronics and automotive products. IAR Systems has an extensive network of partners and cooperates with the world’s leading semiconductor vendors. Established in 1983, IAR Systems is part of the Intoi Group since 2005. For more information, please visit www.iar.com.



Contact:

Fredrik Medin
Marketing Manager
IAR Systems
Tel: +46 18 16 78 00
E-mail: Email Contact

Nadim Shehayed
US Manager
IAR Systems
Tel: +1-650- 287-4250
E-mail: Email Contact

Robert Huntley
Publitek Limited
United Kingdom
Tel: +44 (0) 1225 470000
E-mail: Email Contact
Fax: +44 (0) 1225 470047
Web: www.publitek.com




Review Article Be the first to review this article
Aldec Webinar Nov 30

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Computer History Museum: the Future of War is Here
More Editorial  
Jobs
Senior SW Developer for EDA Careers at San Jose, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
REVISED***Director Product Line RF/IC for EDA Careers at San Jose, CA
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
ASIC Design Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
“Empowering Leadership with WIT and WISDOM” at SEMI 673 South Milpitas Blvd. Milpitas CA - Nov 28, 2017
Artificial Intelligence and Convolution Neural Networks Discussion at San Jose State University Student Union Theater San Jose CA - Dec 4, 2017
Silicon Valley's Only Comprehensive Embedded Systems Conference at San Jose Convention Center 150 W. San Carlos St. San Jose CA - Dec 5 - 7, 2017
Oski Technology’s Decoding Formal Club Meeting at The Conference Center San Jose CA - Dec 7, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise