Intersil's New 5-Volt Low Drift pinPoint(TM) Operational Amplifier Features Industry's Highest Accuracy at High Gain and Lowest Power

MILPITAS, CA -- (MARKET WIRE) -- May 11, 2009 -- Intersil Corporation (NASDAQ: ISIL), a world leader in the design and manufacture of high-performance analog and mixed signal semiconductors, has launched the industry's most accurate 5V single-supply, precision, low-power, low-drift op amp for high gain, 16-bit and 24-bit precision applications. The new Intersil pinPoint™ ISL28133 implements advanced patented chopper-stabilized design to achieve high-gain accuracy with zero drift at extremely low power consumption.

Intersil's ISL28133 is a micro-power, zero-drift, rail-to-rail input and output operational amplifier optimized for single-supply operation from 1.65V to 5.5V. With ultra-low supply current and wide input ranges, the ISL28133 is ideal for process control or industrial equipment, portable medical systems, data acquisition products, diagnostic systems, or any applications requiring extremely high accuracy for sensor frontends with limited power consumption budgets. The ISL28133, which operates on voltages as low as 1.65V supply, is also an excellent design choice for handheld devices operating off two AA or single Li-Ion batteries.

Input offset voltage is 8µV, output noise measures just 1.1µV peak-peak, and a typical temperature drift of 20 nanovolts per degree/Celsius (nV/°C), providing maximum accuracy for signal chains in applications that require very low DC noise and high gain accuracy, such as sensor amplifier front-ends.

The ISL28133 is ideal as a sensor amp frontend for pressure, temperature and other inertial sensors. Additional applications include low Ohmic current sensing that are common in power supply and safety monitors where accuracy at high gain is critical. Offset drift is 0.075µV/oC maximum, ideal for accuracy over temperature. Low current consumption of 25µA (max) enables significant power savings for portable applications. Input bias current is 300pA maximum. This op amp operates over the extended temperature range of -40°C to +125°C.

Pricing and Availability

The ISL28133 is available in 5 Lead SOT-23; Pricing begins at $0.99 each in 1,000-piece quantities.

For more ISL28133 information please visit: http://www.intersil.com/cda/deviceinfo/0,1477,ISL28133.html

Note to editors: To view a high-resolution downloadable photo, please visit Intersil's photo room at: http://www.intersil.com/pressroom/photoarchives.asp.

About Intersil's pinPOINT™ Precision Analog Product Line

Intersil's new pinPOINT™ Precision Analog product line features a wide range of low-power devices that provide outstanding signal accuracy over time and temperature. The family of parts includes precision voltage references, precision op amps, instrumentation amplifiers, current-sensing amplifiers and data converters. All of Intersil's pinPOINT™ op amps are specified over the full automotive temperature range (-40C to 125C). For more information about Intersil's pinPOINT™ product line, visit the pinPOINT™ website at www.intersil.com/pinpoint.

About Intersil

Intersil Corporation is a leader in the design and manufacture of high-performance analog and mixed signal semiconductors. The Company's products address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, other handheld systems, and notebooks. Intersil's product families address power management functions and analog signal processing functions. Intersil products include ICs for battery management, hot-swap and hot-plug controllers, linear regulators, power sequencers, supervisory ICs, bridge drivers, PWM controllers, switching DC/DC regulators, Zilker Labs Digital Power ICs and power MOSFET drivers; optical storage laser diode drivers; DSL line drivers; D2Audio products; video and high-performance operational amplifiers; high-speed data converters; interface ICs; analog switches and multiplexers; crosspoint switches; voice-over-IP devices; and ICs for military, space and radiation-hardened applications. For more information about Intersil or to find out how to become a member of our winning team, visit the Company's web site and career page at www.intersil.com.





Review Article Be the first to review this article
Downstream : Solutuions for Post processing PCB Designs

Aldec Simulator Evaluate Now

Featured Video
Jobs
Principal PIC Hardware Controls Engineer for Infinera Corp at Sunnyvale, CA
Senior Formal FAE Location OPEN for EDA Careers at San Jose or Anywhere, CA
RF IC Design Engineering Manager for Intel at Santa Clara, CA
Senior PIC Test Development Engineer for Infinera Corp at Sunnyvale, CA
ASIC Design Engineer for Infinera Corp at Sunnyvale, CA
Upcoming Events
IC Open Innovation Panel During REUSE 2017 at Santa Clara Convention Center 5001 Great America Parkway Santa Clara CA - Dec 14, 2017
Essentials of Electronic Technology: A Crash Course at Columbia MD - Jan 16 - 18, 2018
Essentials of Digital Technology at MD - Feb 13 - 14, 2018
CST: Webinar series
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: UltraPLL



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise