REMINDER: CICC Features Tanner EDA Users Presentation on Analog Circuit Design, Learn About What's Behind the Electronic Design of the Hubble Telescope Camera at CICC

SAN JOSE, CA -- (MARKET WIRE) -- Sep 15, 2009 --


Who/What:

The IEEE Custom Integrated Circuits Conference (CICC) will feature interactive poster presentations by Tanner EDA's analog, mixed-signal design software users about what's behind the electronic design of the Hubble's telescope camera. The session is titled, "A 1.5mW 16b ADC with Improved Segmentation and Centroiding Algorithms and Litho-Friendly Physical Design (LFD) Used in Space Telescope Imaging Applications" and is presented by L. Lewyn, SnowBush-Gennum and M. Loose, Teledyne Imaging Sensors. During the session, the images from the camera will be featured and are also shown at http://abcnews.go.com/Technology/Space/popup?id=1884338.

Tanner EDA is the world leader in PC-based analog, mixed-signal (A/MS) and MEMS circuit design software.

When and Where
Tuesday, September 15, 5:30 pm to 7:00 pm
DoubleTree Hotel
San Jose, California

More Information

For more information about Tanner EDA, please visit www.tannereda.com.

For more information about CICC, please visit http://www.ieee-cicc.org/.

About Tanner EDA Software

Tanner Tools Pro™ is a software suite for the design, layout and verification of analog, mixed-signal, RF and MEMS ICs. It includes S-Edit for schematic capture, T-Spice for analog circuit simulation and L-Edit for physical layout. HiPer Silicon™ builds on the capabilities of Tanner Tools Pro with advanced features that improve designer productivity, including the HiPer Verify foundry-compatible physical verification engine, Verilog-A simulation, an interactive autorouter, and device layout automation. Tanner EDA software is available on the Windows® and Linux® platforms with flexible node-locked and networked licensing configurations.

About Tanner EDA

Tanner EDA is a leading provider of PC-based electronic design automation (EDA) software solutions for the design, layout and verification of analog and mixed-signal ICs and MEMS. Its solutions help speed designs from concept to silicon and are used by thousands of companies to develop devices cost-effectively in the biomedical, consumer electronics, wireless, imaging, power management, RF and photovoltaic market segments. Founded in 1988, Tanner EDA is a division of privately held Tanner Research, Inc.

Tanner EDA has been in the EDA market for over 20 years, and has shipped over 25,000 licenses of its PC-based electronic design software to more than 4,000 customers in 67 countries.

For more information on Tanner EDA products, visit www.tannereda.com.

Acronyms:
A/MS: Analog and Mixed Signal
EDA: Electronic Design Automation
PC: Personal Computer
MEMS: Microelectromechanical Systems
RF: Radio Frequency

Linux is a registered trademark of Linus Torvalds.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Tanner Tools Pro and HiPer Silicon are trademarks of Tanner Research, Inc.

All other trademarks and tradenames are the property of their respective owners.

Add to Digg Bookmark with del.icio.us Add to Newsvine

Press Contact:

Georgia Marszalek
ValleyPR for Tanner EDA
+1 650 345 7477

Email Contact





Review Article Be the first to review this article

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
H-1B Visa: de Geus’ tragedy looms large
Peggy AycinenaIP Showcase
by Peggy Aycinena
IP for Cars: Lawsuits are like Sandstorms
More Editorial  
Jobs
ASIC/FPGA Design Engineer for Palo Alto Networks at Santa Clara, CA
Lead Java Platform Engineer IOT-WEB for EDA Careers at San Francisco Area, CA
Technical Support Engineer for EDA Careers at Freemont, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Mechanical Designer/Engineer for Palo Alto Networks at Santa Clara, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Embedded Systems Conference ESC Boston 2017 at Boston Convention & Exhibition Center Boston MA - May 3 - 4, 2017
2017 GPU Tech Conference at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - May 8 - 11, 2017
High Speed Digital Design and PCB Layout at 13727 460 Ct SE North Bend WA - May 9 - 11, 2017
Nanotech 2017 Conference & Expo at Gaylord National Hotel & Convention Center WA - May 14 - 17, 2017
DAC2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy